1 /*
   2  * CDDL HEADER START
   3  *
   4  * The contents of this file are subject to the terms of the
   5  * Common Development and Distribution License (the "License").
   6  * You may not use this file except in compliance with the License.
   7  *
   8  * You can obtain a copy of the license at
   9  * http://www.opensource.org/licenses/cddl1.txt.
  10  * See the License for the specific language governing permissions
  11  * and limitations under the License.
  12  *
  13  * When distributing Covered Code, include this CDDL HEADER in each
  14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15  * If applicable, add the following below this CDDL HEADER, with the
  16  * fields enclosed by brackets "[]" replaced with your own identifying
  17  * information: Portions Copyright [yyyy] [name of copyright owner]
  18  *
  19  * CDDL HEADER END
  20  */
  21 
  22 /*
  23  * Copyright (c) 2004-2012 Emulex. All rights reserved.
  24  * Use is subject to license terms.
  25  */
  26 
  27 #define DEF_ICFG        1
  28 
  29 #include <emlxs.h>
  30 #include <emlxs_version.h>
  31 
  32 
  33 static char emlxs_copyright[] = EMLXS_COPYRIGHT;
  34 char emlxs_revision[] = EMLXS_REVISION;
  35 char emlxs_version[] = EMLXS_VERSION;
  36 char emlxs_name[] = EMLXS_NAME;
  37 char emlxs_label[] = EMLXS_LABEL;
  38 
  39 /* Required for EMLXS_CONTEXT in EMLXS_MSGF calls */
  40 EMLXS_MSG_DEF(EMLXS_SOLARIS_C);
  41 
  42 #ifdef MENLO_SUPPORT
  43 static int32_t  emlxs_send_menlo(emlxs_port_t *port, emlxs_buf_t *sbp);
  44 #endif /* MENLO_SUPPORT */
  45 
  46 static void     emlxs_fca_attach(emlxs_hba_t *hba);
  47 static void     emlxs_fca_detach(emlxs_hba_t *hba);
  48 static void     emlxs_drv_banner(emlxs_hba_t *hba);
  49 
  50 static int32_t  emlxs_get_props(emlxs_hba_t *hba);
  51 static int32_t  emlxs_send_fcp_cmd(emlxs_port_t *port, emlxs_buf_t *sbp,
  52                     uint32_t *pkt_flags);
  53 static int32_t  emlxs_send_fct_status(emlxs_port_t *port, emlxs_buf_t *sbp);
  54 static int32_t  emlxs_send_fct_abort(emlxs_port_t *port, emlxs_buf_t *sbp);
  55 static int32_t  emlxs_send_ip(emlxs_port_t *port, emlxs_buf_t *sbp);
  56 static int32_t  emlxs_send_els(emlxs_port_t *port, emlxs_buf_t *sbp);
  57 static int32_t  emlxs_send_els_rsp(emlxs_port_t *port, emlxs_buf_t *sbp);
  58 static int32_t  emlxs_send_ct(emlxs_port_t *port, emlxs_buf_t *sbp);
  59 static int32_t  emlxs_send_ct_rsp(emlxs_port_t *port, emlxs_buf_t *sbp);
  60 static uint32_t emlxs_add_instance(int32_t ddiinst);
  61 static void     emlxs_iodone(emlxs_buf_t *sbp);
  62 static int      emlxs_pm_lower_power(dev_info_t *dip);
  63 static int      emlxs_pm_raise_power(dev_info_t *dip);
  64 static void     emlxs_driver_remove(dev_info_t *dip, uint32_t init_flag,
  65                     uint32_t failed);
  66 static void     emlxs_iodone_server(void *arg1, void *arg2, void *arg3);
  67 static uint32_t emlxs_integrity_check(emlxs_hba_t *hba);
  68 static uint32_t emlxs_test(emlxs_hba_t *hba, uint32_t test_code,
  69                     uint32_t args, uint32_t *arg);
  70 
  71 #if (EMLXS_MODREV >= EMLXS_MODREV3) && (EMLXS_MODREV <= EMLXS_MODREV4)
  72 static void     emlxs_read_vport_prop(emlxs_hba_t *hba);
  73 #endif  /* EMLXS_MODREV3 && EMLXS_MODREV4 */
  74 
  75 static void     emlxs_mode_init_masks(emlxs_hba_t *hba);
  76 
  77 
  78 extern int
  79 emlxs_msiid_to_chan(emlxs_hba_t *hba, int msi_id);
  80 extern int
  81 emlxs_select_msiid(emlxs_hba_t *hba);
  82 extern void
  83 emlxs_sli4_zero_queue_stat(emlxs_hba_t *hba);
  84 
  85 /*
  86  * Driver Entry Routines.
  87  */
  88 static int32_t  emlxs_detach(dev_info_t *, ddi_detach_cmd_t);
  89 static int32_t  emlxs_attach(dev_info_t *, ddi_attach_cmd_t);
  90 static int32_t  emlxs_open(dev_t *, int32_t, int32_t, cred_t *);
  91 static int32_t  emlxs_close(dev_t, int32_t, int32_t, cred_t *);
  92 static int32_t  emlxs_ioctl(dev_t, int32_t, intptr_t, int32_t,
  93                     cred_t *, int32_t *);
  94 static int32_t  emlxs_info(dev_info_t *, ddi_info_cmd_t, void *, void **);
  95 
  96 
  97 /*
  98  * FC_AL Transport Functions.
  99  */
 100 static opaque_t emlxs_fca_bind_port(dev_info_t *, fc_fca_port_info_t *,
 101                     fc_fca_bind_info_t *);
 102 static void     emlxs_fca_unbind_port(opaque_t);
 103 static void     emlxs_initialize_pkt(emlxs_port_t *, emlxs_buf_t *);
 104 static int32_t  emlxs_fca_get_cap(opaque_t, char *, void *);
 105 static int32_t  emlxs_fca_set_cap(opaque_t, char *, void *);
 106 static int32_t  emlxs_fca_get_map(opaque_t, fc_lilpmap_t *);
 107 static int32_t  emlxs_fca_ub_alloc(opaque_t, uint64_t *, uint32_t,
 108                     uint32_t *, uint32_t);
 109 static int32_t  emlxs_fca_ub_free(opaque_t, uint32_t, uint64_t *);
 110 
 111 static opaque_t emlxs_fca_get_device(opaque_t, fc_portid_t);
 112 static int32_t  emlxs_fca_notify(opaque_t, uint32_t);
 113 static void     emlxs_ub_els_reject(emlxs_port_t *, fc_unsol_buf_t *);
 114 
 115 /*
 116  * Driver Internal Functions.
 117  */
 118 
 119 static void     emlxs_poll(emlxs_port_t *, emlxs_buf_t *);
 120 static int32_t  emlxs_power(dev_info_t *, int32_t, int32_t);
 121 #ifdef EMLXS_I386
 122 #ifdef S11
 123 static int32_t  emlxs_quiesce(dev_info_t *);
 124 #endif /* S11 */
 125 #endif /* EMLXS_I386 */
 126 static int32_t  emlxs_hba_resume(dev_info_t *);
 127 static int32_t  emlxs_hba_suspend(dev_info_t *);
 128 static int32_t  emlxs_hba_detach(dev_info_t *);
 129 static int32_t  emlxs_hba_attach(dev_info_t *);
 130 static void     emlxs_lock_destroy(emlxs_hba_t *);
 131 static void     emlxs_lock_init(emlxs_hba_t *);
 132 
 133 char *emlxs_pm_components[] = {
 134         "NAME=" DRIVER_NAME "000",
 135         "0=Device D3 State",
 136         "1=Device D0 State"
 137 };
 138 
 139 
 140 /*
 141  * Default emlx dma limits
 142  */
 143 ddi_dma_lim_t emlxs_dma_lim = {
 144         (uint32_t)0,                            /* dlim_addr_lo */
 145         (uint32_t)0xffffffff,                   /* dlim_addr_hi */
 146         (uint_t)0x00ffffff,                     /* dlim_cntr_max */
 147         DEFAULT_BURSTSIZE | BURST32 | BURST64,  /* dlim_burstsizes */
 148         1,                                      /* dlim_minxfer */
 149         0x00ffffff                              /* dlim_dmaspeed */
 150 };
 151 
 152 /*
 153  * Be careful when using these attributes; the defaults listed below are
 154  * (almost) the most general case, permitting allocation in almost any
 155  * way supported by the LightPulse family.  The sole exception is the
 156  * alignment specified as requiring memory allocation on a 4-byte boundary;
 157  * the Lightpulse can DMA memory on any byte boundary.
 158  *
 159  * The LightPulse family currently is limited to 16M transfers;
 160  * this restriction affects the dma_attr_count_max and dma_attr_maxxfer fields.
 161  */
 162 ddi_dma_attr_t emlxs_dma_attr = {
 163         DMA_ATTR_V0,                            /* dma_attr_version */
 164         (uint64_t)0,                            /* dma_attr_addr_lo */
 165         (uint64_t)0xffffffffffffffff,           /* dma_attr_addr_hi */
 166         (uint64_t)0x00ffffff,                   /* dma_attr_count_max */
 167         1,                                      /* dma_attr_align */
 168         DEFAULT_BURSTSIZE | BURST32 | BURST64,  /* dma_attr_burstsizes */
 169         1,                                      /* dma_attr_minxfer */
 170         (uint64_t)0x00ffffff,                   /* dma_attr_maxxfer */
 171         (uint64_t)0xffffffff,                   /* dma_attr_seg */
 172         1,                                      /* dma_attr_sgllen */
 173         1,                                      /* dma_attr_granular */
 174         0                                       /* dma_attr_flags */
 175 };
 176 
 177 ddi_dma_attr_t emlxs_dma_attr_ro = {
 178         DMA_ATTR_V0,                            /* dma_attr_version */
 179         (uint64_t)0,                            /* dma_attr_addr_lo */
 180         (uint64_t)0xffffffffffffffff,           /* dma_attr_addr_hi */
 181         (uint64_t)0x00ffffff,                   /* dma_attr_count_max */
 182         1,                                      /* dma_attr_align */
 183         DEFAULT_BURSTSIZE | BURST32 | BURST64,  /* dma_attr_burstsizes */
 184         1,                                      /* dma_attr_minxfer */
 185         (uint64_t)0x00ffffff,                   /* dma_attr_maxxfer */
 186         (uint64_t)0xffffffff,                   /* dma_attr_seg */
 187         1,                                      /* dma_attr_sgllen */
 188         1,                                      /* dma_attr_granular */
 189         DDI_DMA_RELAXED_ORDERING                /* dma_attr_flags */
 190 };
 191 
 192 ddi_dma_attr_t emlxs_dma_attr_1sg = {
 193         DMA_ATTR_V0,                            /* dma_attr_version */
 194         (uint64_t)0,                            /* dma_attr_addr_lo */
 195         (uint64_t)0xffffffffffffffff,           /* dma_attr_addr_hi */
 196         (uint64_t)0x00ffffff,                   /* dma_attr_count_max */
 197         1,                                      /* dma_attr_align */
 198         DEFAULT_BURSTSIZE | BURST32 | BURST64,  /* dma_attr_burstsizes */
 199         1,                                      /* dma_attr_minxfer */
 200         (uint64_t)0x00ffffff,                   /* dma_attr_maxxfer */
 201         (uint64_t)0xffffffff,                   /* dma_attr_seg */
 202         1,                                      /* dma_attr_sgllen */
 203         1,                                      /* dma_attr_granular */
 204         0                                       /* dma_attr_flags */
 205 };
 206 
 207 #if (EMLXS_MODREV >= EMLXS_MODREV3)
 208 ddi_dma_attr_t emlxs_dma_attr_fcip_rsp = {
 209         DMA_ATTR_V0,                            /* dma_attr_version */
 210         (uint64_t)0,                            /* dma_attr_addr_lo */
 211         (uint64_t)0xffffffffffffffff,           /* dma_attr_addr_hi */
 212         (uint64_t)0x00ffffff,                   /* dma_attr_count_max */
 213         1,                                      /* dma_attr_align */
 214         DEFAULT_BURSTSIZE | BURST32 | BURST64,  /* dma_attr_burstsizes */
 215         1,                                      /* dma_attr_minxfer */
 216         (uint64_t)0x00ffffff,                   /* dma_attr_maxxfer */
 217         (uint64_t)0xffffffff,                   /* dma_attr_seg */
 218         1,                                      /* dma_attr_sgllen */
 219         1,                                      /* dma_attr_granular */
 220         0                                       /* dma_attr_flags */
 221 };
 222 #endif  /* >= EMLXS_MODREV3 */
 223 
 224 /*
 225  * DDI access attributes for device
 226  */
 227 ddi_device_acc_attr_t emlxs_dev_acc_attr = {
 228         DDI_DEVICE_ATTR_V1,     /* devacc_attr_version          */
 229         DDI_STRUCTURE_LE_ACC,   /* PCI is Little Endian         */
 230         DDI_STRICTORDER_ACC,    /* devacc_attr_dataorder        */
 231         DDI_DEFAULT_ACC         /* devacc_attr_access           */
 232 };
 233 
 234 /*
 235  * DDI access attributes for data
 236  */
 237 ddi_device_acc_attr_t emlxs_data_acc_attr = {
 238         DDI_DEVICE_ATTR_V1,     /* devacc_attr_version          */
 239         DDI_NEVERSWAP_ACC,      /* don't swap for Data          */
 240         DDI_STRICTORDER_ACC,    /* devacc_attr_dataorder        */
 241         DDI_DEFAULT_ACC         /* devacc_attr_access           */
 242 };
 243 
 244 /*
 245  * Fill in the FC Transport structure,
 246  * as defined in the Fibre Channel Transport Programmming Guide.
 247  */
 248 #if (EMLXS_MODREV == EMLXS_MODREV5)
 249         static fc_fca_tran_t emlxs_fca_tran = {
 250         FCTL_FCA_MODREV_5,              /* fca_version, with SUN NPIV support */
 251         MAX_VPORTS,                     /* fca numerb of ports */
 252         sizeof (emlxs_buf_t),           /* fca pkt size */
 253         2048,                           /* fca cmd max */
 254         &emlxs_dma_lim,                     /* fca dma limits */
 255         0,                              /* fca iblock, to be filled in later */
 256         &emlxs_dma_attr,            /* fca dma attributes */
 257         &emlxs_dma_attr_1sg,                /* fca dma fcp cmd attributes */
 258         &emlxs_dma_attr_1sg,                /* fca dma fcp rsp attributes */
 259         &emlxs_dma_attr_ro,         /* fca dma fcp data attributes */
 260         &emlxs_dma_attr_1sg,                /* fca dma fcip cmd attributes */
 261         &emlxs_dma_attr_fcip_rsp,   /* fca dma fcip rsp attributes */
 262         &emlxs_dma_attr_1sg,                /* fca dma fcsm cmd attributes */
 263         &emlxs_dma_attr,            /* fca dma fcsm rsp attributes */
 264         &emlxs_data_acc_attr,       /* fca access atributes */
 265         0,                              /* fca_num_npivports */
 266         {0, 0, 0, 0, 0, 0, 0, 0},       /* Physical port WWPN */
 267         emlxs_fca_bind_port,
 268         emlxs_fca_unbind_port,
 269         emlxs_fca_pkt_init,
 270         emlxs_fca_pkt_uninit,
 271         emlxs_fca_transport,
 272         emlxs_fca_get_cap,
 273         emlxs_fca_set_cap,
 274         emlxs_fca_get_map,
 275         emlxs_fca_transport,
 276         emlxs_fca_ub_alloc,
 277         emlxs_fca_ub_free,
 278         emlxs_fca_ub_release,
 279         emlxs_fca_pkt_abort,
 280         emlxs_fca_reset,
 281         emlxs_fca_port_manage,
 282         emlxs_fca_get_device,
 283         emlxs_fca_notify
 284 };
 285 #endif  /* EMLXS_MODREV5 */
 286 
 287 
 288 #if (EMLXS_MODREV == EMLXS_MODREV4)
 289 static fc_fca_tran_t emlxs_fca_tran = {
 290         FCTL_FCA_MODREV_4,              /* fca_version */
 291         MAX_VPORTS,                     /* fca numerb of ports */
 292         sizeof (emlxs_buf_t),           /* fca pkt size */
 293         2048,                           /* fca cmd max */
 294         &emlxs_dma_lim,                     /* fca dma limits */
 295         0,                              /* fca iblock, to be filled in later */
 296         &emlxs_dma_attr,            /* fca dma attributes */
 297         &emlxs_dma_attr_1sg,                /* fca dma fcp cmd attributes */
 298         &emlxs_dma_attr_1sg,                /* fca dma fcp rsp attributes */
 299         &emlxs_dma_attr_ro,         /* fca dma fcp data attributes */
 300         &emlxs_dma_attr_1sg,                /* fca dma fcip cmd attributes */
 301         &emlxs_dma_attr_fcip_rsp,   /* fca dma fcip rsp attributes */
 302         &emlxs_dma_attr_1sg,                /* fca dma fcsm cmd attributes */
 303         &emlxs_dma_attr,            /* fca dma fcsm rsp attributes */
 304         &emlxs_data_acc_attr,               /* fca access atributes */
 305         emlxs_fca_bind_port,
 306         emlxs_fca_unbind_port,
 307         emlxs_fca_pkt_init,
 308         emlxs_fca_pkt_uninit,
 309         emlxs_fca_transport,
 310         emlxs_fca_get_cap,
 311         emlxs_fca_set_cap,
 312         emlxs_fca_get_map,
 313         emlxs_fca_transport,
 314         emlxs_fca_ub_alloc,
 315         emlxs_fca_ub_free,
 316         emlxs_fca_ub_release,
 317         emlxs_fca_pkt_abort,
 318         emlxs_fca_reset,
 319         emlxs_fca_port_manage,
 320         emlxs_fca_get_device,
 321         emlxs_fca_notify
 322 };
 323 #endif  /* EMLXS_MODEREV4 */
 324 
 325 
 326 #if (EMLXS_MODREV == EMLXS_MODREV3)
 327 static fc_fca_tran_t emlxs_fca_tran = {
 328         FCTL_FCA_MODREV_3,              /* fca_version */
 329         MAX_VPORTS,                     /* fca numerb of ports */
 330         sizeof (emlxs_buf_t),           /* fca pkt size */
 331         2048,                           /* fca cmd max */
 332         &emlxs_dma_lim,                     /* fca dma limits */
 333         0,                              /* fca iblock, to be filled in later */
 334         &emlxs_dma_attr,            /* fca dma attributes */
 335         &emlxs_dma_attr_1sg,                /* fca dma fcp cmd attributes */
 336         &emlxs_dma_attr_1sg,                /* fca dma fcp rsp attributes */
 337         &emlxs_dma_attr_ro,         /* fca dma fcp data attributes */
 338         &emlxs_dma_attr_1sg,                /* fca dma fcip cmd attributes */
 339         &emlxs_dma_attr_fcip_rsp,   /* fca dma fcip rsp attributes */
 340         &emlxs_dma_attr_1sg,                /* fca dma fcsm cmd attributes */
 341         &emlxs_dma_attr,            /* fca dma fcsm rsp attributes */
 342         &emlxs_data_acc_attr,               /* fca access atributes */
 343         emlxs_fca_bind_port,
 344         emlxs_fca_unbind_port,
 345         emlxs_fca_pkt_init,
 346         emlxs_fca_pkt_uninit,
 347         emlxs_fca_transport,
 348         emlxs_fca_get_cap,
 349         emlxs_fca_set_cap,
 350         emlxs_fca_get_map,
 351         emlxs_fca_transport,
 352         emlxs_fca_ub_alloc,
 353         emlxs_fca_ub_free,
 354         emlxs_fca_ub_release,
 355         emlxs_fca_pkt_abort,
 356         emlxs_fca_reset,
 357         emlxs_fca_port_manage,
 358         emlxs_fca_get_device,
 359         emlxs_fca_notify
 360 };
 361 #endif  /* EMLXS_MODREV3 */
 362 
 363 
 364 #if (EMLXS_MODREV == EMLXS_MODREV2)
 365 static fc_fca_tran_t emlxs_fca_tran = {
 366         FCTL_FCA_MODREV_2,              /* fca_version */
 367         MAX_VPORTS,                     /* number of ports */
 368         sizeof (emlxs_buf_t),           /* pkt size */
 369         2048,                           /* max cmds */
 370         &emlxs_dma_lim,                     /* DMA limits */
 371         0,                              /* iblock, to be filled in later */
 372         &emlxs_dma_attr,            /* dma attributes */
 373         &emlxs_data_acc_attr,               /* access atributes */
 374         emlxs_fca_bind_port,
 375         emlxs_fca_unbind_port,
 376         emlxs_fca_pkt_init,
 377         emlxs_fca_pkt_uninit,
 378         emlxs_fca_transport,
 379         emlxs_fca_get_cap,
 380         emlxs_fca_set_cap,
 381         emlxs_fca_get_map,
 382         emlxs_fca_transport,
 383         emlxs_fca_ub_alloc,
 384         emlxs_fca_ub_free,
 385         emlxs_fca_ub_release,
 386         emlxs_fca_pkt_abort,
 387         emlxs_fca_reset,
 388         emlxs_fca_port_manage,
 389         emlxs_fca_get_device,
 390         emlxs_fca_notify
 391 };
 392 #endif  /* EMLXS_MODREV2 */
 393 
 394 
 395 /*
 396  * state pointer which the implementation uses as a place to
 397  * hang a set of per-driver structures;
 398  *
 399  */
 400 void            *emlxs_soft_state = NULL;
 401 
 402 /*
 403  * Driver Global variables.
 404  */
 405 int32_t         emlxs_scsi_reset_delay = 3000;  /* milliseconds */
 406 
 407 emlxs_device_t  emlxs_device;
 408 
 409 uint32_t        emlxs_instance[MAX_FC_BRDS];    /* uses emlxs_device.lock */
 410 uint32_t        emlxs_instance_count = 0;       /* uses emlxs_device.lock */
 411 uint32_t        emlxs_instance_flag = 0;        /* uses emlxs_device.lock */
 412 #define EMLXS_FW_SHOW           0x00000001
 413 
 414 
 415 /*
 416  * CB ops vector.  Used for administration only.
 417  */
 418 static struct cb_ops emlxs_cb_ops = {
 419         emlxs_open,     /* cb_open      */
 420         emlxs_close,    /* cb_close     */
 421         nodev,          /* cb_strategy  */
 422         nodev,          /* cb_print     */
 423         nodev,          /* cb_dump      */
 424         nodev,          /* cb_read      */
 425         nodev,          /* cb_write     */
 426         emlxs_ioctl,    /* cb_ioctl     */
 427         nodev,          /* cb_devmap    */
 428         nodev,          /* cb_mmap      */
 429         nodev,          /* cb_segmap    */
 430         nochpoll,       /* cb_chpoll    */
 431         ddi_prop_op,    /* cb_prop_op   */
 432         0,              /* cb_stream    */
 433 #ifdef _LP64
 434         D_64BIT | D_HOTPLUG | D_MP | D_NEW,     /* cb_flag */
 435 #else
 436         D_HOTPLUG | D_MP | D_NEW,               /* cb_flag */
 437 #endif
 438         CB_REV,         /* rev          */
 439         nodev,          /* cb_aread     */
 440         nodev           /* cb_awrite    */
 441 };
 442 
 443 static struct dev_ops emlxs_ops = {
 444         DEVO_REV,       /* rev */
 445         0,      /* refcnt */
 446         emlxs_info,     /* getinfo      */
 447         nulldev,        /* identify     */
 448         nulldev,        /* probe        */
 449         emlxs_attach,   /* attach       */
 450         emlxs_detach,   /* detach       */
 451         nodev,          /* reset        */
 452         &emlxs_cb_ops,      /* devo_cb_ops  */
 453         NULL,           /* devo_bus_ops */
 454         emlxs_power,    /* power ops    */
 455 #ifdef EMLXS_I386
 456 #ifdef S11
 457         emlxs_quiesce,  /* quiesce      */
 458 #endif /* S11 */
 459 #endif /* EMLXS_I386 */
 460 };
 461 
 462 #include <sys/modctl.h>
 463 extern struct mod_ops mod_driverops;
 464 
 465 #ifdef SAN_DIAG_SUPPORT
 466 extern kmutex_t         emlxs_sd_bucket_mutex;
 467 extern sd_bucket_info_t emlxs_sd_bucket;
 468 #endif /* SAN_DIAG_SUPPORT */
 469 
 470 /*
 471  * Module linkage information for the kernel.
 472  */
 473 static struct modldrv emlxs_modldrv = {
 474         &mod_driverops,     /* module type - driver */
 475         emlxs_name,     /* module name */
 476         &emlxs_ops, /* driver ops */
 477 };
 478 
 479 
 480 /*
 481  * Driver module linkage structure
 482  */
 483 static struct modlinkage emlxs_modlinkage = {
 484         MODREV_1,       /* ml_rev - must be MODREV_1 */
 485         &emlxs_modldrv,     /* ml_linkage */
 486         NULL    /* end of driver linkage */
 487 };
 488 
 489 
 490 /* We only need to add entries for non-default return codes. */
 491 /* Entries do not need to be in order. */
 492 /* Default:     FC_PKT_TRAN_ERROR,      FC_REASON_ABORTED, */
 493 /*              FC_EXPLN_NONE,          FC_ACTION_RETRYABLE */
 494 
 495 emlxs_xlat_err_t emlxs_iostat_tbl[] = {
 496 /*      {f/w code, pkt_state, pkt_reason,       */
 497 /*              pkt_expln, pkt_action}          */
 498 
 499         /* 0x00 - Do not remove */
 500         {IOSTAT_SUCCESS, FC_PKT_SUCCESS, FC_REASON_NONE,
 501                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 502 
 503         /* 0x01 - Do not remove */
 504         {IOSTAT_FCP_RSP_ERROR, FC_PKT_SUCCESS, FC_REASON_NONE,
 505                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 506 
 507         /* 0x02 */
 508         {IOSTAT_REMOTE_STOP, FC_PKT_REMOTE_STOP, FC_REASON_ABTS,
 509                 FC_EXPLN_NONE, FC_ACTION_NON_RETRYABLE},
 510 
 511         /*
 512          * This is a default entry.
 513          * The real codes are written dynamically in emlxs_els.c
 514          */
 515         /* 0x09 */
 516         {IOSTAT_LS_RJT, FC_PKT_LS_RJT, FC_REASON_CMD_UNABLE,
 517                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 518 
 519         /* Special error code */
 520         /* 0x10 */
 521         {IOSTAT_DATA_OVERRUN, FC_PKT_TRAN_ERROR, FC_REASON_OVERRUN,
 522                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 523 
 524         /* Special error code */
 525         /* 0x11 */
 526         {IOSTAT_DATA_UNDERRUN, FC_PKT_TRAN_ERROR, FC_REASON_ABORTED,
 527                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 528 
 529         /* Special error code */
 530         /* 0x12 */
 531         {IOSTAT_RSP_INVALID, FC_PKT_TRAN_ERROR, FC_REASON_ABORTED,
 532                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 533 
 534         /* CLASS 2 only */
 535         /* 0x04 */
 536         {IOSTAT_NPORT_RJT, FC_PKT_NPORT_RJT, FC_REASON_PROTOCOL_ERROR,
 537                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 538 
 539         /* CLASS 2 only */
 540         /* 0x05 */
 541         {IOSTAT_FABRIC_RJT, FC_PKT_FABRIC_RJT, FC_REASON_PROTOCOL_ERROR,
 542                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 543 
 544         /* CLASS 2 only */
 545         /* 0x06 */
 546         {IOSTAT_NPORT_BSY, FC_PKT_NPORT_BSY, FC_REASON_PHYSICAL_BUSY,
 547                 FC_EXPLN_NONE, FC_ACTION_SEQ_TERM_RETRY},
 548 
 549         /* CLASS 2 only */
 550         /* 0x07 */
 551         {IOSTAT_FABRIC_BSY, FC_PKT_FABRIC_BSY, FC_REASON_FABRIC_BSY,
 552                 FC_EXPLN_NONE, FC_ACTION_SEQ_TERM_RETRY},
 553 };
 554 
 555 #define IOSTAT_MAX (sizeof (emlxs_iostat_tbl)/sizeof (emlxs_xlat_err_t))
 556 
 557 
 558 /* We only need to add entries for non-default return codes. */
 559 /* Entries do not need to be in order. */
 560 /* Default:     FC_PKT_TRAN_ERROR,      FC_REASON_ABORTED, */
 561 /*              FC_EXPLN_NONE,          FC_ACTION_RETRYABLE} */
 562 
 563 emlxs_xlat_err_t emlxs_ioerr_tbl[] = {
 564 /*      {f/w code, pkt_state, pkt_reason,       */
 565 /*              pkt_expln, pkt_action}          */
 566 
 567         /* 0x01 */
 568         {IOERR_MISSING_CONTINUE, FC_PKT_TRAN_ERROR, FC_REASON_OVERRUN,
 569                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 570 
 571         /* 0x02 */
 572         {IOERR_SEQUENCE_TIMEOUT, FC_PKT_TIMEOUT, FC_REASON_SEQ_TIMEOUT,
 573                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 574 
 575         /* 0x04 */
 576         {IOERR_INVALID_RPI, FC_PKT_PORT_OFFLINE, FC_REASON_OFFLINE,
 577                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 578 
 579         /* 0x05 */
 580         {IOERR_NO_XRI, FC_PKT_LOCAL_RJT, FC_REASON_XCHG_DROPPED,
 581                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 582 
 583         /* 0x06 */
 584         {IOERR_ILLEGAL_COMMAND, FC_PKT_LOCAL_RJT, FC_REASON_ILLEGAL_REQ,
 585                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 586 
 587         /* 0x07 */
 588         {IOERR_XCHG_DROPPED, FC_PKT_LOCAL_RJT,  FC_REASON_XCHG_DROPPED,
 589                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 590 
 591         /* 0x08 */
 592         {IOERR_ILLEGAL_FIELD, FC_PKT_LOCAL_RJT, FC_REASON_ILLEGAL_REQ,
 593                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 594 
 595         /* 0x0B */
 596         {IOERR_RCV_BUFFER_WAITING, FC_PKT_LOCAL_RJT, FC_REASON_NOMEM,
 597                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 598 
 599         /* 0x0D */
 600         {IOERR_TX_DMA_FAILED, FC_PKT_LOCAL_RJT, FC_REASON_DMA_ERROR,
 601                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 602 
 603         /* 0x0E */
 604         {IOERR_RX_DMA_FAILED, FC_PKT_LOCAL_RJT, FC_REASON_DMA_ERROR,
 605                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 606 
 607         /* 0x0F */
 608         {IOERR_ILLEGAL_FRAME, FC_PKT_LOCAL_RJT, FC_REASON_ILLEGAL_FRAME,
 609                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 610 
 611         /* 0x11 */
 612         {IOERR_NO_RESOURCES, FC_PKT_LOCAL_RJT,  FC_REASON_NOMEM,
 613                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 614 
 615         /* 0x13 */
 616         {IOERR_ILLEGAL_LENGTH, FC_PKT_LOCAL_RJT, FC_REASON_ILLEGAL_LENGTH,
 617                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 618 
 619         /* 0x14 */
 620         {IOERR_UNSUPPORTED_FEATURE, FC_PKT_LOCAL_RJT, FC_REASON_UNSUPPORTED,
 621                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 622 
 623         /* 0x15 */
 624         {IOERR_ABORT_IN_PROGRESS, FC_PKT_LOCAL_RJT, FC_REASON_ABORTED,
 625                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 626 
 627         /* 0x16 */
 628         {IOERR_ABORT_REQUESTED, FC_PKT_LOCAL_RJT, FC_REASON_ABORTED,
 629                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 630 
 631         /* 0x17 */
 632         {IOERR_RCV_BUFFER_TIMEOUT, FC_PKT_LOCAL_RJT, FC_REASON_RX_BUF_TIMEOUT,
 633                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 634 
 635         /* 0x18 */
 636         {IOERR_LOOP_OPEN_FAILURE, FC_PKT_LOCAL_RJT, FC_REASON_FCAL_OPN_FAIL,
 637                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 638 
 639         /* 0x1A */
 640         {IOERR_LINK_DOWN, FC_PKT_PORT_OFFLINE, FC_REASON_OFFLINE,
 641                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 642 
 643         /* 0x21 */
 644         {IOERR_BAD_HOST_ADDRESS, FC_PKT_LOCAL_RJT, FC_REASON_BAD_SID,
 645                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 646 
 647         /* Occurs at link down */
 648         /* 0x28 */
 649         {IOERR_BUFFER_SHORTAGE, FC_PKT_PORT_OFFLINE, FC_REASON_OFFLINE,
 650                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 651 
 652         /* 0xF0 */
 653         {IOERR_ABORT_TIMEOUT, FC_PKT_TIMEOUT, FC_REASON_SEQ_TIMEOUT,
 654                 FC_EXPLN_NONE, FC_ACTION_RETRYABLE},
 655 };
 656 
 657 #define IOERR_MAX    (sizeof (emlxs_ioerr_tbl)/sizeof (emlxs_xlat_err_t))
 658 
 659 
 660 
 661 emlxs_table_t emlxs_error_table[] = {
 662         {IOERR_SUCCESS, "No error."},
 663         {IOERR_MISSING_CONTINUE, "Missing continue."},
 664         {IOERR_SEQUENCE_TIMEOUT, "Sequence timeout."},
 665         {IOERR_INTERNAL_ERROR, "Internal error."},
 666         {IOERR_INVALID_RPI, "Invalid RPI."},
 667         {IOERR_NO_XRI, "No XRI."},
 668         {IOERR_ILLEGAL_COMMAND, "Illegal command."},
 669         {IOERR_XCHG_DROPPED, "Exchange dropped."},
 670         {IOERR_ILLEGAL_FIELD, "Illegal field."},
 671         {IOERR_RCV_BUFFER_WAITING, "RX buffer waiting."},
 672         {IOERR_TX_DMA_FAILED, "TX DMA failed."},
 673         {IOERR_RX_DMA_FAILED, "RX DMA failed."},
 674         {IOERR_ILLEGAL_FRAME, "Illegal frame."},
 675         {IOERR_NO_RESOURCES, "No resources."},
 676         {IOERR_ILLEGAL_LENGTH, "Illegal length."},
 677         {IOERR_UNSUPPORTED_FEATURE, "Unsupported feature."},
 678         {IOERR_ABORT_IN_PROGRESS, "Abort in progess."},
 679         {IOERR_ABORT_REQUESTED, "Abort requested."},
 680         {IOERR_RCV_BUFFER_TIMEOUT, "RX buffer timeout."},
 681         {IOERR_LOOP_OPEN_FAILURE, "Loop open failed."},
 682         {IOERR_RING_RESET, "Ring reset."},
 683         {IOERR_LINK_DOWN, "Link down."},
 684         {IOERR_CORRUPTED_DATA, "Corrupted data."},
 685         {IOERR_CORRUPTED_RPI, "Corrupted RPI."},
 686         {IOERR_OUT_OF_ORDER_DATA, "Out-of-order data."},
 687         {IOERR_OUT_OF_ORDER_ACK, "Out-of-order ack."},
 688         {IOERR_DUP_FRAME, "Duplicate frame."},
 689         {IOERR_LINK_CONTROL_FRAME, "Link control frame."},
 690         {IOERR_BAD_HOST_ADDRESS, "Bad host address."},
 691         {IOERR_RCV_HDRBUF_WAITING, "RX header buffer waiting."},
 692         {IOERR_MISSING_HDR_BUFFER, "Missing header buffer."},
 693         {IOERR_MSEQ_CHAIN_CORRUPTED, "MSEQ chain corrupted."},
 694         {IOERR_ABORTMULT_REQUESTED, "Abort multiple requested."},
 695         {IOERR_BUFFER_SHORTAGE, "Buffer shortage."},
 696         {IOERR_XRIBUF_WAITING, "XRI buffer shortage"},
 697         {IOERR_XRIBUF_MISSING, "XRI buffer missing"},
 698         {IOERR_ROFFSET_INVAL, "Relative offset invalid."},
 699         {IOERR_ROFFSET_MISSING, "Relative offset missing."},
 700         {IOERR_INSUF_BUFFER, "Buffer too small."},
 701         {IOERR_MISSING_SI, "ELS frame missing SI"},
 702         {IOERR_MISSING_ES, "Exhausted burst without ES"},
 703         {IOERR_INCOMP_XFER, "Transfer incomplete."},
 704         {IOERR_ABORT_TIMEOUT, "Abort timeout."}
 705 
 706 };      /* emlxs_error_table */
 707 
 708 
 709 emlxs_table_t emlxs_state_table[] = {
 710         {IOSTAT_SUCCESS, "Success."},
 711         {IOSTAT_FCP_RSP_ERROR, "FCP response error."},
 712         {IOSTAT_REMOTE_STOP, "Remote stop."},
 713         {IOSTAT_LOCAL_REJECT, "Local reject."},
 714         {IOSTAT_NPORT_RJT, "NPort reject."},
 715         {IOSTAT_FABRIC_RJT, "Fabric reject."},
 716         {IOSTAT_NPORT_BSY, "Nport busy."},
 717         {IOSTAT_FABRIC_BSY, "Fabric busy."},
 718         {IOSTAT_INTERMED_RSP, "Intermediate response."},
 719         {IOSTAT_LS_RJT, "LS reject."},
 720         {IOSTAT_CMD_REJECT,             "Cmd reject."},
 721         {IOSTAT_FCP_TGT_LENCHK, "TGT length check."},
 722         {IOSTAT_NEED_BUFF_ENTRY, "Need buffer entry."},
 723         {IOSTAT_DATA_UNDERRUN, "Data underrun."},
 724         {IOSTAT_DATA_OVERRUN,  "Data overrun."},
 725         {IOSTAT_RSP_INVALID,  "Response Invalid."},
 726 
 727 };      /* emlxs_state_table */
 728 
 729 
 730 #ifdef MENLO_SUPPORT
 731 emlxs_table_t emlxs_menlo_cmd_table[] = {
 732         {MENLO_CMD_INITIALIZE,          "MENLO_INIT"},
 733         {MENLO_CMD_FW_DOWNLOAD,         "MENLO_FW_DOWNLOAD"},
 734         {MENLO_CMD_READ_MEMORY,         "MENLO_READ_MEM"},
 735         {MENLO_CMD_WRITE_MEMORY,        "MENLO_WRITE_MEM"},
 736         {MENLO_CMD_FTE_INSERT,          "MENLO_FTE_INSERT"},
 737         {MENLO_CMD_FTE_DELETE,          "MENLO_FTE_DELETE"},
 738 
 739         {MENLO_CMD_GET_INIT,            "MENLO_GET_INIT"},
 740         {MENLO_CMD_GET_CONFIG,          "MENLO_GET_CONFIG"},
 741         {MENLO_CMD_GET_PORT_STATS,      "MENLO_GET_PORT_STATS"},
 742         {MENLO_CMD_GET_LIF_STATS,       "MENLO_GET_LIF_STATS"},
 743         {MENLO_CMD_GET_ASIC_STATS,      "MENLO_GET_ASIC_STATS"},
 744         {MENLO_CMD_GET_LOG_CONFIG,      "MENLO_GET_LOG_CFG"},
 745         {MENLO_CMD_GET_LOG_DATA,        "MENLO_GET_LOG_DATA"},
 746         {MENLO_CMD_GET_PANIC_LOG,       "MENLO_GET_PANIC_LOG"},
 747         {MENLO_CMD_GET_LB_MODE,         "MENLO_GET_LB_MODE"},
 748 
 749         {MENLO_CMD_SET_PAUSE,           "MENLO_SET_PAUSE"},
 750         {MENLO_CMD_SET_FCOE_COS,        "MENLO_SET_FCOE_COS"},
 751         {MENLO_CMD_SET_UIF_PORT_TYPE,   "MENLO_SET_UIF_TYPE"},
 752 
 753         {MENLO_CMD_DIAGNOSTICS,         "MENLO_DIAGNOSTICS"},
 754         {MENLO_CMD_LOOPBACK,            "MENLO_LOOPBACK"},
 755 
 756         {MENLO_CMD_RESET,               "MENLO_RESET"},
 757         {MENLO_CMD_SET_MODE,            "MENLO_SET_MODE"}
 758 
 759 };      /* emlxs_menlo_cmd_table */
 760 
 761 emlxs_table_t emlxs_menlo_rsp_table[] = {
 762         {MENLO_RSP_SUCCESS,             "SUCCESS"},
 763         {MENLO_ERR_FAILED,              "FAILED"},
 764         {MENLO_ERR_INVALID_CMD,         "INVALID_CMD"},
 765         {MENLO_ERR_INVALID_CREDIT,      "INVALID_CREDIT"},
 766         {MENLO_ERR_INVALID_SIZE,        "INVALID_SIZE"},
 767         {MENLO_ERR_INVALID_ADDRESS,     "INVALID_ADDRESS"},
 768         {MENLO_ERR_INVALID_CONTEXT,     "INVALID_CONTEXT"},
 769         {MENLO_ERR_INVALID_LENGTH,      "INVALID_LENGTH"},
 770         {MENLO_ERR_INVALID_TYPE,        "INVALID_TYPE"},
 771         {MENLO_ERR_INVALID_DATA,        "INVALID_DATA"},
 772         {MENLO_ERR_INVALID_VALUE1,      "INVALID_VALUE1"},
 773         {MENLO_ERR_INVALID_VALUE2,      "INVALID_VALUE2"},
 774         {MENLO_ERR_INVALID_MASK,        "INVALID_MASK"},
 775         {MENLO_ERR_CHECKSUM,            "CHECKSUM_ERROR"},
 776         {MENLO_ERR_UNKNOWN_FCID,        "UNKNOWN_FCID"},
 777         {MENLO_ERR_UNKNOWN_WWN,         "UNKNOWN_WWN"},
 778         {MENLO_ERR_BUSY,                "BUSY"},
 779 
 780 };      /* emlxs_menlo_rsp_table */
 781 
 782 #endif /* MENLO_SUPPORT */
 783 
 784 
 785 emlxs_table_t emlxs_mscmd_table[] = {
 786         {SLI_CT_RESPONSE_FS_ACC, "CT_ACC"},
 787         {SLI_CT_RESPONSE_FS_RJT, "CT_RJT"},
 788         {MS_GTIN, "MS_GTIN"},
 789         {MS_GIEL, "MS_GIEL"},
 790         {MS_GIET, "MS_GIET"},
 791         {MS_GDID, "MS_GDID"},
 792         {MS_GMID, "MS_GMID"},
 793         {MS_GFN, "MS_GFN"},
 794         {MS_GIELN, "MS_GIELN"},
 795         {MS_GMAL, "MS_GMAL"},
 796         {MS_GIEIL, "MS_GIEIL"},
 797         {MS_GPL, "MS_GPL"},
 798         {MS_GPT, "MS_GPT"},
 799         {MS_GPPN, "MS_GPPN"},
 800         {MS_GAPNL, "MS_GAPNL"},
 801         {MS_GPS, "MS_GPS"},
 802         {MS_GPSC, "MS_GPSC"},
 803         {MS_GATIN, "MS_GATIN"},
 804         {MS_GSES, "MS_GSES"},
 805         {MS_GPLNL, "MS_GPLNL"},
 806         {MS_GPLT, "MS_GPLT"},
 807         {MS_GPLML, "MS_GPLML"},
 808         {MS_GPAB, "MS_GPAB"},
 809         {MS_GNPL, "MS_GNPL"},
 810         {MS_GPNL, "MS_GPNL"},
 811         {MS_GPFCP, "MS_GPFCP"},
 812         {MS_GPLI, "MS_GPLI"},
 813         {MS_GNID, "MS_GNID"},
 814         {MS_RIELN, "MS_RIELN"},
 815         {MS_RPL, "MS_RPL"},
 816         {MS_RPLN, "MS_RPLN"},
 817         {MS_RPLT, "MS_RPLT"},
 818         {MS_RPLM, "MS_RPLM"},
 819         {MS_RPAB, "MS_RPAB"},
 820         {MS_RPFCP, "MS_RPFCP"},
 821         {MS_RPLI, "MS_RPLI"},
 822         {MS_DPL, "MS_DPL"},
 823         {MS_DPLN, "MS_DPLN"},
 824         {MS_DPLM, "MS_DPLM"},
 825         {MS_DPLML, "MS_DPLML"},
 826         {MS_DPLI, "MS_DPLI"},
 827         {MS_DPAB, "MS_DPAB"},
 828         {MS_DPALL, "MS_DPALL"}
 829 
 830 };      /* emlxs_mscmd_table */
 831 
 832 
 833 emlxs_table_t emlxs_ctcmd_table[] = {
 834         {SLI_CT_RESPONSE_FS_ACC, "CT_ACC"},
 835         {SLI_CT_RESPONSE_FS_RJT, "CT_RJT"},
 836         {SLI_CTNS_GA_NXT, "GA_NXT"},
 837         {SLI_CTNS_GPN_ID, "GPN_ID"},
 838         {SLI_CTNS_GNN_ID, "GNN_ID"},
 839         {SLI_CTNS_GCS_ID, "GCS_ID"},
 840         {SLI_CTNS_GFT_ID, "GFT_ID"},
 841         {SLI_CTNS_GSPN_ID, "GSPN_ID"},
 842         {SLI_CTNS_GPT_ID, "GPT_ID"},
 843         {SLI_CTNS_GID_PN, "GID_PN"},
 844         {SLI_CTNS_GID_NN, "GID_NN"},
 845         {SLI_CTNS_GIP_NN, "GIP_NN"},
 846         {SLI_CTNS_GIPA_NN, "GIPA_NN"},
 847         {SLI_CTNS_GSNN_NN, "GSNN_NN"},
 848         {SLI_CTNS_GNN_IP, "GNN_IP"},
 849         {SLI_CTNS_GIPA_IP, "GIPA_IP"},
 850         {SLI_CTNS_GID_FT, "GID_FT"},
 851         {SLI_CTNS_GID_PT, "GID_PT"},
 852         {SLI_CTNS_RPN_ID, "RPN_ID"},
 853         {SLI_CTNS_RNN_ID, "RNN_ID"},
 854         {SLI_CTNS_RCS_ID, "RCS_ID"},
 855         {SLI_CTNS_RFT_ID, "RFT_ID"},
 856         {SLI_CTNS_RSPN_ID, "RSPN_ID"},
 857         {SLI_CTNS_RPT_ID, "RPT_ID"},
 858         {SLI_CTNS_RIP_NN, "RIP_NN"},
 859         {SLI_CTNS_RIPA_NN, "RIPA_NN"},
 860         {SLI_CTNS_RSNN_NN, "RSNN_NN"},
 861         {SLI_CTNS_DA_ID, "DA_ID"},
 862         {SLI_CT_LOOPBACK, "LOOPBACK"} /* Driver special */
 863 
 864 };      /* emlxs_ctcmd_table */
 865 
 866 
 867 
 868 emlxs_table_t emlxs_rmcmd_table[] = {
 869         {SLI_CT_RESPONSE_FS_ACC, "CT_ACC"},
 870         {SLI_CT_RESPONSE_FS_RJT, "CT_RJT"},
 871         {CT_OP_GSAT, "RM_GSAT"},
 872         {CT_OP_GHAT, "RM_GHAT"},
 873         {CT_OP_GPAT, "RM_GPAT"},
 874         {CT_OP_GDAT, "RM_GDAT"},
 875         {CT_OP_GPST, "RM_GPST"},
 876         {CT_OP_GDP, "RM_GDP"},
 877         {CT_OP_GDPG, "RM_GDPG"},
 878         {CT_OP_GEPS, "RM_GEPS"},
 879         {CT_OP_GLAT, "RM_GLAT"},
 880         {CT_OP_SSAT, "RM_SSAT"},
 881         {CT_OP_SHAT, "RM_SHAT"},
 882         {CT_OP_SPAT, "RM_SPAT"},
 883         {CT_OP_SDAT, "RM_SDAT"},
 884         {CT_OP_SDP, "RM_SDP"},
 885         {CT_OP_SBBS, "RM_SBBS"},
 886         {CT_OP_RPST, "RM_RPST"},
 887         {CT_OP_VFW, "RM_VFW"},
 888         {CT_OP_DFW, "RM_DFW"},
 889         {CT_OP_RES, "RM_RES"},
 890         {CT_OP_RHD, "RM_RHD"},
 891         {CT_OP_UFW, "RM_UFW"},
 892         {CT_OP_RDP, "RM_RDP"},
 893         {CT_OP_GHDR, "RM_GHDR"},
 894         {CT_OP_CHD, "RM_CHD"},
 895         {CT_OP_SSR, "RM_SSR"},
 896         {CT_OP_RSAT, "RM_RSAT"},
 897         {CT_OP_WSAT, "RM_WSAT"},
 898         {CT_OP_RSAH, "RM_RSAH"},
 899         {CT_OP_WSAH, "RM_WSAH"},
 900         {CT_OP_RACT, "RM_RACT"},
 901         {CT_OP_WACT, "RM_WACT"},
 902         {CT_OP_RKT, "RM_RKT"},
 903         {CT_OP_WKT, "RM_WKT"},
 904         {CT_OP_SSC, "RM_SSC"},
 905         {CT_OP_QHBA, "RM_QHBA"},
 906         {CT_OP_GST, "RM_GST"},
 907         {CT_OP_GFTM, "RM_GFTM"},
 908         {CT_OP_SRL, "RM_SRL"},
 909         {CT_OP_SI, "RM_SI"},
 910         {CT_OP_SRC, "RM_SRC"},
 911         {CT_OP_GPB, "RM_GPB"},
 912         {CT_OP_SPB, "RM_SPB"},
 913         {CT_OP_RPB, "RM_RPB"},
 914         {CT_OP_RAPB, "RM_RAPB"},
 915         {CT_OP_GBC, "RM_GBC"},
 916         {CT_OP_GBS, "RM_GBS"},
 917         {CT_OP_SBS, "RM_SBS"},
 918         {CT_OP_GANI, "RM_GANI"},
 919         {CT_OP_GRV, "RM_GRV"},
 920         {CT_OP_GAPBS, "RM_GAPBS"},
 921         {CT_OP_APBC, "RM_APBC"},
 922         {CT_OP_GDT, "RM_GDT"},
 923         {CT_OP_GDLMI, "RM_GDLMI"},
 924         {CT_OP_GANA, "RM_GANA"},
 925         {CT_OP_GDLV, "RM_GDLV"},
 926         {CT_OP_GWUP, "RM_GWUP"},
 927         {CT_OP_GLM, "RM_GLM"},
 928         {CT_OP_GABS, "RM_GABS"},
 929         {CT_OP_SABS, "RM_SABS"},
 930         {CT_OP_RPR, "RM_RPR"},
 931         {SLI_CT_LOOPBACK, "LOOPBACK"} /* Driver special */
 932 
 933 };      /* emlxs_rmcmd_table */
 934 
 935 
 936 emlxs_table_t emlxs_elscmd_table[] = {
 937         {ELS_CMD_ACC, "ACC"},
 938         {ELS_CMD_LS_RJT, "LS_RJT"},
 939         {ELS_CMD_PLOGI, "PLOGI"},
 940         {ELS_CMD_FLOGI, "FLOGI"},
 941         {ELS_CMD_LOGO, "LOGO"},
 942         {ELS_CMD_ABTX, "ABTX"},
 943         {ELS_CMD_RCS, "RCS"},
 944         {ELS_CMD_RES, "RES"},
 945         {ELS_CMD_RSS, "RSS"},
 946         {ELS_CMD_RSI, "RSI"},
 947         {ELS_CMD_ESTS, "ESTS"},
 948         {ELS_CMD_ESTC, "ESTC"},
 949         {ELS_CMD_ADVC, "ADVC"},
 950         {ELS_CMD_RTV, "RTV"},
 951         {ELS_CMD_RLS, "RLS"},
 952         {ELS_CMD_ECHO, "ECHO"},
 953         {ELS_CMD_TEST, "TEST"},
 954         {ELS_CMD_RRQ, "RRQ"},
 955         {ELS_CMD_REC, "REC"},
 956         {ELS_CMD_PRLI, "PRLI"},
 957         {ELS_CMD_PRLO, "PRLO"},
 958         {ELS_CMD_SCN, "SCN"},
 959         {ELS_CMD_TPLS, "TPLS"},
 960         {ELS_CMD_GPRLO, "GPRLO"},
 961         {ELS_CMD_GAID, "GAID"},
 962         {ELS_CMD_FACT, "FACT"},
 963         {ELS_CMD_FDACT, "FDACT"},
 964         {ELS_CMD_NACT, "NACT"},
 965         {ELS_CMD_NDACT, "NDACT"},
 966         {ELS_CMD_QoSR, "QoSR"},
 967         {ELS_CMD_RVCS, "RVCS"},
 968         {ELS_CMD_PDISC, "PDISC"},
 969         {ELS_CMD_FDISC, "FDISC"},
 970         {ELS_CMD_ADISC, "ADISC"},
 971         {ELS_CMD_FARP, "FARP"},
 972         {ELS_CMD_FARPR, "FARPR"},
 973         {ELS_CMD_FAN, "FAN"},
 974         {ELS_CMD_RSCN, "RSCN"},
 975         {ELS_CMD_SCR, "SCR"},
 976         {ELS_CMD_LINIT, "LINIT"},
 977         {ELS_CMD_RNID, "RNID"},
 978         {ELS_CMD_AUTH, "AUTH"}
 979 
 980 };      /* emlxs_elscmd_table */
 981 
 982 
 983 emlxs_table_t emlxs_mode_table[] = {
 984         {MODE_NONE, "NONE"},
 985         {MODE_INITIATOR, "INITIATOR"},
 986         {MODE_TARGET, "TARGET"},
 987         {MODE_ALL, "INITIATOR | TARGET"}
 988 };      /* emlxs_mode_table */
 989 
 990 /*
 991  *
 992  *      Device Driver Entry Routines
 993  *
 994  */
 995 
 996 #ifdef MODSYM_SUPPORT
 997 static void emlxs_fca_modclose();
 998 static int  emlxs_fca_modopen();
 999 emlxs_modsym_t emlxs_modsym;    /* uses emlxs_device.lock */
1000 
1001 static int
1002 emlxs_fca_modopen()
1003 {
1004         int err;
1005 
1006         if (emlxs_modsym.mod_fctl) {
1007                 return (0);
1008         }
1009 
1010         /* Leadville (fctl) */
1011         err = 0;
1012         emlxs_modsym.mod_fctl =
1013             ddi_modopen("misc/fctl", KRTLD_MODE_FIRST, &err);
1014         if (!emlxs_modsym.mod_fctl) {
1015                 cmn_err(CE_WARN,
1016                     "?%s: misc/fctl: ddi_modopen misc/fctl failed: error=%d",
1017                     DRIVER_NAME, err);
1018 
1019                 goto failed;
1020         }
1021 
1022         err = 0;
1023         /* Check if the fctl fc_fca_attach is present */
1024         emlxs_modsym.fc_fca_attach =
1025             (int (*)())ddi_modsym(emlxs_modsym.mod_fctl, "fc_fca_attach",
1026             &err);
1027         if ((void *)emlxs_modsym.fc_fca_attach == NULL) {
1028                 cmn_err(CE_WARN,
1029                     "?%s: misc/fctl: fc_fca_attach not present", DRIVER_NAME);
1030                 goto failed;
1031         }
1032 
1033         err = 0;
1034         /* Check if the fctl fc_fca_detach is present */
1035         emlxs_modsym.fc_fca_detach =
1036             (int (*)())ddi_modsym(emlxs_modsym.mod_fctl, "fc_fca_detach",
1037             &err);
1038         if ((void *)emlxs_modsym.fc_fca_detach == NULL) {
1039                 cmn_err(CE_WARN,
1040                     "?%s: misc/fctl: fc_fca_detach not present", DRIVER_NAME);
1041                 goto failed;
1042         }
1043 
1044         err = 0;
1045         /* Check if the fctl fc_fca_init is present */
1046         emlxs_modsym.fc_fca_init =
1047             (int (*)())ddi_modsym(emlxs_modsym.mod_fctl, "fc_fca_init", &err);
1048         if ((void *)emlxs_modsym.fc_fca_init == NULL) {
1049                 cmn_err(CE_WARN,
1050                     "?%s: misc/fctl: fc_fca_init not present", DRIVER_NAME);
1051                 goto failed;
1052         }
1053 
1054         return (0);
1055 
1056 failed:
1057 
1058         emlxs_fca_modclose();
1059 
1060         return (1);
1061 
1062 
1063 } /* emlxs_fca_modopen() */
1064 
1065 
1066 static void
1067 emlxs_fca_modclose()
1068 {
1069         if (emlxs_modsym.mod_fctl) {
1070                 (void) ddi_modclose(emlxs_modsym.mod_fctl);
1071                 emlxs_modsym.mod_fctl = 0;
1072         }
1073 
1074         emlxs_modsym.fc_fca_attach = NULL;
1075         emlxs_modsym.fc_fca_detach = NULL;
1076         emlxs_modsym.fc_fca_init   = NULL;
1077 
1078         return;
1079 
1080 } /* emlxs_fca_modclose() */
1081 
1082 #endif /* MODSYM_SUPPORT */
1083 
1084 
1085 
1086 /*
1087  * Global driver initialization, called once when driver is loaded
1088  */
1089 int
1090 _init(void)
1091 {
1092         int ret;
1093 
1094         /*
1095          * First init call for this driver,
1096          * so initialize the emlxs_dev_ctl structure.
1097          */
1098         bzero(&emlxs_device, sizeof (emlxs_device));
1099 
1100 #ifdef MODSYM_SUPPORT
1101         bzero(&emlxs_modsym, sizeof (emlxs_modsym_t));
1102 #endif /* MODSYM_SUPPORT */
1103 
1104         mutex_init(&emlxs_device.lock, NULL, MUTEX_DRIVER, NULL);
1105 
1106         (void) drv_getparm(LBOLT, &emlxs_device.log_timestamp);
1107         emlxs_device.drv_timestamp = ddi_get_time();
1108 
1109         for (ret = 0; ret < MAX_FC_BRDS; ret++) {
1110                 emlxs_instance[ret] = (uint32_t)-1;
1111         }
1112 
1113         /*
1114          * Provide for one ddiinst of the emlxs_dev_ctl structure
1115          * for each possible board in the system.
1116          */
1117         if ((ret = ddi_soft_state_init(&emlxs_soft_state,
1118             sizeof (emlxs_hba_t), MAX_FC_BRDS)) != 0) {
1119                 cmn_err(CE_WARN,
1120                     "?%s: _init: ddi_soft_state_init failed. rval=%x",
1121                     DRIVER_NAME, ret);
1122 
1123                 return (ret);
1124         }
1125 
1126 #ifdef MODSYM_SUPPORT
1127         /* Open SFS */
1128         (void) emlxs_fca_modopen();
1129 #endif /* MODSYM_SUPPORT */
1130 
1131         /* Setup devops for SFS */
1132         MODSYM(fc_fca_init)(&emlxs_ops);
1133 
1134         if ((ret = mod_install(&emlxs_modlinkage)) != 0) {
1135                 (void) ddi_soft_state_fini(&emlxs_soft_state);
1136 #ifdef MODSYM_SUPPORT
1137                 /* Close SFS */
1138                 emlxs_fca_modclose();
1139 #endif /* MODSYM_SUPPORT */
1140 
1141                 return (ret);
1142         }
1143 
1144 #ifdef SAN_DIAG_SUPPORT
1145         mutex_init(&emlxs_sd_bucket_mutex, NULL, MUTEX_DRIVER, NULL);
1146 #endif /* SAN_DIAG_SUPPORT */
1147 
1148         return (ret);
1149 
1150 } /* _init() */
1151 
1152 
1153 /*
1154  * Called when driver is unloaded.
1155  */
1156 int
1157 _fini(void)
1158 {
1159         int ret;
1160 
1161         if ((ret = mod_remove(&emlxs_modlinkage)) != 0) {
1162                 return (ret);
1163         }
1164 #ifdef MODSYM_SUPPORT
1165         /* Close SFS */
1166         emlxs_fca_modclose();
1167 #endif /* MODSYM_SUPPORT */
1168 
1169         /*
1170          * Destroy the soft state structure
1171          */
1172         (void) ddi_soft_state_fini(&emlxs_soft_state);
1173 
1174         /* Destroy the global device lock */
1175         mutex_destroy(&emlxs_device.lock);
1176 
1177 #ifdef SAN_DIAG_SUPPORT
1178         mutex_destroy(&emlxs_sd_bucket_mutex);
1179 #endif /* SAN_DIAG_SUPPORT */
1180 
1181         return (ret);
1182 
1183 } /* _fini() */
1184 
1185 
1186 
1187 int
1188 _info(struct modinfo *modinfop)
1189 {
1190 
1191         return (mod_info(&emlxs_modlinkage, modinfop));
1192 
1193 } /* _info() */
1194 
1195 
1196 /*
1197  * Attach an ddiinst of an emlx host adapter.
1198  * Allocate data structures, initialize the adapter and we're ready to fly.
1199  */
1200 static int
1201 emlxs_attach(dev_info_t *dip, ddi_attach_cmd_t cmd)
1202 {
1203         emlxs_hba_t *hba;
1204         int ddiinst;
1205         int emlxinst;
1206         int rval;
1207 
1208         switch (cmd) {
1209         case DDI_ATTACH:
1210                 /* If successful this will set EMLXS_PM_IN_ATTACH */
1211                 rval = emlxs_hba_attach(dip);
1212                 break;
1213 
1214         case DDI_RESUME:
1215                 /* This will resume the driver */
1216                 rval = emlxs_hba_resume(dip);
1217                 break;
1218 
1219         default:
1220                 rval = DDI_FAILURE;
1221         }
1222 
1223         if (rval == DDI_SUCCESS) {
1224                 ddiinst = ddi_get_instance(dip);
1225                 emlxinst = emlxs_get_instance(ddiinst);
1226                 hba = emlxs_device.hba[emlxinst];
1227 
1228                 if ((hba != NULL) && (hba != (emlxs_hba_t *)-1)) {
1229 
1230                         /* Enable driver dump feature */
1231                         mutex_enter(&EMLXS_PORT_LOCK);
1232                         hba->flag |= FC_DUMP_SAFE;
1233                         mutex_exit(&EMLXS_PORT_LOCK);
1234                 }
1235         }
1236 
1237         return (rval);
1238 
1239 } /* emlxs_attach() */
1240 
1241 
1242 /*
1243  * Detach/prepare driver to unload (see detach(9E)).
1244  */
1245 static int
1246 emlxs_detach(dev_info_t *dip, ddi_detach_cmd_t cmd)
1247 {
1248         emlxs_hba_t *hba;
1249         emlxs_port_t *port;
1250         int ddiinst;
1251         int emlxinst;
1252         int rval;
1253 
1254         ddiinst = ddi_get_instance(dip);
1255         emlxinst = emlxs_get_instance(ddiinst);
1256         hba = emlxs_device.hba[emlxinst];
1257 
1258         if (hba == NULL) {
1259                 cmn_err(CE_WARN, "?%s: Detach: NULL device.", DRIVER_NAME);
1260 
1261                 return (DDI_FAILURE);
1262         }
1263 
1264         if (hba == (emlxs_hba_t *)-1) {
1265                 cmn_err(CE_WARN, "?%s: Detach: Device attach failed.",
1266                     DRIVER_NAME);
1267 
1268                 return (DDI_FAILURE);
1269         }
1270 
1271         port = &PPORT;
1272         rval = DDI_SUCCESS;
1273 
1274         /* Check driver dump */
1275         mutex_enter(&EMLXS_PORT_LOCK);
1276 
1277         if (hba->flag & FC_DUMP_ACTIVE) {
1278                 mutex_exit(&EMLXS_PORT_LOCK);
1279 
1280                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_failed_msg,
1281                     "detach: Driver busy. Driver dump active.");
1282 
1283                 return (DDI_FAILURE);
1284         }
1285 
1286 #ifdef SFCT_SUPPORT
1287         if ((port->flag & EMLXS_TGT_BOUND) &&
1288             ((port->fct_flags & FCT_STATE_PORT_ONLINE) ||
1289             (port->fct_flags & FCT_STATE_NOT_ACKED))) {
1290                 mutex_exit(&EMLXS_PORT_LOCK);
1291 
1292                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_failed_msg,
1293                     "detach: Driver busy. Target mode active.");
1294 
1295                 return (DDI_FAILURE);
1296         }
1297 #endif /* SFCT_SUPPORT */
1298 
1299         if (port->flag & EMLXS_INI_BOUND) {
1300                 mutex_exit(&EMLXS_PORT_LOCK);
1301 
1302                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_failed_msg,
1303                     "detach: Driver busy. Initiator mode active.");
1304 
1305                 return (DDI_FAILURE);
1306         }
1307 
1308         hba->flag &= ~FC_DUMP_SAFE;
1309 
1310         mutex_exit(&EMLXS_PORT_LOCK);
1311 
1312         switch (cmd) {
1313         case DDI_DETACH:
1314 
1315                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_debug_msg,
1316                     "DDI_DETACH");
1317 
1318                 rval = emlxs_hba_detach(dip);
1319 
1320                 if (rval != DDI_SUCCESS) {
1321                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_failed_msg,
1322                             "Unable to detach.");
1323                 }
1324                 break;
1325 
1326         case DDI_SUSPEND:
1327 
1328                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_debug_msg,
1329                     "DDI_SUSPEND");
1330 
1331                 /* Suspend the driver */
1332                 rval = emlxs_hba_suspend(dip);
1333 
1334                 if (rval != DDI_SUCCESS) {
1335                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_failed_msg,
1336                             "Unable to suspend driver.");
1337                 }
1338                 break;
1339 
1340         default:
1341                 cmn_err(CE_WARN, "?%s: Detach: Unknown cmd received. cmd=%x",
1342                     DRIVER_NAME, cmd);
1343                 rval = DDI_FAILURE;
1344         }
1345 
1346         if (rval == DDI_FAILURE) {
1347                 /* Re-Enable driver dump feature */
1348                 mutex_enter(&EMLXS_PORT_LOCK);
1349                 hba->flag |= FC_DUMP_SAFE;
1350                 mutex_exit(&EMLXS_PORT_LOCK);
1351         }
1352 
1353         return (rval);
1354 
1355 } /* emlxs_detach() */
1356 
1357 
1358 /* EMLXS_PORT_LOCK must be held when calling this */
1359 extern void
1360 emlxs_port_init(emlxs_port_t *port)
1361 {
1362         emlxs_hba_t *hba = HBA;
1363 
1364         /* Initialize the base node */
1365         bzero((caddr_t)&port->node_base, sizeof (NODELIST));
1366         port->node_base.nlp_Rpi = 0;
1367         port->node_base.nlp_DID = 0xffffff;
1368         port->node_base.nlp_list_next = NULL;
1369         port->node_base.nlp_list_prev = NULL;
1370         port->node_base.nlp_active = 1;
1371         port->node_base.nlp_base = 1;
1372         port->node_count = 0;
1373 
1374         if (!(port->flag & EMLXS_PORT_ENABLED)) {
1375                 uint8_t dummy_wwn[8] =
1376                     { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
1377 
1378                 bcopy((caddr_t)dummy_wwn, (caddr_t)&port->wwnn,
1379                     sizeof (NAME_TYPE));
1380                 bcopy((caddr_t)dummy_wwn, (caddr_t)&port->wwpn,
1381                     sizeof (NAME_TYPE));
1382         }
1383 
1384         if (!(port->flag & EMLXS_PORT_CONFIG)) {
1385                 (void) strncpy((caddr_t)port->snn, (caddr_t)hba->snn,
1386                     (sizeof (port->snn)-1));
1387                 (void) strncpy((caddr_t)port->spn, (caddr_t)hba->spn,
1388                     (sizeof (port->spn)-1));
1389         }
1390 
1391         bcopy((caddr_t)&hba->sparam, (caddr_t)&port->sparam,
1392             sizeof (SERV_PARM));
1393         bcopy((caddr_t)&port->wwnn, (caddr_t)&port->sparam.nodeName,
1394             sizeof (NAME_TYPE));
1395         bcopy((caddr_t)&port->wwpn, (caddr_t)&port->sparam.portName,
1396             sizeof (NAME_TYPE));
1397 
1398         return;
1399 
1400 } /* emlxs_port_init() */
1401 
1402 
1403 void
1404 emlxs_disable_pcie_ce_err(emlxs_hba_t *hba)
1405 {
1406         uint16_t        reg;
1407 
1408         if (!hba->pci_cap_offset[PCI_CAP_ID_PCI_E]) {
1409                 return;
1410         }
1411 
1412         /* Turn off the Correctable Error Reporting */
1413         /* (the Device Control Register, bit 0). */
1414         reg = ddi_get16(hba->pci_acc_handle,
1415             (uint16_t *)(hba->pci_addr +
1416             hba->pci_cap_offset[PCI_CAP_ID_PCI_E] +
1417             PCIE_DEVCTL));
1418 
1419         reg &= ~1;
1420 
1421         (void) ddi_put16(hba->pci_acc_handle,
1422             (uint16_t *)(hba->pci_addr +
1423             hba->pci_cap_offset[PCI_CAP_ID_PCI_E] +
1424             PCIE_DEVCTL),
1425             reg);
1426 
1427         return;
1428 
1429 } /* emlxs_disable_pcie_ce_err() */
1430 
1431 
1432 /*
1433  * emlxs_fca_bind_port
1434  *
1435  * Arguments:
1436  *
1437  * dip: the dev_info pointer for the ddiinst
1438  * port_info: pointer to info handed back to the transport
1439  * bind_info: pointer to info from the transport
1440  *
1441  * Return values: a port handle for this port, NULL for failure
1442  *
1443  */
1444 static opaque_t
1445 emlxs_fca_bind_port(dev_info_t *dip, fc_fca_port_info_t *port_info,
1446     fc_fca_bind_info_t *bind_info)
1447 {
1448         emlxs_hba_t *hba;
1449         emlxs_port_t *port;
1450         emlxs_port_t *pport;
1451         emlxs_port_t *vport;
1452         int ddiinst;
1453         emlxs_vpd_t *vpd;
1454         emlxs_config_t *cfg;
1455         char *dptr;
1456         char buffer[16];
1457         uint32_t length;
1458         uint32_t len;
1459         char topology[32];
1460         char linkspeed[32];
1461         uint32_t linkstate;
1462 
1463         ddiinst = ddi_get_instance(dip);
1464         hba = ddi_get_soft_state(emlxs_soft_state, ddiinst);
1465         port = &PPORT;
1466         pport = &PPORT;
1467 
1468         ddiinst = hba->ddiinst;
1469         vpd = &VPD;
1470         cfg = &CFG;
1471 
1472         mutex_enter(&EMLXS_PORT_LOCK);
1473 
1474         if (bind_info->port_num > 0) {
1475 #if (EMLXS_MODREV >= EMLXS_MODREV5)
1476                 if (!(hba->flag & FC_NPIV_ENABLED) ||
1477                     !(bind_info->port_npiv) ||
1478                     (bind_info->port_num > hba->vpi_max))
1479 #elif (EMLXS_MODREV >= EMLXS_MODREV3)
1480                 if (!(hba->flag & FC_NPIV_ENABLED) ||
1481                     (bind_info->port_num > hba->vpi_high))
1482 #endif
1483                 {
1484                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
1485                             "fca_bind_port: Port %d not supported.",
1486                             bind_info->port_num);
1487 
1488                         mutex_exit(&EMLXS_PORT_LOCK);
1489 
1490                         port_info->pi_error = FC_OUTOFBOUNDS;
1491                         return (NULL);
1492                 }
1493         }
1494 
1495         /* Get true port pointer */
1496         port = &VPORT(bind_info->port_num);
1497 
1498         /* Make sure the port is not already bound to the transport */
1499         if (port->flag & EMLXS_INI_BOUND) {
1500 
1501                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
1502                     "fca_bind_port: Port %d already bound. flag=%x",
1503                     bind_info->port_num, port->flag);
1504 
1505                 mutex_exit(&EMLXS_PORT_LOCK);
1506 
1507                 port_info->pi_error = FC_ALREADY;
1508                 return (NULL);
1509         }
1510 
1511         if (!(pport->flag & EMLXS_INI_ENABLED)) {
1512                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
1513                     "fca_bind_port: Physical port does not support "
1514                     "initiator mode.");
1515 
1516                 mutex_exit(&EMLXS_PORT_LOCK);
1517 
1518                 port_info->pi_error = FC_OUTOFBOUNDS;
1519                 return (NULL);
1520         }
1521 
1522         /* Make sure port enable flag is set */
1523         /* Just in case fca_port_unbind is called just prior to fca_port_bind */
1524         /* without a driver attach or resume operation */
1525         port->flag |= EMLXS_PORT_ENABLED;
1526 
1527         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
1528             "fca_bind_port: Port %d: port_info=%p bind_info=%p",
1529             bind_info->port_num, port_info, bind_info);
1530 
1531 #if (EMLXS_MODREV >= EMLXS_MODREV5)
1532         if (bind_info->port_npiv) {
1533                 /* Leadville is telling us about a new virtual port */
1534                 bcopy((caddr_t)&bind_info->port_nwwn, (caddr_t)&port->wwnn,
1535                     sizeof (NAME_TYPE));
1536                 bcopy((caddr_t)&bind_info->port_pwwn, (caddr_t)&port->wwpn,
1537                     sizeof (NAME_TYPE));
1538                 if (port->snn[0] == 0) {
1539                         (void) strncpy((caddr_t)port->snn, (caddr_t)hba->snn,
1540                             (sizeof (port->snn)-1));
1541 
1542                 }
1543 
1544                 if (port->spn[0] == 0) {
1545                         (void) snprintf((caddr_t)port->spn,
1546                             (sizeof (port->spn)-1), "%s VPort-%d",
1547                             (caddr_t)hba->spn, port->vpi);
1548                 }
1549                 port->flag |= EMLXS_PORT_CONFIG;
1550         }
1551 #endif /* >= EMLXS_MODREV5 */
1552 
1553         /*
1554          * Restricted login should apply both physical and
1555          * virtual ports.
1556          */
1557         if (cfg[CFG_VPORT_RESTRICTED].current) {
1558                 port->flag |= EMLXS_PORT_RESTRICTED;
1559         }
1560 
1561         /* Perform generic port initialization */
1562         emlxs_port_init(port);
1563 
1564         /* Perform SFS specific initialization */
1565         port->ulp_handle     = bind_info->port_handle;
1566         port->ulp_statec_cb  = bind_info->port_statec_cb;
1567         port->ulp_unsol_cb   = bind_info->port_unsol_cb;
1568 
1569         /* Set the bound flag */
1570         port->flag |= EMLXS_INI_BOUND;
1571         hba->num_of_ports++;
1572 
1573         if (hba->sli_mode == EMLXS_HBA_SLI4_MODE) {
1574                 mutex_exit(&EMLXS_PORT_LOCK);
1575                 (void) emlxs_vpi_port_bind_notify(port);
1576                 mutex_enter(&EMLXS_PORT_LOCK);
1577 
1578                 linkstate = (port->vpip->state == VPI_STATE_PORT_ONLINE)?
1579                     FC_LINK_UP:FC_LINK_DOWN;
1580         } else {
1581                 linkstate = hba->state;
1582         }
1583 
1584         /* Update the port info structure */
1585 
1586         /* Set the topology and state */
1587         if (port->mode == MODE_TARGET) {
1588                 port_info->pi_port_state = FC_STATE_OFFLINE;
1589                 port_info->pi_topology = FC_TOP_UNKNOWN;
1590         } else if ((linkstate < FC_LINK_UP) ||
1591             ((port->vpi > 0) && (!(port->flag & EMLXS_PORT_ENABLED) ||
1592             !(hba->flag & FC_NPIV_SUPPORTED)))) {
1593                 port_info->pi_port_state = FC_STATE_OFFLINE;
1594                 port_info->pi_topology = FC_TOP_UNKNOWN;
1595         }
1596 #ifdef MENLO_SUPPORT
1597         else if (hba->flag & FC_MENLO_MODE) {
1598                 port_info->pi_port_state = FC_STATE_OFFLINE;
1599                 port_info->pi_topology = FC_TOP_UNKNOWN;
1600         }
1601 #endif /* MENLO_SUPPORT */
1602         else {
1603                 /* Check for loop topology */
1604                 if (hba->topology == TOPOLOGY_LOOP) {
1605                         port_info->pi_port_state = FC_STATE_LOOP;
1606                         (void) strlcpy(topology, ", loop", sizeof (topology));
1607 
1608                         if (hba->flag & FC_FABRIC_ATTACHED) {
1609                                 port_info->pi_topology = FC_TOP_PUBLIC_LOOP;
1610                         } else {
1611                                 port_info->pi_topology = FC_TOP_PRIVATE_LOOP;
1612                         }
1613                 } else {
1614                         port_info->pi_topology = FC_TOP_FABRIC;
1615                         port_info->pi_port_state = FC_STATE_ONLINE;
1616                         (void) strlcpy(topology, ", fabric", sizeof (topology));
1617                 }
1618 
1619                 /* Set the link speed */
1620                 switch (hba->linkspeed) {
1621                 case 0:
1622                         (void) strlcpy(linkspeed, "Gb", sizeof (linkspeed));
1623                         port_info->pi_port_state |= FC_STATE_1GBIT_SPEED;
1624                         break;
1625 
1626                 case LA_1GHZ_LINK:
1627                         (void) strlcpy(linkspeed, "1Gb", sizeof (linkspeed));
1628                         port_info->pi_port_state |= FC_STATE_1GBIT_SPEED;
1629                         break;
1630                 case LA_2GHZ_LINK:
1631                         (void) strlcpy(linkspeed, "2Gb", sizeof (linkspeed));
1632                         port_info->pi_port_state |= FC_STATE_2GBIT_SPEED;
1633                         break;
1634                 case LA_4GHZ_LINK:
1635                         (void) strlcpy(linkspeed, "4Gb", sizeof (linkspeed));
1636                         port_info->pi_port_state |= FC_STATE_4GBIT_SPEED;
1637                         break;
1638                 case LA_8GHZ_LINK:
1639                         (void) strlcpy(linkspeed, "8Gb", sizeof (linkspeed));
1640                         port_info->pi_port_state |= FC_STATE_8GBIT_SPEED;
1641                         break;
1642                 case LA_10GHZ_LINK:
1643                         (void) strlcpy(linkspeed, "10Gb", sizeof (linkspeed));
1644                         port_info->pi_port_state |= FC_STATE_10GBIT_SPEED;
1645                         break;
1646                 case LA_16GHZ_LINK:
1647                         (void) strlcpy(linkspeed, "16Gb", sizeof (linkspeed));
1648                         port_info->pi_port_state |= FC_STATE_16GBIT_SPEED;
1649                         break;
1650                 default:
1651                         (void) snprintf(linkspeed, sizeof (linkspeed),
1652                             "unknown(0x%x)", hba->linkspeed);
1653                         break;
1654                 }
1655 
1656                 if (hba->sli_mode <= EMLXS_HBA_SLI3_MODE) {
1657                         /* Adjusting port context for link up messages */
1658                         vport = port;
1659                         port = &PPORT;
1660                         if (vport->vpi == 0) {
1661                                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_link_up_msg,
1662                                     "%s%s, initiator",
1663                                     linkspeed, topology);
1664                         } else if (!(hba->flag & FC_NPIV_LINKUP)) {
1665                                 hba->flag |= FC_NPIV_LINKUP;
1666                                 EMLXS_MSGF(EMLXS_CONTEXT,
1667                                     &emlxs_npiv_link_up_msg,
1668                                     "%s%s, initiator", linkspeed, topology);
1669                         }
1670                         port = vport;
1671                 }
1672         }
1673 
1674         /* PCIE Correctable Error Reporting workaround */
1675         if (((hba->model_info.chip == EMLXS_BE2_CHIP) ||
1676             (hba->model_info.chip == EMLXS_BE3_CHIP)) &&
1677             (bind_info->port_num == 0)) {
1678                 emlxs_disable_pcie_ce_err(hba);
1679         }
1680 
1681         /* Save initial state */
1682         port->ulp_statec = port_info->pi_port_state;
1683 
1684         /*
1685          * The transport needs a copy of the common service parameters
1686          * for this port. The transport can get any updates through
1687          * the getcap entry point.
1688          */
1689         bcopy((void *) &port->sparam,
1690             (void *) &port_info->pi_login_params.common_service,
1691             sizeof (SERV_PARM));
1692 
1693 #if (EMLXS_MODREVX == EMLXS_MODREV2X)
1694         /* Swap the service parameters for ULP */
1695         emlxs_swap_service_params((SERV_PARM *)&port_info->pi_login_params.
1696             common_service);
1697 #endif /* EMLXS_MODREV2X */
1698 
1699         port_info->pi_login_params.common_service.btob_credit = 0xffff;
1700 
1701         bcopy((void *) &port->wwnn,
1702             (void *) &port_info->pi_login_params.node_ww_name,
1703             sizeof (NAME_TYPE));
1704 
1705         bcopy((void *) &port->wwpn,
1706             (void *) &port_info->pi_login_params.nport_ww_name,
1707             sizeof (NAME_TYPE));
1708 
1709         /*
1710          * We need to turn off CLASS2 support.
1711          * Otherwise, FC transport will use CLASS2 as default class
1712          * and never try with CLASS3.
1713          */
1714 #if (EMLXS_MODREV >= EMLXS_MODREV3)
1715 #if (EMLXS_MODREVX >= EMLXS_MODREV3X)
1716         if ((port_info->pi_login_params.class_1.class_opt) & 0x0080) {
1717                 port_info->pi_login_params.class_1.class_opt &= ~0x0080;
1718         }
1719 
1720         if ((port_info->pi_login_params.class_2.class_opt) & 0x0080) {
1721                 port_info->pi_login_params.class_2.class_opt &= ~0x0080;
1722         }
1723 #else   /* EMLXS_SPARC or EMLXS_MODREV2X */
1724         if ((port_info->pi_login_params.class_1.class_opt) & 0x8000) {
1725                 port_info->pi_login_params.class_1.class_opt &= ~0x8000;
1726         }
1727 
1728         if ((port_info->pi_login_params.class_2.class_opt) & 0x8000) {
1729                 port_info->pi_login_params.class_2.class_opt &= ~0x8000;
1730         }
1731 #endif  /* >= EMLXS_MODREV3X */
1732 #endif  /* >= EMLXS_MODREV3 */
1733 
1734 
1735 #if (EMLXS_MODREV <= EMLXS_MODREV2)
1736         if ((port_info->pi_login_params.class_1.data[0]) & 0x80) {
1737                 port_info->pi_login_params.class_1.data[0] &= ~0x80;
1738         }
1739 
1740         if ((port_info->pi_login_params.class_2.data[0]) & 0x80) {
1741                 port_info->pi_login_params.class_2.data[0] &= ~0x80;
1742         }
1743 #endif  /* <= EMLXS_MODREV2 */
1744 
1745         /* Additional parameters */
1746         port_info->pi_s_id.port_id = port->did;
1747         port_info->pi_s_id.priv_lilp_posit = 0;
1748         port_info->pi_hard_addr.hard_addr = cfg[CFG_ASSIGN_ALPA].current;
1749 
1750         /* Initialize the RNID parameters */
1751         bzero(&port_info->pi_rnid_params, sizeof (port_info->pi_rnid_params));
1752 
1753         (void) snprintf((char *)port_info->pi_rnid_params.params.global_id,
1754             (sizeof (port_info->pi_rnid_params.params.global_id)-1),
1755             "%01x%01x%02x%02x%02x%02x%02x%02x%02x", hba->wwpn.nameType,
1756             hba->wwpn.IEEEextMsn, hba->wwpn.IEEEextLsb, hba->wwpn.IEEE[0],
1757             hba->wwpn.IEEE[1], hba->wwpn.IEEE[2], hba->wwpn.IEEE[3],
1758             hba->wwpn.IEEE[4], hba->wwpn.IEEE[5]);
1759 
1760         port_info->pi_rnid_params.params.unit_type  = RNID_HBA;
1761         port_info->pi_rnid_params.params.port_id    = port->did;
1762         port_info->pi_rnid_params.params.ip_version = RNID_IPV4;
1763 
1764         /* Initialize the port attributes */
1765         bzero(&port_info->pi_attrs, sizeof (port_info->pi_attrs));
1766 
1767         (void) strncpy(port_info->pi_attrs.manufacturer, "Emulex",
1768             (sizeof (port_info->pi_attrs.manufacturer)-1));
1769 
1770         port_info->pi_rnid_params.status = FC_SUCCESS;
1771 
1772         (void) strncpy(port_info->pi_attrs.serial_number, vpd->serial_num,
1773             (sizeof (port_info->pi_attrs.serial_number)-1));
1774 
1775         (void) snprintf(port_info->pi_attrs.firmware_version,
1776             (sizeof (port_info->pi_attrs.firmware_version)-1), "%s (%s)",
1777             vpd->fw_version, vpd->fw_label);
1778 
1779 #ifdef EMLXS_I386
1780         (void) snprintf(port_info->pi_attrs.option_rom_version,
1781             (sizeof (port_info->pi_attrs.option_rom_version)-1),
1782             "Boot:%s", vpd->boot_version);
1783 #else   /* EMLXS_SPARC */
1784         (void) snprintf(port_info->pi_attrs.option_rom_version,
1785             (sizeof (port_info->pi_attrs.option_rom_version)-1),
1786             "Boot:%s Fcode:%s", vpd->boot_version, vpd->fcode_version);
1787 #endif  /* EMLXS_I386 */
1788 
1789         (void) snprintf(port_info->pi_attrs.driver_version,
1790             (sizeof (port_info->pi_attrs.driver_version)-1), "%s (%s)",
1791             emlxs_version, emlxs_revision);
1792 
1793         (void) strncpy(port_info->pi_attrs.driver_name, DRIVER_NAME,
1794             (sizeof (port_info->pi_attrs.driver_name)-1));
1795 
1796         port_info->pi_attrs.vendor_specific_id =
1797             ((hba->model_info.device_id << 16) | PCI_VENDOR_ID_EMULEX);
1798 
1799         port_info->pi_attrs.supported_cos = LE_SWAP32(FC_NS_CLASS3);
1800 
1801         port_info->pi_attrs.max_frame_size = FF_FRAME_SIZE;
1802 
1803 #if (EMLXS_MODREV >= EMLXS_MODREV3)
1804         port_info->pi_rnid_params.params.num_attached = 0;
1805 
1806         if (hba->model_info.chip == EMLXS_LANCER_CHIP) {
1807                 uint8_t         byte;
1808                 uint8_t         *wwpn;
1809                 uint32_t        i;
1810                 uint32_t        j;
1811 
1812                 /* Copy the WWPN as a string into the local buffer */
1813                 wwpn = (uint8_t *)&hba->wwpn;
1814                 for (i = 0; i < 16; i++) {
1815                         byte = *wwpn++;
1816                         j = ((byte & 0xf0) >> 4);
1817                         if (j <= 9) {
1818                                 buffer[i] =
1819                                     (char)((uint8_t)'0' + (uint8_t)j);
1820                         } else {
1821                                 buffer[i] =
1822                                     (char)((uint8_t)'A' + (uint8_t)(j -
1823                                     10));
1824                         }
1825 
1826                         i++;
1827                         j = (byte & 0xf);
1828                         if (j <= 9) {
1829                                 buffer[i] =
1830                                     (char)((uint8_t)'0' + (uint8_t)j);
1831                         } else {
1832                                 buffer[i] =
1833                                     (char)((uint8_t)'A' + (uint8_t)(j -
1834                                     10));
1835                         }
1836                 }
1837 
1838                 port_info->pi_attrs.hba_fru_details.port_index = 0;
1839 #if ((EMLXS_MODREV == EMLXS_MODREV3) || (EMLXS_MODREV == EMLXS_MODREV4))
1840 
1841         } else if (hba->flag & FC_NPIV_ENABLED) {
1842                 uint8_t         byte;
1843                 uint8_t         *wwpn;
1844                 uint32_t        i;
1845                 uint32_t        j;
1846 
1847                 /* Copy the WWPN as a string into the local buffer */
1848                 wwpn = (uint8_t *)&hba->wwpn;
1849                 for (i = 0; i < 16; i++) {
1850                         byte = *wwpn++;
1851                         j = ((byte & 0xf0) >> 4);
1852                         if (j <= 9) {
1853                                 buffer[i] =
1854                                     (char)((uint8_t)'0' + (uint8_t)j);
1855                         } else {
1856                                 buffer[i] =
1857                                     (char)((uint8_t)'A' + (uint8_t)(j -
1858                                     10));
1859                         }
1860 
1861                         i++;
1862                         j = (byte & 0xf);
1863                         if (j <= 9) {
1864                                 buffer[i] =
1865                                     (char)((uint8_t)'0' + (uint8_t)j);
1866                         } else {
1867                                 buffer[i] =
1868                                     (char)((uint8_t)'A' + (uint8_t)(j -
1869                                     10));
1870                         }
1871                 }
1872 
1873                 port_info->pi_attrs.hba_fru_details.port_index = port->vpi;
1874 #endif /* == EMLXS_MODREV3 || EMLXS_MODREV4 */
1875 
1876         } else {
1877                 /* Copy the serial number string (right most 16 chars) */
1878                 /* into the right justified local buffer */
1879                 bzero(buffer, sizeof (buffer));
1880                 length = strlen(vpd->serial_num);
1881                 len = (length > 16) ? 16 : length;
1882                 bcopy(&vpd->serial_num[(length - len)],
1883                     &buffer[(sizeof (buffer) - len)], len);
1884 
1885                 port_info->pi_attrs.hba_fru_details.port_index =
1886                     vpd->port_index;
1887         }
1888 
1889         dptr = (char *)&port_info->pi_attrs.hba_fru_details.high;
1890         dptr[0] = buffer[0];
1891         dptr[1] = buffer[1];
1892         dptr[2] = buffer[2];
1893         dptr[3] = buffer[3];
1894         dptr[4] = buffer[4];
1895         dptr[5] = buffer[5];
1896         dptr[6] = buffer[6];
1897         dptr[7] = buffer[7];
1898         port_info->pi_attrs.hba_fru_details.high =
1899             LE_SWAP64(port_info->pi_attrs.hba_fru_details.high);
1900 
1901         dptr = (char *)&port_info->pi_attrs.hba_fru_details.low;
1902         dptr[0] = buffer[8];
1903         dptr[1] = buffer[9];
1904         dptr[2] = buffer[10];
1905         dptr[3] = buffer[11];
1906         dptr[4] = buffer[12];
1907         dptr[5] = buffer[13];
1908         dptr[6] = buffer[14];
1909         dptr[7] = buffer[15];
1910         port_info->pi_attrs.hba_fru_details.low =
1911             LE_SWAP64(port_info->pi_attrs.hba_fru_details.low);
1912 
1913 #endif /* >= EMLXS_MODREV3 */
1914 
1915 #if (EMLXS_MODREV >= EMLXS_MODREV4)
1916         (void) strncpy((caddr_t)port_info->pi_attrs.sym_node_name,
1917             (caddr_t)port->snn, FCHBA_SYMB_NAME_LEN);
1918         (void) strncpy((caddr_t)port_info->pi_attrs.sym_port_name,
1919             (caddr_t)port->spn, FCHBA_SYMB_NAME_LEN);
1920 #endif  /* >= EMLXS_MODREV4 */
1921 
1922         (void) snprintf(port_info->pi_attrs.hardware_version,
1923             (sizeof (port_info->pi_attrs.hardware_version)-1),
1924             "%x", vpd->biuRev);
1925 
1926         /* Set the hba speed limit */
1927         if (vpd->link_speed & LMT_16GB_CAPABLE) {
1928                 port_info->pi_attrs.supported_speed |=
1929                     FC_HBA_PORTSPEED_16GBIT;
1930         }
1931         if (vpd->link_speed & LMT_10GB_CAPABLE) {
1932                 port_info->pi_attrs.supported_speed |=
1933                     FC_HBA_PORTSPEED_10GBIT;
1934         }
1935         if (vpd->link_speed & LMT_8GB_CAPABLE) {
1936                 port_info->pi_attrs.supported_speed |= FC_HBA_PORTSPEED_8GBIT;
1937         }
1938         if (vpd->link_speed & LMT_4GB_CAPABLE) {
1939                 port_info->pi_attrs.supported_speed |= FC_HBA_PORTSPEED_4GBIT;
1940         }
1941         if (vpd->link_speed & LMT_2GB_CAPABLE) {
1942                 port_info->pi_attrs.supported_speed |= FC_HBA_PORTSPEED_2GBIT;
1943         }
1944         if (vpd->link_speed & LMT_1GB_CAPABLE) {
1945                 port_info->pi_attrs.supported_speed |= FC_HBA_PORTSPEED_1GBIT;
1946         }
1947 
1948         /* Set the hba model info */
1949         (void) strncpy(port_info->pi_attrs.model, hba->model_info.model,
1950             (sizeof (port_info->pi_attrs.model)-1));
1951         (void) strncpy(port_info->pi_attrs.model_description,
1952             hba->model_info.model_desc,
1953             (sizeof (port_info->pi_attrs.model_description)-1));
1954 
1955 
1956         /* Log information */
1957         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
1958             "Bind info: port_num           = %d", bind_info->port_num);
1959         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
1960             "Bind info: port_handle        = %p", bind_info->port_handle);
1961 
1962 #if (EMLXS_MODREV >= EMLXS_MODREV5)
1963         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
1964             "Bind info: port_npiv          = %d", bind_info->port_npiv);
1965 #endif /* >= EMLXS_MODREV5 */
1966 
1967         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
1968             "Port info: pi_topology        = %x", port_info->pi_topology);
1969         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
1970             "Port info: pi_error           = %x", port_info->pi_error);
1971         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
1972             "Port info: pi_port_state      = %x", port_info->pi_port_state);
1973 
1974         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
1975             "Port info: port_id            = %x", port_info->pi_s_id.port_id);
1976         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
1977             "Port info: priv_lilp_posit    = %x",
1978             port_info->pi_s_id.priv_lilp_posit);
1979 
1980         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
1981             "Port info: hard_addr          = %x",
1982             port_info->pi_hard_addr.hard_addr);
1983 
1984         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
1985             "Port info: rnid.status        = %x",
1986             port_info->pi_rnid_params.status);
1987         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
1988             "Port info: rnid.global_id     = %16s",
1989             port_info->pi_rnid_params.params.global_id);
1990         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
1991             "Port info: rnid.unit_type     = %x",
1992             port_info->pi_rnid_params.params.unit_type);
1993         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
1994             "Port info: rnid.port_id       = %x",
1995             port_info->pi_rnid_params.params.port_id);
1996         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
1997             "Port info: rnid.num_attached  = %x",
1998             port_info->pi_rnid_params.params.num_attached);
1999         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2000             "Port info: rnid.ip_version    = %x",
2001             port_info->pi_rnid_params.params.ip_version);
2002         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2003             "Port info: rnid.udp_port      = %x",
2004             port_info->pi_rnid_params.params.udp_port);
2005         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2006             "Port info: rnid.ip_addr       = %16s",
2007             port_info->pi_rnid_params.params.ip_addr);
2008         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2009             "Port info: rnid.spec_id_resv  = %x",
2010             port_info->pi_rnid_params.params.specific_id_resv);
2011         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2012             "Port info: rnid.topo_flags    = %x",
2013             port_info->pi_rnid_params.params.topo_flags);
2014 
2015         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2016             "Port info: manufacturer       = %s",
2017             port_info->pi_attrs.manufacturer);
2018         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2019             "Port info: serial_num         = %s",
2020             port_info->pi_attrs.serial_number);
2021         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2022             "Port info: model              = %s", port_info->pi_attrs.model);
2023         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2024             "Port info: model_description  = %s",
2025             port_info->pi_attrs.model_description);
2026         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2027             "Port info: hardware_version   = %s",
2028             port_info->pi_attrs.hardware_version);
2029         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2030             "Port info: driver_version     = %s",
2031             port_info->pi_attrs.driver_version);
2032         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2033             "Port info: option_rom_version = %s",
2034             port_info->pi_attrs.option_rom_version);
2035         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2036             "Port info: firmware_version   = %s",
2037             port_info->pi_attrs.firmware_version);
2038         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2039             "Port info: driver_name        = %s",
2040             port_info->pi_attrs.driver_name);
2041         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2042             "Port info: vendor_specific_id = %x",
2043             port_info->pi_attrs.vendor_specific_id);
2044         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2045             "Port info: supported_cos      = %x",
2046             port_info->pi_attrs.supported_cos);
2047         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2048             "Port info: supported_speed    = %x",
2049             port_info->pi_attrs.supported_speed);
2050         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2051             "Port info: max_frame_size     = %x",
2052             port_info->pi_attrs.max_frame_size);
2053 
2054 #if (EMLXS_MODREV >= EMLXS_MODREV3)
2055         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2056             "Port info: fru_port_index     = %x",
2057             port_info->pi_attrs.hba_fru_details.port_index);
2058         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2059             "Port info: fru_high           = %llx",
2060             port_info->pi_attrs.hba_fru_details.high);
2061         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2062             "Port info: fru_low            = %llx",
2063             port_info->pi_attrs.hba_fru_details.low);
2064 #endif  /* >= EMLXS_MODREV3 */
2065 
2066 #if (EMLXS_MODREV >= EMLXS_MODREV4)
2067         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2068             "Port info: sym_node_name      = %s",
2069             port_info->pi_attrs.sym_node_name);
2070         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
2071             "Port info: sym_port_name      = %s",
2072             port_info->pi_attrs.sym_port_name);
2073 #endif  /* >= EMLXS_MODREV4 */
2074 
2075         mutex_exit(&EMLXS_PORT_LOCK);
2076 
2077 #ifdef SFCT_SUPPORT
2078         if (port->flag & EMLXS_TGT_ENABLED) {
2079                 emlxs_fct_bind_port(port);
2080         }
2081 #endif /* SFCT_SUPPORT */
2082 
2083         return ((opaque_t)port);
2084 
2085 } /* emlxs_fca_bind_port() */
2086 
2087 
2088 static void
2089 emlxs_fca_unbind_port(opaque_t fca_port_handle)
2090 {
2091         emlxs_port_t *port = (emlxs_port_t *)fca_port_handle;
2092         emlxs_hba_t *hba = HBA;
2093 
2094         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
2095             "fca_unbind_port: port=%p", port);
2096 
2097         if (!(port->flag & EMLXS_PORT_BOUND)) {
2098                 return;
2099         }
2100 
2101         if (hba->sli_mode == EMLXS_HBA_SLI4_MODE) {
2102                 (void) emlxs_vpi_port_unbind_notify(port, 1);
2103         }
2104 
2105         /* Destroy & flush all port nodes, if they exist */
2106         if (port->node_count) {
2107                 (void) EMLXS_SLI_UNREG_NODE(port, 0, 0, 0, 0);
2108         }
2109 
2110 #if (EMLXS_MODREV >= EMLXS_MODREV5)
2111         if ((hba->sli_mode <= EMLXS_HBA_SLI3_MODE) &&
2112             (hba->flag & FC_NPIV_ENABLED) &&
2113             (port->flag & (EMLXS_PORT_CONFIG | EMLXS_PORT_ENABLED))) {
2114                 (void) emlxs_mb_unreg_vpi(port);
2115         }
2116 #endif
2117 
2118         mutex_enter(&EMLXS_PORT_LOCK);
2119         if (port->flag & EMLXS_INI_BOUND) {
2120 #if (EMLXS_MODREV >= EMLXS_MODREV5)
2121                 port->flag &= ~(EMLXS_PORT_CONFIG | EMLXS_PORT_ENABLED);
2122 #endif
2123                 port->flag &= ~EMLXS_INI_BOUND;
2124                 hba->num_of_ports--;
2125 
2126                 /* Wait until ulp callback interface is idle */
2127                 while (port->ulp_busy) {
2128                         mutex_exit(&EMLXS_PORT_LOCK);
2129                         delay(drv_usectohz(500000));
2130                         mutex_enter(&EMLXS_PORT_LOCK);
2131                 }
2132 
2133                 port->ulp_handle = 0;
2134                 port->ulp_statec = FC_STATE_OFFLINE;
2135                 port->ulp_statec_cb = NULL;
2136                 port->ulp_unsol_cb = NULL;
2137         }
2138         mutex_exit(&EMLXS_PORT_LOCK);
2139 
2140 #ifdef SFCT_SUPPORT
2141         /* Check if port was target bound */
2142         if (port->flag & EMLXS_TGT_BOUND) {
2143                 emlxs_fct_unbind_port(port);
2144         }
2145 #endif /* SFCT_SUPPORT */
2146 
2147         return;
2148 
2149 } /* emlxs_fca_unbind_port() */
2150 
2151 
2152 /*ARGSUSED*/
2153 extern int
2154 emlxs_fca_pkt_init(opaque_t fca_port_handle, fc_packet_t *pkt, int32_t sleep)
2155 {
2156         emlxs_port_t *port = (emlxs_port_t *)fca_port_handle;
2157         emlxs_hba_t  *hba = HBA;
2158         emlxs_buf_t  *sbp = (emlxs_buf_t *)pkt->pkt_fca_private;
2159 
2160         if (!sbp) {
2161                 return (FC_FAILURE);
2162         }
2163         bzero((void *)sbp, sizeof (emlxs_buf_t));
2164 
2165         mutex_init(&sbp->mtx, NULL, MUTEX_DRIVER, DDI_INTR_PRI(hba->intr_arg));
2166         sbp->pkt_flags =
2167             PACKET_VALID | PACKET_ULP_OWNED;
2168         sbp->port = port;
2169         sbp->pkt = pkt;
2170         sbp->iocbq.sbp = sbp;
2171 
2172         return (FC_SUCCESS);
2173 
2174 } /* emlxs_fca_pkt_init() */
2175 
2176 
2177 
2178 static void
2179 emlxs_initialize_pkt(emlxs_port_t *port, emlxs_buf_t *sbp)
2180 {
2181         emlxs_hba_t *hba = HBA;
2182         emlxs_config_t *cfg = &CFG;
2183         fc_packet_t *pkt = PRIV2PKT(sbp);
2184 
2185         mutex_enter(&sbp->mtx);
2186 
2187         /* Reinitialize */
2188         sbp->pkt   = pkt;
2189         sbp->port  = port;
2190         sbp->bmp   = NULL;
2191         sbp->pkt_flags &= (PACKET_VALID | PACKET_ALLOCATED);
2192         sbp->iotag = 0;
2193         sbp->ticks = 0;
2194         sbp->abort_attempts = 0;
2195         sbp->fpkt  = NULL;
2196         sbp->flush_count = 0;
2197         sbp->next  = NULL;
2198 
2199         if (port->mode == MODE_INITIATOR) {
2200                 sbp->node  = NULL;
2201                 sbp->did   = 0;
2202                 sbp->lun   = EMLXS_LUN_NONE;
2203                 sbp->class = 0;
2204                 sbp->channel  = NULL;
2205         }
2206 
2207         bzero((void *)&sbp->iocbq, sizeof (IOCBQ));
2208         sbp->iocbq.sbp = sbp;
2209 
2210         if ((pkt->pkt_tran_flags & FC_TRAN_NO_INTR) || !pkt->pkt_comp ||
2211             ddi_in_panic()) {
2212                 sbp->pkt_flags |= PACKET_POLLED;
2213         }
2214 
2215         /* Prepare the fc packet */
2216         pkt->pkt_state = FC_PKT_SUCCESS;
2217         pkt->pkt_reason = 0;
2218         pkt->pkt_action = 0;
2219         pkt->pkt_expln = 0;
2220         pkt->pkt_data_resid = 0;
2221         pkt->pkt_resp_resid = 0;
2222 
2223         /* Make sure all pkt's have a proper timeout */
2224         if (!cfg[CFG_TIMEOUT_ENABLE].current) {
2225                 /* This disables all IOCB on chip timeouts */
2226                 pkt->pkt_timeout = 0x80000000;
2227         } else if (pkt->pkt_timeout == 0 || pkt->pkt_timeout == 0xffffffff) {
2228                 pkt->pkt_timeout = 60;
2229         }
2230 
2231         /* Clear the response buffer */
2232         if (pkt->pkt_rsplen) {
2233                 bzero(pkt->pkt_resp, pkt->pkt_rsplen);
2234         }
2235 
2236         mutex_exit(&sbp->mtx);
2237 
2238         return;
2239 
2240 } /* emlxs_initialize_pkt() */
2241 
2242 
2243 
2244 /*
2245  * We may not need this routine
2246  */
2247 /*ARGSUSED*/
2248 extern int
2249 emlxs_fca_pkt_uninit(opaque_t fca_port_handle, fc_packet_t *pkt)
2250 {
2251         emlxs_buf_t  *sbp = PKT2PRIV(pkt);
2252 
2253         if (!sbp) {
2254                 return (FC_FAILURE);
2255         }
2256 
2257         if (!(sbp->pkt_flags & PACKET_VALID)) {
2258                 return (FC_FAILURE);
2259         }
2260         sbp->pkt_flags &= ~PACKET_VALID;
2261         mutex_destroy(&sbp->mtx);
2262 
2263         return (FC_SUCCESS);
2264 
2265 } /* emlxs_fca_pkt_uninit() */
2266 
2267 
2268 static int
2269 emlxs_fca_get_cap(opaque_t fca_port_handle, char *cap, void *ptr)
2270 {
2271         emlxs_port_t *port = (emlxs_port_t *)fca_port_handle;
2272         emlxs_hba_t  *hba = HBA;
2273         int32_t rval;
2274         emlxs_config_t *cfg = &CFG;
2275 
2276         if (!(port->flag & EMLXS_INI_BOUND)) {
2277                 return (FC_CAP_ERROR);
2278         }
2279 
2280         if (strcmp(cap, FC_NODE_WWN) == 0) {
2281                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
2282                     "fca_get_cap: FC_NODE_WWN");
2283 
2284                 bcopy((void *)&hba->wwnn, (void *)ptr, sizeof (NAME_TYPE));
2285                 rval = FC_CAP_FOUND;
2286 
2287         } else if (strcmp(cap, FC_LOGIN_PARAMS) == 0) {
2288                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
2289                     "fca_get_cap: FC_LOGIN_PARAMS");
2290 
2291                 /*
2292                  * We need to turn off CLASS2 support.
2293                  * Otherwise, FC transport will use CLASS2 as default class
2294                  * and never try with CLASS3.
2295                  */
2296                 hba->sparam.cls2.classValid = 0;
2297 
2298                 bcopy((void *)&hba->sparam, (void *)ptr, sizeof (SERV_PARM));
2299 
2300                 rval = FC_CAP_FOUND;
2301 
2302         } else if (strcmp(cap, FC_CAP_UNSOL_BUF) == 0) {
2303                 int32_t         *num_bufs;
2304 
2305                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
2306                     "fca_get_cap: FC_CAP_UNSOL_BUF (%d)",
2307                     cfg[CFG_UB_BUFS].current);
2308 
2309                 num_bufs = (int32_t *)ptr;
2310 
2311                 /* We multiply by MAX_VPORTS because ULP uses a */
2312                 /* formula to calculate ub bufs from this */
2313                 *num_bufs = (cfg[CFG_UB_BUFS].current * MAX_VPORTS);
2314 
2315                 rval = FC_CAP_FOUND;
2316 
2317         } else if (strcmp(cap, FC_CAP_PAYLOAD_SIZE) == 0) {
2318                 int32_t         *size;
2319 
2320                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
2321                     "fca_get_cap: FC_CAP_PAYLOAD_SIZE");
2322 
2323                 size = (int32_t *)ptr;
2324                 *size = -1;
2325                 rval = FC_CAP_FOUND;
2326 
2327         } else if (strcmp(cap, FC_CAP_POST_RESET_BEHAVIOR) == 0) {
2328                 fc_reset_action_t *action;
2329 
2330                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
2331                     "fca_get_cap: FC_CAP_POST_RESET_BEHAVIOR");
2332 
2333                 action = (fc_reset_action_t *)ptr;
2334                 *action = FC_RESET_RETURN_ALL;
2335                 rval = FC_CAP_FOUND;
2336 
2337         } else if (strcmp(cap, FC_CAP_NOSTREAM_ON_UNALIGN_BUF) == 0) {
2338                 fc_dma_behavior_t *behavior;
2339 
2340                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
2341                     "fca_get_cap: FC_CAP_NOSTREAM_ON_UNALIGN_BUF");
2342 
2343                 behavior = (fc_dma_behavior_t *)ptr;
2344                 *behavior = FC_ALLOW_STREAMING;
2345                 rval = FC_CAP_FOUND;
2346 
2347         } else if (strcmp(cap, FC_CAP_FCP_DMA) == 0) {
2348                 fc_fcp_dma_t   *fcp_dma;
2349 
2350                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
2351                     "fca_get_cap: FC_CAP_FCP_DMA");
2352 
2353                 fcp_dma = (fc_fcp_dma_t *)ptr;
2354                 *fcp_dma = FC_DVMA_SPACE;
2355                 rval = FC_CAP_FOUND;
2356 
2357         } else {
2358                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
2359                     "fca_get_cap: Unknown capability. [%s]", cap);
2360 
2361                 rval = FC_CAP_ERROR;
2362 
2363         }
2364 
2365         return (rval);
2366 
2367 } /* emlxs_fca_get_cap() */
2368 
2369 
2370 
2371 static int
2372 emlxs_fca_set_cap(opaque_t fca_port_handle, char *cap, void *ptr)
2373 {
2374         emlxs_port_t *port = (emlxs_port_t *)fca_port_handle;
2375 
2376         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
2377             "fca_set_cap: cap=[%s] arg=%p", cap, ptr);
2378 
2379         return (FC_CAP_ERROR);
2380 
2381 } /* emlxs_fca_set_cap() */
2382 
2383 
2384 static opaque_t
2385 emlxs_fca_get_device(opaque_t fca_port_handle, fc_portid_t d_id)
2386 {
2387         emlxs_port_t *port = (emlxs_port_t *)fca_port_handle;
2388 
2389         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
2390             "fca_get_device: did=%x", d_id.port_id);
2391 
2392         return (NULL);
2393 
2394 } /* emlxs_fca_get_device() */
2395 
2396 
2397 static int32_t
2398 emlxs_fca_notify(opaque_t fca_port_handle, uint32_t cmd)
2399 {
2400         emlxs_port_t *port = (emlxs_port_t *)fca_port_handle;
2401 
2402         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg, "fca_notify: cmd=%x",
2403             cmd);
2404 
2405         return (FC_SUCCESS);
2406 
2407 } /* emlxs_fca_notify */
2408 
2409 
2410 
2411 static int
2412 emlxs_fca_get_map(opaque_t fca_port_handle, fc_lilpmap_t *mapbuf)
2413 {
2414         emlxs_port_t    *port = (emlxs_port_t *)fca_port_handle;
2415         emlxs_hba_t     *hba = HBA;
2416         uint32_t        lilp_length;
2417 
2418         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
2419             "fca_get_map: mapbuf=%p length=%d (%X,%X,%X,%X)", mapbuf,
2420             port->alpa_map[0], port->alpa_map[1], port->alpa_map[2],
2421             port->alpa_map[3], port->alpa_map[4]);
2422 
2423         if (!(port->flag & EMLXS_INI_BOUND)) {
2424                 return (FC_NOMAP);
2425         }
2426 
2427         if (hba->topology != TOPOLOGY_LOOP) {
2428                 return (FC_NOMAP);
2429         }
2430 
2431         /* Check if alpa map is available */
2432         if (port->alpa_map[0] != 0) {
2433                 mapbuf->lilp_magic  = MAGIC_LILP;
2434         } else {        /* No LILP map available */
2435 
2436                 /* Set lilp_magic to MAGIC_LISA and this will */
2437                 /* trigger an ALPA scan in ULP */
2438                 mapbuf->lilp_magic  = MAGIC_LISA;
2439         }
2440 
2441         mapbuf->lilp_myalpa = port->did;
2442 
2443         /* The first byte of the alpa_map is the lilp map length */
2444         /* Add one to include the lilp length byte itself */
2445         lilp_length = (uint32_t)port->alpa_map[0] + 1;
2446 
2447         /* Make sure the max transfer is 128 bytes */
2448         if (lilp_length > 128) {
2449                 lilp_length = 128;
2450         }
2451 
2452         /* We start copying from the lilp_length field */
2453         /* in order to get a word aligned address */
2454         bcopy((void *)&port->alpa_map, (void *)&mapbuf->lilp_length,
2455             lilp_length);
2456 
2457         return (FC_SUCCESS);
2458 
2459 } /* emlxs_fca_get_map() */
2460 
2461 
2462 
2463 extern int
2464 emlxs_fca_transport(opaque_t fca_port_handle, fc_packet_t *pkt)
2465 {
2466         emlxs_port_t    *port = (emlxs_port_t *)fca_port_handle;
2467         emlxs_hba_t     *hba = HBA;
2468         emlxs_buf_t     *sbp;
2469         uint32_t        rval;
2470         uint32_t        pkt_flags;
2471 
2472         /* Validate packet */
2473         sbp = PKT2PRIV(pkt);
2474 
2475         /* Make sure adapter is online */
2476         if (!(hba->flag & FC_ONLINE_MODE) &&
2477             !(sbp->pkt_flags & PACKET_ALLOCATED)) {
2478                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_failed_msg,
2479                     "Adapter offline.");
2480 
2481                 rval = (hba->flag & FC_ONLINING_MODE) ?
2482                     FC_TRAN_BUSY : FC_OFFLINE;
2483                 return (rval);
2484         }
2485 
2486         /* Make sure ULP was told that the port was online */
2487         if ((port->ulp_statec == FC_STATE_OFFLINE) &&
2488             !(sbp->pkt_flags & PACKET_ALLOCATED)) {
2489                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_msg,
2490                     "Port offline.");
2491 
2492                 return (FC_OFFLINE);
2493         }
2494 
2495         if (sbp->port != port) {
2496                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_error_msg,
2497                     "Invalid port handle. sbp=%p port=%p flags=%x", sbp,
2498                     sbp->port, sbp->pkt_flags);
2499                 return (FC_BADPACKET);
2500         }
2501 
2502         if (!(sbp->pkt_flags & (PACKET_VALID | PACKET_ULP_OWNED))) {
2503                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_error_msg,
2504                     "Invalid packet flags. sbp=%p port=%p flags=%x", sbp,
2505                     sbp->port, sbp->pkt_flags);
2506                 return (FC_BADPACKET);
2507         }
2508 
2509 #ifdef SFCT_SUPPORT
2510         if ((port->mode == MODE_TARGET) && !sbp->fct_cmd &&
2511             !(sbp->pkt_flags & PACKET_ALLOCATED)) {
2512                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_error_msg,
2513                     "Packet blocked. Target mode.");
2514                 return (FC_TRANSPORT_ERROR);
2515         }
2516 #endif /* SFCT_SUPPORT */
2517 
2518 #ifdef IDLE_TIMER
2519         emlxs_pm_busy_component(hba);
2520 #endif  /* IDLE_TIMER */
2521 
2522         /* Prepare the packet for transport */
2523         emlxs_initialize_pkt(port, sbp);
2524 
2525         /* Save a copy of the pkt flags. */
2526         /* We will check the polling flag later */
2527         pkt_flags = sbp->pkt_flags;
2528 
2529         /* Send the packet */
2530         switch (pkt->pkt_tran_type) {
2531         case FC_PKT_FCP_READ:
2532         case FC_PKT_FCP_WRITE:
2533                 rval = emlxs_send_fcp_cmd(port, sbp, &pkt_flags);
2534                 break;
2535 
2536         case FC_PKT_IP_WRITE:
2537         case FC_PKT_BROADCAST:
2538                 rval = emlxs_send_ip(port, sbp);
2539                 break;
2540 
2541         case FC_PKT_EXCHANGE:
2542                 switch (pkt->pkt_cmd_fhdr.type) {
2543                 case FC_TYPE_SCSI_FCP:
2544                         rval = emlxs_send_fcp_cmd(port, sbp, &pkt_flags);
2545                         break;
2546 
2547                 case FC_TYPE_FC_SERVICES:
2548                         rval = emlxs_send_ct(port, sbp);
2549                         break;
2550 
2551 #ifdef MENLO_SUPPORT
2552                 case EMLXS_MENLO_TYPE:
2553                         rval = emlxs_send_menlo(port, sbp);
2554                         break;
2555 #endif /* MENLO_SUPPORT */
2556 
2557                 default:
2558                         rval = emlxs_send_els(port, sbp);
2559                 }
2560                 break;
2561 
2562         case FC_PKT_OUTBOUND:
2563                 switch (pkt->pkt_cmd_fhdr.type) {
2564 #ifdef SFCT_SUPPORT
2565                 case FC_TYPE_SCSI_FCP:
2566                         rval = emlxs_send_fct_status(port, sbp);
2567                         break;
2568 
2569                 case FC_TYPE_BASIC_LS:
2570                         rval = emlxs_send_fct_abort(port, sbp);
2571                         break;
2572 #endif /* SFCT_SUPPORT */
2573 
2574                 case FC_TYPE_FC_SERVICES:
2575                         rval = emlxs_send_ct_rsp(port, sbp);
2576                         break;
2577 #ifdef MENLO_SUPPORT
2578                 case EMLXS_MENLO_TYPE:
2579                         rval = emlxs_send_menlo(port, sbp);
2580                         break;
2581 #endif /* MENLO_SUPPORT */
2582 
2583                 default:
2584                         rval = emlxs_send_els_rsp(port, sbp);
2585                 }
2586                 break;
2587 
2588         default:
2589                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_error_msg,
2590                     "Unsupported pkt_tran_type. type=%x", pkt->pkt_tran_type);
2591                 rval = FC_TRANSPORT_ERROR;
2592                 break;
2593         }
2594 
2595         /* Check if send was not successful */
2596         if (rval != FC_SUCCESS) {
2597                 /* Return packet to ULP */
2598                 mutex_enter(&sbp->mtx);
2599                 sbp->pkt_flags |= PACKET_ULP_OWNED;
2600                 mutex_exit(&sbp->mtx);
2601 
2602                 return (rval);
2603         }
2604 
2605         /* Check if this packet should be polled for completion before */
2606         /* returning. This check must be done with a saved copy of the */
2607         /* pkt_flags because the packet itself could already be freed from */
2608         /* memory if it was not polled. */
2609         if (pkt_flags & PACKET_POLLED) {
2610                 emlxs_poll(port, sbp);
2611         }
2612 
2613         return (FC_SUCCESS);
2614 
2615 } /* emlxs_fca_transport() */
2616 
2617 
2618 
2619 static void
2620 emlxs_poll(emlxs_port_t *port, emlxs_buf_t *sbp)
2621 {
2622         emlxs_hba_t     *hba = HBA;
2623         fc_packet_t     *pkt = PRIV2PKT(sbp);
2624         clock_t         timeout;
2625         clock_t         time;
2626         CHANNEL *cp;
2627         int             in_panic = 0;
2628 
2629         mutex_enter(&EMLXS_PORT_LOCK);
2630         hba->io_poll_count++;
2631         mutex_exit(&EMLXS_PORT_LOCK);
2632 
2633         /* Check for panic situation */
2634         cp = (CHANNEL *)sbp->channel;
2635 
2636         if (ddi_in_panic()) {
2637                 in_panic = 1;
2638                 /*
2639                  * In panic situations there will be one thread with
2640                  * no interrrupts (hard or soft) and no timers
2641                  */
2642 
2643                 /*
2644                  * We must manually poll everything in this thread
2645                  * to keep the driver going.
2646                  */
2647 
2648                 /* Keep polling the chip until our IO is completed */
2649                 /* Driver's timer will not function during panics. */
2650                 /* Therefore, timer checks must be performed manually. */
2651                 (void) drv_getparm(LBOLT, &time);
2652                 timeout = time + drv_usectohz(1000000);
2653                 while (!(sbp->pkt_flags & PACKET_COMPLETED)) {
2654                         EMLXS_SLI_POLL_INTR(hba);
2655                         (void) drv_getparm(LBOLT, &time);
2656 
2657                         /* Trigger timer checks periodically */
2658                         if (time >= timeout) {
2659                                 emlxs_timer_checks(hba);
2660                                 timeout = time + drv_usectohz(1000000);
2661                         }
2662                 }
2663         } else {
2664                 /* Wait for IO completion */
2665                 /* The driver's timer will detect */
2666                 /* any timeout and abort the I/O. */
2667                 mutex_enter(&EMLXS_PKT_LOCK);
2668                 while (!(sbp->pkt_flags & PACKET_COMPLETED)) {
2669                         cv_wait(&EMLXS_PKT_CV, &EMLXS_PKT_LOCK);
2670                 }
2671                 mutex_exit(&EMLXS_PKT_LOCK);
2672         }
2673 
2674         /* Check for fcp reset pkt */
2675         if (sbp->pkt_flags & PACKET_FCP_RESET) {
2676                 if (sbp->pkt_flags & PACKET_FCP_TGT_RESET) {
2677                         /* Flush the IO's on the chipq */
2678                         (void) emlxs_chipq_node_flush(port,
2679                             &hba->chan[hba->channel_fcp],
2680                             sbp->node, sbp);
2681                 } else {
2682                         /* Flush the IO's on the chipq for this lun */
2683                         (void) emlxs_chipq_lun_flush(port,
2684                             sbp->node, sbp->lun, sbp);
2685                 }
2686 
2687                 if (sbp->flush_count == 0) {
2688                         emlxs_node_open(port, sbp->node, hba->channel_fcp);
2689                         goto done;
2690                 }
2691 
2692                 /* Set the timeout so the flush has time to complete */
2693                 timeout = emlxs_timeout(hba, 60);
2694                 (void) drv_getparm(LBOLT, &time);
2695                 while ((time < timeout) && sbp->flush_count > 0) {
2696                         delay(drv_usectohz(500000));
2697                         (void) drv_getparm(LBOLT, &time);
2698                 }
2699 
2700                 if (sbp->flush_count == 0) {
2701                         emlxs_node_open(port, sbp->node, hba->channel_fcp);
2702                         goto done;
2703                 }
2704 
2705                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_flush_timeout_msg,
2706                     "sbp=%p flush_count=%d. Waiting...", sbp,
2707                     sbp->flush_count);
2708 
2709                 /* Let's try this one more time */
2710 
2711                 if (sbp->pkt_flags & PACKET_FCP_TGT_RESET) {
2712                         /* Flush the IO's on the chipq */
2713                         (void) emlxs_chipq_node_flush(port,
2714                             &hba->chan[hba->channel_fcp],
2715                             sbp->node, sbp);
2716                 } else {
2717                         /* Flush the IO's on the chipq for this lun */
2718                         (void) emlxs_chipq_lun_flush(port,
2719                             sbp->node, sbp->lun, sbp);
2720                 }
2721 
2722                 /* Reset the timeout so the flush has time to complete */
2723                 timeout = emlxs_timeout(hba, 60);
2724                 (void) drv_getparm(LBOLT, &time);
2725                 while ((time < timeout) && sbp->flush_count > 0) {
2726                         delay(drv_usectohz(500000));
2727                         (void) drv_getparm(LBOLT, &time);
2728                 }
2729 
2730                 if (sbp->flush_count == 0) {
2731                         emlxs_node_open(port, sbp->node, hba->channel_fcp);
2732                         goto done;
2733                 }
2734 
2735                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_flush_timeout_msg,
2736                     "sbp=%p flush_count=%d. Resetting link.", sbp,
2737                     sbp->flush_count);
2738 
2739                 /* Let's first try to reset the link */
2740                 (void) emlxs_reset(port, FC_FCA_LINK_RESET);
2741 
2742                 if (sbp->flush_count == 0) {
2743                         goto done;
2744                 }
2745 
2746                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_flush_timeout_msg,
2747                     "sbp=%p flush_count=%d. Resetting HBA.", sbp,
2748                     sbp->flush_count);
2749 
2750                 /* If that doesn't work, reset the adapter */
2751                 (void) emlxs_reset(port, FC_FCA_RESET);
2752 
2753                 if (sbp->flush_count != 0) {
2754                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_flush_timeout_msg,
2755                             "sbp=%p flush_count=%d. Giving up.", sbp,
2756                             sbp->flush_count);
2757                 }
2758 
2759         }
2760         /* PACKET_FCP_RESET */
2761 done:
2762 
2763         /* Packet has been declared completed and is now ready to be returned */
2764 
2765 #if (EMLXS_MODREVX == EMLXS_MODREV2X)
2766         emlxs_unswap_pkt(sbp);
2767 #endif  /* EMLXS_MODREV2X */
2768 
2769         mutex_enter(&sbp->mtx);
2770         sbp->pkt_flags |= PACKET_ULP_OWNED;
2771         mutex_exit(&sbp->mtx);
2772 
2773         mutex_enter(&EMLXS_PORT_LOCK);
2774         hba->io_poll_count--;
2775         mutex_exit(&EMLXS_PORT_LOCK);
2776 
2777 #ifdef FMA_SUPPORT
2778         if (!in_panic) {
2779                 emlxs_check_dma(hba, sbp);
2780         }
2781 #endif
2782 
2783         /* Make ULP completion callback if required */
2784         if (pkt->pkt_comp) {
2785                 cp->ulpCmplCmd++;
2786                 (*pkt->pkt_comp) (pkt);
2787         }
2788 
2789 #ifdef FMA_SUPPORT
2790         if (hba->flag & FC_DMA_CHECK_ERROR) {
2791                 emlxs_thread_spawn(hba, emlxs_restart_thread,
2792                     NULL, NULL);
2793         }
2794 #endif
2795 
2796         return;
2797 
2798 } /* emlxs_poll() */
2799 
2800 
2801 static int
2802 emlxs_fca_ub_alloc(opaque_t fca_port_handle, uint64_t tokens[], uint32_t size,
2803     uint32_t *count, uint32_t type)
2804 {
2805         emlxs_port_t            *port = (emlxs_port_t *)fca_port_handle;
2806         emlxs_hba_t             *hba = HBA;
2807         char                    *err = NULL;
2808         emlxs_unsol_buf_t       *pool = NULL;
2809         emlxs_unsol_buf_t       *new_pool = NULL;
2810         emlxs_config_t          *cfg = &CFG;
2811         int32_t                 i;
2812         int                     result;
2813         uint32_t                free_resv;
2814         uint32_t                free;
2815         fc_unsol_buf_t          *ubp;
2816         emlxs_ub_priv_t         *ub_priv;
2817         int                     rc;
2818 
2819         if (!(port->flag & EMLXS_INI_ENABLED)) {
2820                 if (tokens && count) {
2821                         bzero(tokens, (sizeof (uint64_t) * (*count)));
2822                 }
2823                 return (FC_SUCCESS);
2824         }
2825 
2826         if (!(port->flag & EMLXS_INI_BOUND)) {
2827                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
2828                     "fca_ub_alloc failed: Port not bound!  size=%x count=%d "
2829                     "type=%x", size, *count, type);
2830 
2831                 return (FC_FAILURE);
2832         }
2833 
2834         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
2835             "fca_ub_alloc: size=%x count=%d type=%x", size, *count, type);
2836 
2837         if (count && (*count > EMLXS_MAX_UBUFS)) {
2838                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg,
2839                     "fca_ub_alloc failed: Too many unsolicted buffers "
2840                     "requested. count=%x", *count);
2841 
2842                 return (FC_FAILURE);
2843 
2844         }
2845 
2846         if (tokens == NULL) {
2847                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg,
2848                     "fca_ub_alloc failed: Token array is NULL.");
2849 
2850                 return (FC_FAILURE);
2851         }
2852 
2853         /* Clear the token array */
2854         bzero(tokens, (sizeof (uint64_t) * (*count)));
2855 
2856         free_resv = 0;
2857         free = *count;
2858         switch (type) {
2859         case FC_TYPE_BASIC_LS:
2860                 err = "BASIC_LS";
2861                 break;
2862         case FC_TYPE_EXTENDED_LS:
2863                 err = "EXTENDED_LS";
2864                 free = *count / 2;      /* Hold 50% for normal use */
2865                 free_resv = *count - free;      /* Reserve 50% for RSCN use */
2866                 break;
2867         case FC_TYPE_IS8802:
2868                 err = "IS8802";
2869                 break;
2870         case FC_TYPE_IS8802_SNAP:
2871                 err = "IS8802_SNAP";
2872 
2873                 if (cfg[CFG_NETWORK_ON].current == 0) {
2874                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
2875                             "fca_ub_alloc failed: IP support is disabled.");
2876 
2877                         return (FC_FAILURE);
2878                 }
2879                 break;
2880         case FC_TYPE_SCSI_FCP:
2881                 err = "SCSI_FCP";
2882                 break;
2883         case FC_TYPE_SCSI_GPP:
2884                 err = "SCSI_GPP";
2885                 break;
2886         case FC_TYPE_HIPP_FP:
2887                 err = "HIPP_FP";
2888                 break;
2889         case FC_TYPE_IPI3_MASTER:
2890                 err = "IPI3_MASTER";
2891                 break;
2892         case FC_TYPE_IPI3_SLAVE:
2893                 err = "IPI3_SLAVE";
2894                 break;
2895         case FC_TYPE_IPI3_PEER:
2896                 err = "IPI3_PEER";
2897                 break;
2898         case FC_TYPE_FC_SERVICES:
2899                 err = "FC_SERVICES";
2900                 break;
2901         }
2902 
2903         mutex_enter(&EMLXS_UB_LOCK);
2904 
2905         /*
2906          * Walk through the list of the unsolicited buffers
2907          * for this ddiinst of emlx.
2908          */
2909 
2910         pool = port->ub_pool;
2911 
2912         /*
2913          * The emlxs_fca_ub_alloc() can be called more than once with different
2914          * size. We will reject the call if there are
2915          * duplicate size with the same FC-4 type.
2916          */
2917         while (pool) {
2918                 if ((pool->pool_type == type) &&
2919                     (pool->pool_buf_size == size)) {
2920                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg,
2921                             "fca_ub_alloc failed: Unsolicited buffer pool "
2922                             "for %s of size 0x%x bytes already exists.",
2923                             err, size);
2924 
2925                         result = FC_FAILURE;
2926                         goto fail;
2927                 }
2928 
2929                 pool = pool->pool_next;
2930         }
2931 
2932         mutex_exit(&EMLXS_UB_LOCK);
2933 
2934         new_pool = (emlxs_unsol_buf_t *)kmem_zalloc(sizeof (emlxs_unsol_buf_t),
2935             KM_SLEEP);
2936 
2937         new_pool->pool_next = NULL;
2938         new_pool->pool_type = type;
2939         new_pool->pool_buf_size = size;
2940         new_pool->pool_nentries = *count;
2941         new_pool->pool_available = new_pool->pool_nentries;
2942         new_pool->pool_free = free;
2943         new_pool->pool_free_resv = free_resv;
2944         new_pool->fc_ubufs =
2945             kmem_zalloc((sizeof (fc_unsol_buf_t) * (*count)), KM_SLEEP);
2946 
2947         new_pool->pool_first_token = port->ub_count;
2948         new_pool->pool_last_token = port->ub_count + new_pool->pool_nentries;
2949 
2950         for (i = 0; i < new_pool->pool_nentries; i++) {
2951                 ubp = (fc_unsol_buf_t *)&new_pool->fc_ubufs[i];
2952                 ubp->ub_port_handle = port->ulp_handle;
2953                 ubp->ub_token = (uint64_t)((unsigned long)ubp);
2954                 ubp->ub_bufsize = size;
2955                 ubp->ub_class = FC_TRAN_CLASS3;
2956                 ubp->ub_port_private = NULL;
2957                 ubp->ub_fca_private =
2958                     (emlxs_ub_priv_t *)kmem_zalloc(sizeof (emlxs_ub_priv_t),
2959                     KM_SLEEP);
2960 
2961                 /*
2962                  * Initialize emlxs_ub_priv_t
2963                  */
2964                 ub_priv = ubp->ub_fca_private;
2965                 ub_priv->ubp = ubp;
2966                 ub_priv->port = port;
2967                 ub_priv->flags = EMLXS_UB_FREE;
2968                 ub_priv->available = 1;
2969                 ub_priv->pool = new_pool;
2970                 ub_priv->time = 0;
2971                 ub_priv->timeout = 0;
2972                 ub_priv->token = port->ub_count;
2973                 ub_priv->cmd = 0;
2974 
2975                 /* Allocate the actual buffer */
2976                 ubp->ub_buffer = (caddr_t)kmem_zalloc(size, KM_SLEEP);
2977 
2978 
2979                 tokens[i] = (uint64_t)((unsigned long)ubp);
2980                 port->ub_count++;
2981         }
2982 
2983         mutex_enter(&EMLXS_UB_LOCK);
2984 
2985         /* Add the pool to the top of the pool list */
2986         new_pool->pool_prev = NULL;
2987         new_pool->pool_next = port->ub_pool;
2988 
2989         if (port->ub_pool) {
2990                 port->ub_pool->pool_prev = new_pool;
2991         }
2992         port->ub_pool = new_pool;
2993 
2994         /* Set the post counts */
2995         if (type == FC_TYPE_IS8802_SNAP) {
2996                 MAILBOXQ        *mbox;
2997 
2998                 port->ub_post[hba->channel_ip] += new_pool->pool_nentries;
2999 
3000                 if ((mbox = (MAILBOXQ *)emlxs_mem_get(hba,
3001                     MEM_MBOX))) {
3002                         emlxs_mb_config_farp(hba, mbox);
3003                         rc =  EMLXS_SLI_ISSUE_MBOX_CMD(hba,
3004                             mbox, MBX_NOWAIT, 0);
3005                         if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
3006                                 emlxs_mem_put(hba, MEM_MBOX, (void *)mbox);
3007                         }
3008                 }
3009                 port->flag |= EMLXS_PORT_IP_UP;
3010         } else if (type == FC_TYPE_EXTENDED_LS) {
3011                 port->ub_post[hba->channel_els] += new_pool->pool_nentries;
3012         } else if (type == FC_TYPE_FC_SERVICES) {
3013                 port->ub_post[hba->channel_ct] += new_pool->pool_nentries;
3014         }
3015 
3016         mutex_exit(&EMLXS_UB_LOCK);
3017 
3018         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
3019             "%d unsolicited buffers allocated for %s of size 0x%x bytes.",
3020             *count, err, size);
3021 
3022         return (FC_SUCCESS);
3023 
3024 fail:
3025 
3026         /* Clean the pool */
3027         for (i = 0; tokens[i] != NULL; i++) {
3028                 /* Get the buffer object */
3029                 ubp = (fc_unsol_buf_t *)((unsigned long)tokens[i]);
3030                 ub_priv = (emlxs_ub_priv_t *)ubp->ub_fca_private;
3031 
3032                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_detail_msg,
3033                     "fca_ub_alloc failed: Freed buffer=%p token=%x size=%x "
3034                     "type=%x ", ubp, ub_priv->token, ubp->ub_bufsize, type);
3035 
3036                 /* Free the actual buffer */
3037                 kmem_free(ubp->ub_buffer, ubp->ub_bufsize);
3038 
3039                 /* Free the private area of the buffer object */
3040                 kmem_free(ubp->ub_fca_private, sizeof (emlxs_ub_priv_t));
3041 
3042                 tokens[i] = 0;
3043                 port->ub_count--;
3044         }
3045 
3046         if (new_pool) {
3047                 /* Free the array of buffer objects in the pool */
3048                 kmem_free((caddr_t)new_pool->fc_ubufs,
3049                     (sizeof (fc_unsol_buf_t) * new_pool->pool_nentries));
3050 
3051                 /* Free the pool object */
3052                 kmem_free((caddr_t)new_pool, sizeof (emlxs_unsol_buf_t));
3053         }
3054 
3055         mutex_exit(&EMLXS_UB_LOCK);
3056 
3057         return (result);
3058 
3059 } /* emlxs_fca_ub_alloc() */
3060 
3061 
3062 static void
3063 emlxs_ub_els_reject(emlxs_port_t *port, fc_unsol_buf_t *ubp)
3064 {
3065         emlxs_hba_t     *hba = HBA;
3066         emlxs_ub_priv_t *ub_priv;
3067         fc_packet_t     *pkt;
3068         ELS_PKT         *els;
3069         uint32_t        sid;
3070 
3071         ub_priv = (emlxs_ub_priv_t *)ubp->ub_fca_private;
3072 
3073         if (hba->state <= FC_LINK_DOWN) {
3074                 emlxs_abort_els_exchange(hba, port, ubp->ub_frame.rx_id);
3075                 return;
3076         }
3077 
3078         if (!(pkt = emlxs_pkt_alloc(port, sizeof (uint32_t) +
3079             sizeof (LS_RJT), 0, 0, KM_NOSLEEP))) {
3080                 emlxs_abort_els_exchange(hba, port, ubp->ub_frame.rx_id);
3081                 return;
3082         }
3083 
3084         sid = LE_SWAP24_LO(ubp->ub_frame.s_id);
3085 
3086         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_unsol_els_msg,
3087             "%s dropped: sid=%x. Rejecting.",
3088             emlxs_elscmd_xlate(ub_priv->cmd), sid);
3089 
3090         pkt->pkt_tran_type = FC_PKT_OUTBOUND;
3091         pkt->pkt_timeout = (2 * hba->fc_ratov);
3092 
3093         if ((uint32_t)ubp->ub_class == FC_TRAN_CLASS2) {
3094                 pkt->pkt_tran_flags &= ~FC_TRAN_CLASS3;
3095                 pkt->pkt_tran_flags |= FC_TRAN_CLASS2;
3096         }
3097 
3098         /* Build the fc header */
3099         pkt->pkt_cmd_fhdr.d_id = ubp->ub_frame.s_id;
3100         pkt->pkt_cmd_fhdr.r_ctl =
3101             R_CTL_EXTENDED_SVC | R_CTL_SOLICITED_CONTROL;
3102         pkt->pkt_cmd_fhdr.s_id = LE_SWAP24_LO(port->did);
3103         pkt->pkt_cmd_fhdr.type = FC_TYPE_EXTENDED_LS;
3104         pkt->pkt_cmd_fhdr.f_ctl =
3105             F_CTL_XCHG_CONTEXT | F_CTL_LAST_SEQ | F_CTL_END_SEQ;
3106         pkt->pkt_cmd_fhdr.seq_id = 0;
3107         pkt->pkt_cmd_fhdr.df_ctl = 0;
3108         pkt->pkt_cmd_fhdr.seq_cnt = 0;
3109         pkt->pkt_cmd_fhdr.ox_id = (ub_priv->cmd >> ELS_CMD_SHIFT) & 0xff;
3110         pkt->pkt_cmd_fhdr.rx_id = ubp->ub_frame.rx_id;
3111         pkt->pkt_cmd_fhdr.ro = 0;
3112 
3113         /* Build the command */
3114         els = (ELS_PKT *) pkt->pkt_cmd;
3115         els->elsCode = 0x01;
3116         els->un.lsRjt.un.b.lsRjtRsvd0 = 0;
3117         els->un.lsRjt.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
3118         els->un.lsRjt.un.b.lsRjtRsnCodeExp = LSEXP_NOTHING_MORE;
3119         els->un.lsRjt.un.b.vendorUnique = 0x02;
3120 
3121         /* Send the pkt later in another thread */
3122         (void) emlxs_pkt_send(pkt, 0);
3123 
3124         return;
3125 
3126 } /* emlxs_ub_els_reject() */
3127 
3128 extern int
3129 emlxs_fca_ub_release(opaque_t fca_port_handle, uint32_t count,
3130     uint64_t tokens[])
3131 {
3132         emlxs_port_t            *port = (emlxs_port_t *)fca_port_handle;
3133         emlxs_hba_t             *hba = HBA;
3134         fc_unsol_buf_t          *ubp;
3135         emlxs_ub_priv_t         *ub_priv;
3136         uint32_t                i;
3137         uint32_t                time;
3138         emlxs_unsol_buf_t       *pool;
3139 
3140         if (count == 0) {
3141                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3142                     "fca_ub_release: Nothing to do. count=%d", count);
3143 
3144                 return (FC_SUCCESS);
3145         }
3146 
3147         if (!(port->flag & EMLXS_INI_BOUND)) {
3148                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3149                     "fca_ub_release failed: Port not bound. count=%d "
3150                     "token[0]=%p",
3151                     count, tokens[0]);
3152 
3153                 return (FC_UNBOUND);
3154         }
3155 
3156         mutex_enter(&EMLXS_UB_LOCK);
3157 
3158         if (!port->ub_pool) {
3159                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3160                     "fca_ub_release failed: No pools! count=%d token[0]=%p",
3161                     count, tokens[0]);
3162 
3163                 mutex_exit(&EMLXS_UB_LOCK);
3164                 return (FC_UB_BADTOKEN);
3165         }
3166 
3167         for (i = 0; i < count; i++) {
3168                 ubp = (fc_unsol_buf_t *)((unsigned long)tokens[i]);
3169 
3170                 if (!ubp) {
3171                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3172                             "fca_ub_release failed: count=%d tokens[%d]=0",
3173                             count, i);
3174 
3175                         mutex_exit(&EMLXS_UB_LOCK);
3176                         return (FC_UB_BADTOKEN);
3177                 }
3178 
3179                 ub_priv = (emlxs_ub_priv_t *)ubp->ub_fca_private;
3180 
3181                 if (!ub_priv || (ub_priv == (emlxs_ub_priv_t *)DEAD_PTR)) {
3182                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3183                             "fca_ub_release failed: Dead buffer found. ubp=%p",
3184                             ubp);
3185 
3186                         mutex_exit(&EMLXS_UB_LOCK);
3187                         return (FC_UB_BADTOKEN);
3188                 }
3189 
3190                 if (ub_priv->flags == EMLXS_UB_FREE) {
3191                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3192                             "fca_ub_release: Buffer already free! ubp=%p "
3193                             "token=%x",
3194                             ubp, ub_priv->token);
3195 
3196                         continue;
3197                 }
3198 
3199                 /* Check for dropped els buffer */
3200                 /* ULP will do this sometimes without sending a reply */
3201                 if ((ubp->ub_frame.r_ctl == FC_ELS_REQ) &&
3202                     !(ub_priv->flags & EMLXS_UB_REPLY)) {
3203                         emlxs_ub_els_reject(port, ubp);
3204                 }
3205 
3206                 /* Mark the buffer free */
3207                 ub_priv->flags = EMLXS_UB_FREE;
3208                 bzero(ubp->ub_buffer, ubp->ub_bufsize);
3209 
3210                 time = hba->timer_tics - ub_priv->time;
3211                 ub_priv->time = 0;
3212                 ub_priv->timeout = 0;
3213 
3214                 pool = ub_priv->pool;
3215 
3216                 if (ub_priv->flags & EMLXS_UB_RESV) {
3217                         pool->pool_free_resv++;
3218                 } else {
3219                         pool->pool_free++;
3220                 }
3221 
3222                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_detail_msg,
3223                     "fca_ub_release: ubp=%p token=%x time=%d av=%d "
3224                     "(%d,%d,%d,%d)",
3225                     ubp, ub_priv->token, time, ub_priv->available,
3226                     pool->pool_nentries, pool->pool_available,
3227                     pool->pool_free, pool->pool_free_resv);
3228 
3229                 /* Check if pool can be destroyed now */
3230                 if ((pool->pool_available == 0) &&
3231                     (pool->pool_free + pool->pool_free_resv ==
3232                     pool->pool_nentries)) {
3233                         emlxs_ub_destroy(port, pool);
3234                 }
3235         }
3236 
3237         mutex_exit(&EMLXS_UB_LOCK);
3238 
3239         return (FC_SUCCESS);
3240 
3241 } /* emlxs_fca_ub_release() */
3242 
3243 
3244 static int
3245 emlxs_fca_ub_free(opaque_t fca_port_handle, uint32_t count, uint64_t tokens[])
3246 {
3247         emlxs_port_t            *port = (emlxs_port_t *)fca_port_handle;
3248         emlxs_unsol_buf_t       *pool;
3249         fc_unsol_buf_t          *ubp;
3250         emlxs_ub_priv_t         *ub_priv;
3251         uint32_t                i;
3252 
3253         if (!(port->flag & EMLXS_INI_ENABLED)) {
3254                 return (FC_SUCCESS);
3255         }
3256 
3257         if (count == 0) {
3258                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3259                     "fca_ub_free: Nothing to do. count=%d token[0]=%p", count,
3260                     tokens[0]);
3261 
3262                 return (FC_SUCCESS);
3263         }
3264 
3265         if (!(port->flag & EMLXS_INI_BOUND)) {
3266                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3267                     "fca_ub_free: Port not bound. count=%d token[0]=%p", count,
3268                     tokens[0]);
3269 
3270                 return (FC_SUCCESS);
3271         }
3272 
3273         mutex_enter(&EMLXS_UB_LOCK);
3274 
3275         if (!port->ub_pool) {
3276                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3277                     "fca_ub_free failed: No pools! count=%d token[0]=%p", count,
3278                     tokens[0]);
3279 
3280                 mutex_exit(&EMLXS_UB_LOCK);
3281                 return (FC_UB_BADTOKEN);
3282         }
3283 
3284         /* Process buffer list */
3285         for (i = 0; i < count; i++) {
3286                 ubp = (fc_unsol_buf_t *)((unsigned long)tokens[i]);
3287 
3288                 if (!ubp) {
3289                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3290                             "fca_ub_free failed: count=%d tokens[%d]=0", count,
3291                             i);
3292 
3293                         mutex_exit(&EMLXS_UB_LOCK);
3294                         return (FC_UB_BADTOKEN);
3295                 }
3296 
3297                 /* Mark buffer unavailable */
3298                 ub_priv = (emlxs_ub_priv_t *)ubp->ub_fca_private;
3299 
3300                 if (!ub_priv || (ub_priv == (emlxs_ub_priv_t *)DEAD_PTR)) {
3301                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3302                             "fca_ub_free failed: Dead buffer found. ubp=%p",
3303                             ubp);
3304 
3305                         mutex_exit(&EMLXS_UB_LOCK);
3306                         return (FC_UB_BADTOKEN);
3307                 }
3308 
3309                 ub_priv->available = 0;
3310 
3311                 /* Mark one less buffer available in the parent pool */
3312                 pool = ub_priv->pool;
3313 
3314                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_detail_msg,
3315                     "fca_ub_free: ubp=%p token=%x (%d,%d,%d,%d)", ubp,
3316                     ub_priv->token, pool->pool_nentries,
3317                     pool->pool_available - 1, pool->pool_free,
3318                     pool->pool_free_resv);
3319 
3320                 if (pool->pool_available) {
3321                         pool->pool_available--;
3322 
3323                         /* Check if pool can be destroyed */
3324                         if ((pool->pool_available == 0) &&
3325                             (pool->pool_free + pool->pool_free_resv ==
3326                             pool->pool_nentries)) {
3327                                 emlxs_ub_destroy(port, pool);
3328                         }
3329                 }
3330         }
3331 
3332         mutex_exit(&EMLXS_UB_LOCK);
3333 
3334         return (FC_SUCCESS);
3335 
3336 } /* emlxs_fca_ub_free() */
3337 
3338 
3339 /* EMLXS_UB_LOCK must be held when calling this routine */
3340 extern void
3341 emlxs_ub_destroy(emlxs_port_t *port, emlxs_unsol_buf_t *pool)
3342 {
3343         emlxs_hba_t             *hba = HBA;
3344         emlxs_unsol_buf_t       *next;
3345         emlxs_unsol_buf_t       *prev;
3346         fc_unsol_buf_t          *ubp;
3347         uint32_t                i;
3348 
3349         /* Remove the pool object from the pool list */
3350         next = pool->pool_next;
3351         prev = pool->pool_prev;
3352 
3353         if (port->ub_pool == pool) {
3354                 port->ub_pool = next;
3355         }
3356 
3357         if (prev) {
3358                 prev->pool_next = next;
3359         }
3360 
3361         if (next) {
3362                 next->pool_prev = prev;
3363         }
3364 
3365         pool->pool_prev = NULL;
3366         pool->pool_next = NULL;
3367 
3368         /* Clear the post counts */
3369         switch (pool->pool_type) {
3370         case FC_TYPE_IS8802_SNAP:
3371                 port->ub_post[hba->channel_ip] -= pool->pool_nentries;
3372                 break;
3373 
3374         case FC_TYPE_EXTENDED_LS:
3375                 port->ub_post[hba->channel_els] -= pool->pool_nentries;
3376                 break;
3377 
3378         case FC_TYPE_FC_SERVICES:
3379                 port->ub_post[hba->channel_ct] -= pool->pool_nentries;
3380                 break;
3381         }
3382 
3383         /* Now free the pool memory */
3384         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3385             "ub_destroy: pool=%p type=%d size=%d count=%d", pool,
3386             pool->pool_type, pool->pool_buf_size, pool->pool_nentries);
3387 
3388         /* Process the array of buffer objects in the pool */
3389         for (i = 0; i < pool->pool_nentries; i++) {
3390                 /* Get the buffer object */
3391                 ubp = (fc_unsol_buf_t *)&pool->fc_ubufs[i];
3392 
3393                 /* Free the memory the buffer object represents */
3394                 kmem_free(ubp->ub_buffer, ubp->ub_bufsize);
3395 
3396                 /* Free the private area of the buffer object */
3397                 kmem_free(ubp->ub_fca_private, sizeof (emlxs_ub_priv_t));
3398         }
3399 
3400         /* Free the array of buffer objects in the pool */
3401         kmem_free((caddr_t)pool->fc_ubufs,
3402             (sizeof (fc_unsol_buf_t)*pool->pool_nentries));
3403 
3404         /* Free the pool object */
3405         kmem_free((caddr_t)pool, sizeof (emlxs_unsol_buf_t));
3406 
3407         return;
3408 
3409 } /* emlxs_ub_destroy() */
3410 
3411 
3412 /*ARGSUSED*/
3413 extern int
3414 emlxs_fca_pkt_abort(opaque_t fca_port_handle, fc_packet_t *pkt, int32_t sleep)
3415 {
3416         emlxs_port_t    *port = (emlxs_port_t *)fca_port_handle;
3417         emlxs_hba_t     *hba = HBA;
3418         emlxs_config_t  *cfg = &CFG;
3419 
3420         emlxs_buf_t     *sbp;
3421         NODELIST        *nlp;
3422         NODELIST        *prev_nlp;
3423         uint8_t         channelno;
3424         CHANNEL *cp;
3425         clock_t         pkt_timeout;
3426         clock_t         timer;
3427         clock_t         time;
3428         int32_t         pkt_ret;
3429         IOCBQ           *iocbq;
3430         IOCBQ           *next;
3431         IOCBQ           *prev;
3432         uint32_t        found;
3433         uint32_t        pass = 0;
3434 
3435         sbp = (emlxs_buf_t *)pkt->pkt_fca_private;
3436         iocbq = &sbp->iocbq;
3437         nlp = (NODELIST *)sbp->node;
3438         cp = (CHANNEL *)sbp->channel;
3439         channelno = (cp) ? cp->channelno : 0;
3440 
3441         if (!(port->flag & EMLXS_INI_BOUND)) {
3442                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_abort_failed_msg,
3443                     "Port not bound.");
3444                 return (FC_UNBOUND);
3445         }
3446 
3447         if (!(hba->flag & FC_ONLINE_MODE)) {
3448                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_abort_failed_msg,
3449                     "Adapter offline.");
3450                 return (FC_OFFLINE);
3451         }
3452 
3453         /* ULP requires the aborted pkt to be completed */
3454         /* back to ULP before returning from this call. */
3455         /* SUN knows of problems with this call so they suggested that we */
3456         /* always return a FC_FAILURE for this call, until it is worked out. */
3457 
3458         /* Check if pkt is no good */
3459         if (!(sbp->pkt_flags & PACKET_VALID) ||
3460             (sbp->pkt_flags & PACKET_ULP_OWNED)) {
3461                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_abort_failed_msg,
3462                     "Bad sbp. flags=%x", sbp->pkt_flags);
3463                 return (FC_FAILURE);
3464         }
3465 
3466         /* Tag this now */
3467         /* This will prevent any thread except ours from completing it */
3468         mutex_enter(&sbp->mtx);
3469 
3470         /* Check again if we still own this */
3471         if (!(sbp->pkt_flags & PACKET_VALID) ||
3472             (sbp->pkt_flags & PACKET_ULP_OWNED)) {
3473                 mutex_exit(&sbp->mtx);
3474                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_abort_failed_msg,
3475                     "Bad sbp. flags=%x", sbp->pkt_flags);
3476                 return (FC_FAILURE);
3477         }
3478 
3479         /* Check if pkt is a real polled command */
3480         if (!(sbp->pkt_flags & PACKET_IN_ABORT) &&
3481             (sbp->pkt_flags & PACKET_POLLED)) {
3482                 mutex_exit(&sbp->mtx);
3483 
3484                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_abort_failed_msg,
3485                     "Attempting to abort a polled I/O. sbp=%p flags=%x", sbp,
3486                     sbp->pkt_flags);
3487                 return (FC_FAILURE);
3488         }
3489 
3490         sbp->pkt_flags |= PACKET_POLLED;
3491         sbp->pkt_flags |= PACKET_IN_ABORT;
3492 
3493         if (sbp->pkt_flags & (PACKET_IN_COMPLETION | PACKET_IN_FLUSH |
3494             PACKET_IN_TIMEOUT)) {
3495                 mutex_exit(&sbp->mtx);
3496 
3497                 /* Do nothing, pkt already on its way out */
3498                 goto done;
3499         }
3500 
3501         mutex_exit(&sbp->mtx);
3502 
3503 begin:
3504         pass++;
3505 
3506         mutex_enter(&EMLXS_TX_CHANNEL_LOCK);
3507 
3508         if (sbp->pkt_flags & PACKET_IN_TXQ) {
3509                 /* Find it on the queue */
3510                 found = 0;
3511                 if (iocbq->flag & IOCB_PRIORITY) {
3512                         /* Search the priority queue */
3513                         prev = NULL;
3514                         next = (IOCBQ *) nlp->nlp_ptx[channelno].q_first;
3515 
3516                         while (next) {
3517                                 if (next == iocbq) {
3518                                         /* Remove it */
3519                                         if (prev) {
3520                                                 prev->next = iocbq->next;
3521                                         }
3522 
3523                                         if (nlp->nlp_ptx[channelno].q_last ==
3524                                             (void *)iocbq) {
3525                                                 nlp->nlp_ptx[channelno].q_last =
3526                                                     (void *)prev;
3527                                         }
3528 
3529                                         if (nlp->nlp_ptx[channelno].q_first ==
3530                                             (void *)iocbq) {
3531                                                 nlp->nlp_ptx[channelno].
3532                                                     q_first =
3533                                                     (void *)iocbq->next;
3534                                         }
3535 
3536                                         nlp->nlp_ptx[channelno].q_cnt--;
3537                                         iocbq->next = NULL;
3538                                         found = 1;
3539                                         break;
3540                                 }
3541 
3542                                 prev = next;
3543                                 next = next->next;
3544                         }
3545                 } else {
3546                         /* Search the normal queue */
3547                         prev = NULL;
3548                         next = (IOCBQ *) nlp->nlp_tx[channelno].q_first;
3549 
3550                         while (next) {
3551                                 if (next == iocbq) {
3552                                         /* Remove it */
3553                                         if (prev) {
3554                                                 prev->next = iocbq->next;
3555                                         }
3556 
3557                                         if (nlp->nlp_tx[channelno].q_last ==
3558                                             (void *)iocbq) {
3559                                                 nlp->nlp_tx[channelno].q_last =
3560                                                     (void *)prev;
3561                                         }
3562 
3563                                         if (nlp->nlp_tx[channelno].q_first ==
3564                                             (void *)iocbq) {
3565                                                 nlp->nlp_tx[channelno].q_first =
3566                                                     (void *)iocbq->next;
3567                                         }
3568 
3569                                         nlp->nlp_tx[channelno].q_cnt--;
3570                                         iocbq->next = NULL;
3571                                         found = 1;
3572                                         break;
3573                                 }
3574 
3575                                 prev = next;
3576                                 next = (IOCBQ *) next->next;
3577                         }
3578                 }
3579 
3580                 if (!found) {
3581                         mutex_exit(&EMLXS_TX_CHANNEL_LOCK);
3582                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_abort_failed_msg,
3583                             "I/O not found in driver. sbp=%p flags=%x", sbp,
3584                             sbp->pkt_flags);
3585                         goto done;
3586                 }
3587 
3588                 /* Check if node still needs servicing */
3589                 if ((nlp->nlp_ptx[channelno].q_first) ||
3590                     (nlp->nlp_tx[channelno].q_first &&
3591                     !(nlp->nlp_flag[channelno] & NLP_CLOSED))) {
3592 
3593                         /*
3594                          * If this is the base node,
3595                          * then don't shift the pointers
3596                          */
3597                         /* We want to drain the base node before moving on */
3598                         if (!nlp->nlp_base) {
3599                                 /* Just shift channel queue */
3600                                 /* pointers to next node */
3601                                 cp->nodeq.q_last = (void *) nlp;
3602                                 cp->nodeq.q_first = nlp->nlp_next[channelno];
3603                         }
3604                 } else {
3605                         /* Remove node from channel queue */
3606 
3607                         /* If this is the only node on list */
3608                         if (cp->nodeq.q_first == (void *)nlp &&
3609                             cp->nodeq.q_last == (void *)nlp) {
3610                                 cp->nodeq.q_last = NULL;
3611                                 cp->nodeq.q_first = NULL;
3612                                 cp->nodeq.q_cnt = 0;
3613                         } else if (cp->nodeq.q_first == (void *)nlp) {
3614                                 cp->nodeq.q_first = nlp->nlp_next[channelno];
3615                                 ((NODELIST *) cp->nodeq.q_last)->
3616                                     nlp_next[channelno] = cp->nodeq.q_first;
3617                                 cp->nodeq.q_cnt--;
3618                         } else {
3619                                 /*
3620                                  * This is a little more difficult find the
3621                                  * previous node in the circular channel queue
3622                                  */
3623                                 prev_nlp = nlp;
3624                                 while (prev_nlp->nlp_next[channelno] != nlp) {
3625                                         prev_nlp = prev_nlp->
3626                                             nlp_next[channelno];
3627                                 }
3628 
3629                                 prev_nlp->nlp_next[channelno] =
3630                                     nlp->nlp_next[channelno];
3631 
3632                                 if (cp->nodeq.q_last == (void *)nlp) {
3633                                         cp->nodeq.q_last = (void *)prev_nlp;
3634                                 }
3635                                 cp->nodeq.q_cnt--;
3636 
3637                         }
3638 
3639                         /* Clear node */
3640                         nlp->nlp_next[channelno] = NULL;
3641                 }
3642 
3643                 /* Free the ULPIOTAG and the bmp */
3644                 if (hba->sli_mode == EMLXS_HBA_SLI4_MODE) {
3645                         emlxs_sli4_free_xri(port, sbp, sbp->xrip, 1);
3646                 } else {
3647                         (void) emlxs_unregister_pkt(cp, sbp->iotag, 1);
3648                 }
3649 
3650 
3651                 mutex_exit(&EMLXS_TX_CHANNEL_LOCK);
3652 
3653                 emlxs_pkt_complete(sbp, IOSTAT_LOCAL_REJECT,
3654                     IOERR_ABORT_REQUESTED, 1);
3655 
3656                 goto done;
3657         }
3658 
3659         mutex_exit(&EMLXS_TX_CHANNEL_LOCK);
3660 
3661 
3662         /* Check the chip queue */
3663         mutex_enter(&EMLXS_FCTAB_LOCK);
3664 
3665         if ((sbp->pkt_flags & PACKET_IN_CHIPQ) &&
3666             !(sbp->pkt_flags & PACKET_XRI_CLOSED) &&
3667             (sbp == hba->fc_table[sbp->iotag])) {
3668 
3669                 /* Create the abort IOCB */
3670                 if (hba->state >= FC_LINK_UP) {
3671                         iocbq =
3672                             emlxs_create_abort_xri_cn(port, sbp->node,
3673                             sbp->iotag, cp, sbp->class, ABORT_TYPE_ABTS);
3674 
3675                         mutex_enter(&sbp->mtx);
3676                         sbp->pkt_flags |= PACKET_XRI_CLOSED;
3677                         sbp->ticks =
3678                             hba->timer_tics + (4 * hba->fc_ratov) + 10;
3679                         sbp->abort_attempts++;
3680                         mutex_exit(&sbp->mtx);
3681                 } else {
3682                         iocbq =
3683                             emlxs_create_close_xri_cn(port, sbp->node,
3684                             sbp->iotag, cp);
3685 
3686                         mutex_enter(&sbp->mtx);
3687                         sbp->pkt_flags |= PACKET_XRI_CLOSED;
3688                         sbp->ticks = hba->timer_tics + 30;
3689                         sbp->abort_attempts++;
3690                         mutex_exit(&sbp->mtx);
3691                 }
3692 
3693                 mutex_exit(&EMLXS_FCTAB_LOCK);
3694 
3695                 /* Send this iocbq */
3696                 if (iocbq) {
3697                         EMLXS_SLI_ISSUE_IOCB_CMD(hba, cp, iocbq);
3698                         iocbq = NULL;
3699                 }
3700 
3701                 goto done;
3702         }
3703 
3704         mutex_exit(&EMLXS_FCTAB_LOCK);
3705 
3706         /* Pkt was not on any queues */
3707 
3708         /* Check again if we still own this */
3709         if (!(sbp->pkt_flags & PACKET_VALID) ||
3710             (sbp->pkt_flags &
3711             (PACKET_ULP_OWNED | PACKET_IN_COMPLETION |
3712             PACKET_IN_FLUSH | PACKET_IN_TIMEOUT))) {
3713                 goto done;
3714         }
3715 
3716         if (!sleep) {
3717                 return (FC_FAILURE);
3718         }
3719 
3720         /* Apparently the pkt was not found.  Let's delay and try again */
3721         if (pass < 5) {
3722                 delay(drv_usectohz(5000000));   /* 5 seconds */
3723 
3724                 /* Check again if we still own this */
3725                 if (!(sbp->pkt_flags & PACKET_VALID) ||
3726                     (sbp->pkt_flags &
3727                     (PACKET_ULP_OWNED | PACKET_IN_COMPLETION |
3728                     PACKET_IN_FLUSH | PACKET_IN_TIMEOUT))) {
3729                         goto done;
3730                 }
3731 
3732                 goto begin;
3733         }
3734 
3735 force_it:
3736 
3737         /* Force the completion now */
3738         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3739             "Abort: Completing an IO thats not outstanding: %x", sbp->iotag);
3740 
3741         /* Now complete it */
3742         emlxs_pkt_complete(sbp, IOSTAT_LOCAL_REJECT, IOERR_ABORT_REQUESTED,
3743             1);
3744 
3745 done:
3746 
3747         /* Now wait for the pkt to complete */
3748         if (!(sbp->pkt_flags & PACKET_COMPLETED)) {
3749                 /* Set thread timeout */
3750                 pkt_timeout = emlxs_timeout(hba, 30);
3751 
3752                 /* Check for panic situation */
3753                 if (ddi_in_panic()) {
3754 
3755                         /*
3756                          * In panic situations there will be one thread with no
3757                          * interrrupts (hard or soft) and no timers
3758                          */
3759 
3760                         /*
3761                          * We must manually poll everything in this thread
3762                          * to keep the driver going.
3763                          */
3764 
3765                         /* Keep polling the chip until our IO is completed */
3766                         (void) drv_getparm(LBOLT, &time);
3767                         timer = time + drv_usectohz(1000000);
3768                         while ((time < pkt_timeout) &&
3769                             !(sbp->pkt_flags & PACKET_COMPLETED)) {
3770                                 EMLXS_SLI_POLL_INTR(hba);
3771                                 (void) drv_getparm(LBOLT, &time);
3772 
3773                                 /* Trigger timer checks periodically */
3774                                 if (time >= timer) {
3775                                         emlxs_timer_checks(hba);
3776                                         timer = time + drv_usectohz(1000000);
3777                                 }
3778                         }
3779                 } else {
3780                         /* Wait for IO completion or pkt_timeout */
3781                         mutex_enter(&EMLXS_PKT_LOCK);
3782                         pkt_ret = 0;
3783                         while ((pkt_ret != -1) &&
3784                             !(sbp->pkt_flags & PACKET_COMPLETED)) {
3785                                 pkt_ret =
3786                                     cv_timedwait(&EMLXS_PKT_CV,
3787                                     &EMLXS_PKT_LOCK, pkt_timeout);
3788                         }
3789                         mutex_exit(&EMLXS_PKT_LOCK);
3790                 }
3791 
3792                 /* Check if pkt_timeout occured. This is not good. */
3793                 /* Something happened to our IO. */
3794                 if (!(sbp->pkt_flags & PACKET_COMPLETED)) {
3795                         /* Force the completion now */
3796                         goto force_it;
3797                 }
3798         }
3799 #if (EMLXS_MODREVX == EMLXS_MODREV2X)
3800         emlxs_unswap_pkt(sbp);
3801 #endif  /* EMLXS_MODREV2X */
3802 
3803         /* Check again if we still own this */
3804         if ((sbp->pkt_flags & PACKET_VALID) &&
3805             !(sbp->pkt_flags & PACKET_ULP_OWNED)) {
3806                 mutex_enter(&sbp->mtx);
3807                 if ((sbp->pkt_flags & PACKET_VALID) &&
3808                     !(sbp->pkt_flags & PACKET_ULP_OWNED)) {
3809                         sbp->pkt_flags |= PACKET_ULP_OWNED;
3810                 }
3811                 mutex_exit(&sbp->mtx);
3812         }
3813 
3814 #ifdef ULP_PATCH5
3815         if (cfg[CFG_ENABLE_PATCH].current & ULP_PATCH5) {
3816                 return (FC_FAILURE);
3817         }
3818 #endif /* ULP_PATCH5 */
3819 
3820         return (FC_SUCCESS);
3821 
3822 } /* emlxs_fca_pkt_abort() */
3823 
3824 
3825 static void
3826 emlxs_abort_all(emlxs_hba_t *hba, uint32_t *tx, uint32_t *chip)
3827 {
3828         emlxs_port_t   *port = &PPORT;
3829         fc_packet_t *pkt;
3830         emlxs_buf_t *sbp;
3831         uint32_t i;
3832         uint32_t flg;
3833         uint32_t rc;
3834         uint32_t txcnt;
3835         uint32_t chipcnt;
3836 
3837         txcnt = 0;
3838         chipcnt = 0;
3839 
3840         mutex_enter(&EMLXS_FCTAB_LOCK);
3841         for (i = 0; i < hba->max_iotag; i++) {
3842                 sbp = hba->fc_table[i];
3843                 if (sbp == NULL || sbp == STALE_PACKET) {
3844                         continue;
3845                 }
3846                 flg =  (sbp->pkt_flags & PACKET_IN_CHIPQ);
3847                 pkt = PRIV2PKT(sbp);
3848                 mutex_exit(&EMLXS_FCTAB_LOCK);
3849                 rc = emlxs_fca_pkt_abort(port, pkt, 0);
3850                 if (rc == FC_SUCCESS) {
3851                         if (flg) {
3852                                 chipcnt++;
3853                         } else {
3854                                 txcnt++;
3855                         }
3856                 }
3857                 mutex_enter(&EMLXS_FCTAB_LOCK);
3858         }
3859         mutex_exit(&EMLXS_FCTAB_LOCK);
3860         *tx = txcnt;
3861         *chip = chipcnt;
3862 } /* emlxs_abort_all() */
3863 
3864 
3865 extern int32_t
3866 emlxs_reset(emlxs_port_t *port, uint32_t cmd)
3867 {
3868         emlxs_hba_t     *hba = HBA;
3869         int             rval;
3870         int             i = 0;
3871         int             ret;
3872         clock_t         timeout;
3873 
3874         switch (cmd) {
3875         case FC_FCA_LINK_RESET:
3876 
3877                 mutex_enter(&EMLXS_PORT_LOCK);
3878                 if (!(hba->flag & FC_ONLINE_MODE) ||
3879                     (hba->state <= FC_LINK_DOWN)) {
3880                         mutex_exit(&EMLXS_PORT_LOCK);
3881                         return (FC_SUCCESS);
3882                 }
3883 
3884                 if (hba->reset_state &
3885                     (FC_LINK_RESET_INP | FC_PORT_RESET_INP)) {
3886                         mutex_exit(&EMLXS_PORT_LOCK);
3887                         return (FC_FAILURE);
3888                 }
3889 
3890                 hba->reset_state |= FC_LINK_RESET_INP;
3891                 hba->reset_request |= FC_LINK_RESET;
3892                 mutex_exit(&EMLXS_PORT_LOCK);
3893 
3894                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3895                     "Resetting Link.");
3896 
3897                 mutex_enter(&EMLXS_LINKUP_LOCK);
3898                 hba->linkup_wait_flag = TRUE;
3899                 mutex_exit(&EMLXS_LINKUP_LOCK);
3900 
3901                 if (emlxs_reset_link(hba, 1, 1)) {
3902                         mutex_enter(&EMLXS_LINKUP_LOCK);
3903                         hba->linkup_wait_flag = FALSE;
3904                         mutex_exit(&EMLXS_LINKUP_LOCK);
3905 
3906                         mutex_enter(&EMLXS_PORT_LOCK);
3907                         hba->reset_state &= ~FC_LINK_RESET_INP;
3908                         hba->reset_request &= ~FC_LINK_RESET;
3909                         mutex_exit(&EMLXS_PORT_LOCK);
3910 
3911                         return (FC_FAILURE);
3912                 }
3913 
3914                 mutex_enter(&EMLXS_LINKUP_LOCK);
3915                 timeout = emlxs_timeout(hba, 60);
3916                 ret = 0;
3917                 while ((ret != -1) && (hba->linkup_wait_flag == TRUE)) {
3918                         ret =
3919                             cv_timedwait(&EMLXS_LINKUP_CV, &EMLXS_LINKUP_LOCK,
3920                             timeout);
3921                 }
3922 
3923                 hba->linkup_wait_flag = FALSE;
3924                 mutex_exit(&EMLXS_LINKUP_LOCK);
3925 
3926                 mutex_enter(&EMLXS_PORT_LOCK);
3927                 hba->reset_state &= ~FC_LINK_RESET_INP;
3928                 hba->reset_request &= ~FC_LINK_RESET;
3929                 mutex_exit(&EMLXS_PORT_LOCK);
3930 
3931                 if (ret == -1) {
3932                         return (FC_FAILURE);
3933                 }
3934 
3935                 return (FC_SUCCESS);
3936 
3937         case FC_FCA_CORE:
3938 #ifdef DUMP_SUPPORT
3939                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3940                     "Dumping Core.");
3941 
3942                 /* Schedule a USER dump */
3943                 emlxs_dump(hba, EMLXS_USER_DUMP, 0, 0);
3944 
3945                 /* Wait for dump to complete */
3946                 emlxs_dump_wait(hba);
3947 
3948                 return (FC_SUCCESS);
3949 #endif /* DUMP_SUPPORT */
3950 
3951         case FC_FCA_RESET:
3952         case FC_FCA_RESET_CORE:
3953 
3954                 mutex_enter(&EMLXS_PORT_LOCK);
3955                 if (hba->reset_state & FC_PORT_RESET_INP) {
3956                         mutex_exit(&EMLXS_PORT_LOCK);
3957                         return (FC_FAILURE);
3958                 }
3959 
3960                 hba->reset_state |= FC_PORT_RESET_INP;
3961                 hba->reset_request |= (FC_PORT_RESET | FC_LINK_RESET);
3962 
3963                 /* wait for any pending link resets to complete */
3964                 while ((hba->reset_state & FC_LINK_RESET_INP) &&
3965                     (i++ < 1000)) {
3966                         mutex_exit(&EMLXS_PORT_LOCK);
3967                         delay(drv_usectohz(1000));
3968                         mutex_enter(&EMLXS_PORT_LOCK);
3969                 }
3970 
3971                 if (hba->reset_state & FC_LINK_RESET_INP) {
3972                         hba->reset_state &= ~FC_PORT_RESET_INP;
3973                         hba->reset_request &= ~(FC_PORT_RESET | FC_LINK_RESET);
3974                         mutex_exit(&EMLXS_PORT_LOCK);
3975                         return (FC_FAILURE);
3976                 }
3977                 mutex_exit(&EMLXS_PORT_LOCK);
3978 
3979                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3980                     "Resetting Adapter.");
3981 
3982                 rval = FC_SUCCESS;
3983 
3984                 if (emlxs_offline(hba, 0) == 0) {
3985                         (void) emlxs_online(hba);
3986                 } else {
3987                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
3988                             "Adapter reset failed. Device busy.");
3989 
3990                         rval = FC_DEVICE_BUSY;
3991                 }
3992 
3993                 mutex_enter(&EMLXS_PORT_LOCK);
3994                 hba->reset_state &= ~FC_PORT_RESET_INP;
3995                 hba->reset_request &= ~(FC_PORT_RESET | FC_LINK_RESET);
3996                 mutex_exit(&EMLXS_PORT_LOCK);
3997 
3998                 return (rval);
3999 
4000         case EMLXS_DFC_RESET_ALL:
4001         case EMLXS_DFC_RESET_ALL_FORCE_DUMP:
4002 
4003                 mutex_enter(&EMLXS_PORT_LOCK);
4004                 if (hba->reset_state & FC_PORT_RESET_INP) {
4005                         mutex_exit(&EMLXS_PORT_LOCK);
4006                         return (FC_FAILURE);
4007                 }
4008 
4009                 hba->reset_state |= FC_PORT_RESET_INP;
4010                 hba->reset_request |= (FC_PORT_RESET | FC_LINK_RESET);
4011 
4012                 /* wait for any pending link resets to complete */
4013                 while ((hba->reset_state & FC_LINK_RESET_INP) &&
4014                     (i++ < 1000)) {
4015                         mutex_exit(&EMLXS_PORT_LOCK);
4016                         delay(drv_usectohz(1000));
4017                         mutex_enter(&EMLXS_PORT_LOCK);
4018                 }
4019 
4020                 if (hba->reset_state & FC_LINK_RESET_INP) {
4021                         hba->reset_state &= ~FC_PORT_RESET_INP;
4022                         hba->reset_request &= ~(FC_PORT_RESET | FC_LINK_RESET);
4023                         mutex_exit(&EMLXS_PORT_LOCK);
4024                         return (FC_FAILURE);
4025                 }
4026                 mutex_exit(&EMLXS_PORT_LOCK);
4027 
4028                 rval = FC_SUCCESS;
4029 
4030                 if (cmd == EMLXS_DFC_RESET_ALL) {
4031                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4032                             "Resetting Adapter (All Firmware Reset).");
4033 
4034                         emlxs_sli4_hba_reset_all(hba, 0);
4035                 } else {
4036                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4037                             "Resetting Adapter "
4038                             "(All Firmware Reset, Force Dump).");
4039 
4040                         emlxs_sli4_hba_reset_all(hba, 1);
4041                 }
4042 
4043                 mutex_enter(&EMLXS_PORT_LOCK);
4044                 hba->reset_state &= ~FC_PORT_RESET_INP;
4045                 hba->reset_request &= ~(FC_PORT_RESET | FC_LINK_RESET);
4046                 mutex_exit(&EMLXS_PORT_LOCK);
4047 
4048                 /* Wait for the timer thread to detect the error condition */
4049                 delay(drv_usectohz(1000000));
4050 
4051                 /* Wait for the HBA to re-initialize */
4052                 i = 0;
4053                 mutex_enter(&EMLXS_PORT_LOCK);
4054                 while (!(hba->flag & FC_ONLINE_MODE) && (i++ < 30)) {
4055                         mutex_exit(&EMLXS_PORT_LOCK);
4056                         delay(drv_usectohz(1000000));
4057                         mutex_enter(&EMLXS_PORT_LOCK);
4058                 }
4059 
4060                 if (!(hba->flag & FC_ONLINE_MODE)) {
4061                         rval = FC_FAILURE;
4062                 }
4063 
4064                 mutex_exit(&EMLXS_PORT_LOCK);
4065 
4066                 return (rval);
4067 
4068         default:
4069                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4070                     "reset: Unknown command. cmd=%x", cmd);
4071 
4072                 break;
4073         }
4074 
4075         return (FC_FAILURE);
4076 
4077 } /* emlxs_reset() */
4078 
4079 
4080 extern int32_t
4081 emlxs_fca_reset(opaque_t fca_port_handle, uint32_t cmd)
4082 {
4083         emlxs_port_t    *port = (emlxs_port_t *)fca_port_handle;
4084         emlxs_hba_t     *hba = HBA;
4085         int32_t         rval;
4086 
4087         if (port->mode != MODE_INITIATOR) {
4088                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4089                     "fca_reset failed. Port is not in initiator mode.");
4090 
4091                 return (FC_FAILURE);
4092         }
4093 
4094         if (!(port->flag & EMLXS_INI_BOUND)) {
4095                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4096                     "fca_reset: Port not bound.");
4097 
4098                 return (FC_UNBOUND);
4099         }
4100 
4101         switch (cmd) {
4102         case FC_FCA_LINK_RESET:
4103                 if (hba->fw_flag & FW_UPDATE_NEEDED) {
4104                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4105                             "fca_reset: FC_FCA_LINK_RESET -> FC_FCA_RESET");
4106                         cmd = FC_FCA_RESET;
4107                 } else {
4108                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4109                             "fca_reset: FC_FCA_LINK_RESET");
4110                 }
4111                 break;
4112 
4113         case FC_FCA_CORE:
4114                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4115                     "fca_reset: FC_FCA_CORE");
4116                 break;
4117 
4118         case FC_FCA_RESET:
4119                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4120                     "fca_reset: FC_FCA_RESET");
4121                 break;
4122 
4123         case FC_FCA_RESET_CORE:
4124                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4125                     "fca_reset: FC_FCA_RESET_CORE");
4126                 break;
4127 
4128         default:
4129                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4130                     "fca_reset: Unknown command. cmd=%x", cmd);
4131                 return (FC_FAILURE);
4132         }
4133 
4134         if (hba->fw_flag & FW_UPDATE_NEEDED) {
4135                 hba->fw_flag |= FW_UPDATE_KERNEL;
4136         }
4137 
4138         rval = emlxs_reset(port, cmd);
4139 
4140         return (rval);
4141 
4142 } /* emlxs_fca_reset() */
4143 
4144 
4145 extern int
4146 emlxs_fca_port_manage(opaque_t fca_port_handle, fc_fca_pm_t *pm)
4147 {
4148         emlxs_port_t    *port = (emlxs_port_t *)fca_port_handle;
4149         emlxs_hba_t     *hba = HBA;
4150         int32_t         ret;
4151         emlxs_vpd_t     *vpd = &VPD;
4152 
4153         ret = FC_SUCCESS;
4154 
4155 #ifdef IDLE_TIMER
4156         emlxs_pm_busy_component(hba);
4157 #endif  /* IDLE_TIMER */
4158 
4159         switch (pm->pm_cmd_code) {
4160 
4161         case FC_PORT_GET_FW_REV:
4162         {
4163                 char buffer[128];
4164 
4165                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4166                     "fca_port_manage: FC_PORT_GET_FW_REV");
4167 
4168                 (void) snprintf(buffer, (sizeof (buffer)-1),
4169                     "%s %s", hba->model_info.model,
4170                     vpd->fw_version);
4171                 bzero(pm->pm_data_buf, pm->pm_data_len);
4172 
4173                 if (pm->pm_data_len < strlen(buffer) + 1) {
4174                         ret = FC_NOMEM;
4175 
4176                         break;
4177                 }
4178 
4179                 (void) strncpy(pm->pm_data_buf, buffer,
4180                     (pm->pm_data_len-1));
4181                 break;
4182         }
4183 
4184         case FC_PORT_GET_FCODE_REV:
4185         {
4186                 char buffer[128];
4187 
4188                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4189                     "fca_port_manage: FC_PORT_GET_FCODE_REV");
4190 
4191                 /* Force update here just to be sure */
4192                 emlxs_get_fcode_version(hba);
4193 
4194                 (void) snprintf(buffer, (sizeof (buffer)-1),
4195                     "%s %s", hba->model_info.model,
4196                     vpd->fcode_version);
4197                 bzero(pm->pm_data_buf, pm->pm_data_len);
4198 
4199                 if (pm->pm_data_len < strlen(buffer) + 1) {
4200                         ret = FC_NOMEM;
4201                         break;
4202                 }
4203 
4204                 (void) strncpy(pm->pm_data_buf, buffer,
4205                     (pm->pm_data_len-1));
4206                 break;
4207         }
4208 
4209         case FC_PORT_GET_DUMP_SIZE:
4210         {
4211 #ifdef DUMP_SUPPORT
4212                 uint32_t dump_size = 0;
4213 
4214                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4215                     "fca_port_manage: FC_PORT_GET_DUMP_SIZE");
4216 
4217                 if (pm->pm_data_len < sizeof (uint32_t)) {
4218                         ret = FC_NOMEM;
4219                         break;
4220                 }
4221 
4222                 (void) emlxs_get_dump(hba, NULL, &dump_size);
4223 
4224                 *((uint32_t *)pm->pm_data_buf) = dump_size;
4225 
4226 #else
4227                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4228                     "fca_port_manage: FC_PORT_GET_DUMP_SIZE unsupported.");
4229 
4230 #endif /* DUMP_SUPPORT */
4231 
4232                 break;
4233         }
4234 
4235         case FC_PORT_GET_DUMP:
4236         {
4237 #ifdef DUMP_SUPPORT
4238                 uint32_t dump_size = 0;
4239 
4240                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4241                     "fca_port_manage: FC_PORT_GET_DUMP");
4242 
4243                 (void) emlxs_get_dump(hba, NULL, &dump_size);
4244 
4245                 if (pm->pm_data_len < dump_size) {
4246                         ret = FC_NOMEM;
4247                         break;
4248                 }
4249 
4250                 (void) emlxs_get_dump(hba, (uint8_t *)pm->pm_data_buf,
4251                     (uint32_t *)&dump_size);
4252 #else
4253                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4254                     "fca_port_manage: FC_PORT_GET_DUMP unsupported.");
4255 
4256 #endif /* DUMP_SUPPORT */
4257 
4258                 break;
4259         }
4260 
4261         case FC_PORT_FORCE_DUMP:
4262         {
4263 #ifdef DUMP_SUPPORT
4264                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4265                     "fca_port_manage: FC_PORT_FORCE_DUMP");
4266 
4267                 /* Schedule a USER dump */
4268                 emlxs_dump(hba, EMLXS_USER_DUMP, 0, 0);
4269 
4270                 /* Wait for dump to complete */
4271                 emlxs_dump_wait(hba);
4272 #else
4273                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4274                     "fca_port_manage: FC_PORT_FORCE_DUMP unsupported.");
4275 
4276 #endif /* DUMP_SUPPORT */
4277                 break;
4278         }
4279 
4280         case FC_PORT_LINK_STATE:
4281         {
4282                 uint32_t        *link_state;
4283 
4284                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4285                     "fca_port_manage: FC_PORT_LINK_STATE");
4286 
4287                 if (pm->pm_stat_len != sizeof (*link_state)) {
4288                         ret = FC_NOMEM;
4289                         break;
4290                 }
4291 
4292                 if (pm->pm_cmd_buf != NULL) {
4293                         /*
4294                          * Can't look beyond the FCA port.
4295                          */
4296                         ret = FC_INVALID_REQUEST;
4297                         break;
4298                 }
4299 
4300                 link_state = (uint32_t *)pm->pm_stat_buf;
4301 
4302                 /* Set the state */
4303                 if (hba->state >= FC_LINK_UP) {
4304                         /* Check for loop topology */
4305                         if (hba->topology == TOPOLOGY_LOOP) {
4306                                 *link_state = FC_STATE_LOOP;
4307                         } else {
4308                                 *link_state = FC_STATE_ONLINE;
4309                         }
4310 
4311                         /* Set the link speed */
4312                         switch (hba->linkspeed) {
4313                         case LA_2GHZ_LINK:
4314                                 *link_state |= FC_STATE_2GBIT_SPEED;
4315                                 break;
4316                         case LA_4GHZ_LINK:
4317                                 *link_state |= FC_STATE_4GBIT_SPEED;
4318                                 break;
4319                         case LA_8GHZ_LINK:
4320                                 *link_state |= FC_STATE_8GBIT_SPEED;
4321                                 break;
4322                         case LA_10GHZ_LINK:
4323                                 *link_state |= FC_STATE_10GBIT_SPEED;
4324                                 break;
4325                         case LA_16GHZ_LINK:
4326                                 *link_state |= FC_STATE_16GBIT_SPEED;
4327                                 break;
4328                         case LA_1GHZ_LINK:
4329                         default:
4330                                 *link_state |= FC_STATE_1GBIT_SPEED;
4331                                 break;
4332                         }
4333                 } else {
4334                         *link_state = FC_STATE_OFFLINE;
4335                 }
4336 
4337                 break;
4338         }
4339 
4340 
4341         case FC_PORT_ERR_STATS:
4342         case FC_PORT_RLS:
4343         {
4344                 MAILBOXQ        *mbq;
4345                 MAILBOX         *mb;
4346                 fc_rls_acc_t    *bp;
4347 
4348                 if (!(hba->flag & FC_ONLINE_MODE)) {
4349                         return (FC_OFFLINE);
4350                 }
4351                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4352                     "fca_port_manage: FC_PORT_RLS / FC_PORT_ERR_STATS");
4353 
4354                 if (pm->pm_data_len < sizeof (fc_rls_acc_t)) {
4355                         ret = FC_NOMEM;
4356                         break;
4357                 }
4358 
4359                 if ((mbq = (MAILBOXQ *)emlxs_mem_get(hba,
4360                     MEM_MBOX)) == 0) {
4361                         ret = FC_NOMEM;
4362                         break;
4363                 }
4364                 mb = (MAILBOX *)mbq;
4365 
4366                 emlxs_mb_read_lnk_stat(hba, mbq);
4367                 if (EMLXS_SLI_ISSUE_MBOX_CMD(hba, mbq, MBX_WAIT, 0)
4368                     != MBX_SUCCESS) {
4369                         ret = FC_PBUSY;
4370                 } else {
4371                         bp = (fc_rls_acc_t *)pm->pm_data_buf;
4372 
4373                         bp->rls_link_fail = mb->un.varRdLnk.linkFailureCnt;
4374                         bp->rls_sync_loss = mb->un.varRdLnk.lossSyncCnt;
4375                         bp->rls_sig_loss = mb->un.varRdLnk.lossSignalCnt;
4376                         bp->rls_prim_seq_err = mb->un.varRdLnk.primSeqErrCnt;
4377                         bp->rls_invalid_word =
4378                             mb->un.varRdLnk.invalidXmitWord;
4379                         bp->rls_invalid_crc = mb->un.varRdLnk.crcCnt;
4380                 }
4381 
4382                 emlxs_mem_put(hba, MEM_MBOX, (void *)mbq);
4383                 break;
4384         }
4385 
4386         case FC_PORT_DOWNLOAD_FW:
4387                 if (!(hba->flag & FC_ONLINE_MODE)) {
4388                         return (FC_OFFLINE);
4389                 }
4390                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4391                     "fca_port_manage: FC_PORT_DOWNLOAD_FW");
4392                 ret = emlxs_fw_download(hba, pm->pm_data_buf,
4393                     pm->pm_data_len, 1);
4394                 break;
4395 
4396         case FC_PORT_DOWNLOAD_FCODE:
4397                 if (!(hba->flag & FC_ONLINE_MODE)) {
4398                         return (FC_OFFLINE);
4399                 }
4400                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4401                     "fca_port_manage: FC_PORT_DOWNLOAD_FCODE");
4402                 ret = emlxs_fw_download(hba, pm->pm_data_buf,
4403                     pm->pm_data_len, 1);
4404                 break;
4405 
4406         case FC_PORT_DIAG:
4407         {
4408                 uint32_t errno = 0;
4409                 uint32_t did = 0;
4410                 uint32_t pattern = 0;
4411 
4412                 switch (pm->pm_cmd_flags) {
4413                 case EMLXS_DIAG_BIU:
4414 
4415                         if (!(hba->flag & FC_ONLINE_MODE)) {
4416                                 return (FC_OFFLINE);
4417                         }
4418                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4419                             "fca_port_manage: DIAG_BIU");
4420 
4421                         if (pm->pm_data_len) {
4422                                 pattern = *((uint32_t *)pm->pm_data_buf);
4423                         }
4424 
4425                         errno = emlxs_diag_biu_run(hba, pattern);
4426 
4427                         if (pm->pm_stat_len == sizeof (errno)) {
4428                                 *(int *)pm->pm_stat_buf = errno;
4429                         }
4430 
4431                         break;
4432 
4433 
4434                 case EMLXS_DIAG_POST:
4435 
4436                         if (!(hba->flag & FC_ONLINE_MODE)) {
4437                                 return (FC_OFFLINE);
4438                         }
4439                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4440                             "fca_port_manage: DIAG_POST");
4441 
4442                         errno = emlxs_diag_post_run(hba);
4443 
4444                         if (pm->pm_stat_len == sizeof (errno)) {
4445                                 *(int *)pm->pm_stat_buf = errno;
4446                         }
4447 
4448                         break;
4449 
4450 
4451                 case EMLXS_DIAG_ECHO:
4452 
4453                         if (!(hba->flag & FC_ONLINE_MODE)) {
4454                                 return (FC_OFFLINE);
4455                         }
4456                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4457                             "fca_port_manage: DIAG_ECHO");
4458 
4459                         if (pm->pm_cmd_len != sizeof (uint32_t)) {
4460                                 ret = FC_INVALID_REQUEST;
4461                                 break;
4462                         }
4463 
4464                         did = *((uint32_t *)pm->pm_cmd_buf);
4465 
4466                         if (pm->pm_data_len) {
4467                                 pattern = *((uint32_t *)pm->pm_data_buf);
4468                         }
4469 
4470                         errno = emlxs_diag_echo_run(port, did, pattern);
4471 
4472                         if (pm->pm_stat_len == sizeof (errno)) {
4473                                 *(int *)pm->pm_stat_buf = errno;
4474                         }
4475 
4476                         break;
4477 
4478 
4479                 case EMLXS_PARM_GET_NUM:
4480                 {
4481                         uint32_t        *num;
4482                         emlxs_config_t  *cfg;
4483                         uint32_t        i;
4484                         uint32_t        count;
4485                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4486                             "fca_port_manage: PARM_GET_NUM");
4487 
4488                         if (pm->pm_stat_len < sizeof (uint32_t)) {
4489                                 ret = FC_NOMEM;
4490                                 break;
4491                         }
4492 
4493                         num = (uint32_t *)pm->pm_stat_buf;
4494                         count = 0;
4495                         cfg = &CFG;
4496                         for (i = 0; i < NUM_CFG_PARAM; i++, cfg++) {
4497                                 if (!(cfg->flags & PARM_HIDDEN)) {
4498                                         count++;
4499                                 }
4500 
4501                         }
4502 
4503                         *num = count;
4504 
4505                         break;
4506                 }
4507 
4508                 case EMLXS_PARM_GET_LIST:
4509                 {
4510                         emlxs_parm_t    *parm;
4511                         emlxs_config_t  *cfg;
4512                         uint32_t        i;
4513                         uint32_t        max_count;
4514 
4515                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4516                             "fca_port_manage: PARM_GET_LIST");
4517 
4518                         if (pm->pm_stat_len < sizeof (emlxs_parm_t)) {
4519                                 ret = FC_NOMEM;
4520                                 break;
4521                         }
4522 
4523                         max_count = pm->pm_stat_len / sizeof (emlxs_parm_t);
4524 
4525                         parm = (emlxs_parm_t *)pm->pm_stat_buf;
4526                         cfg = &CFG;
4527                         for (i = 0; i < NUM_CFG_PARAM && max_count; i++,
4528                             cfg++) {
4529                                 if (!(cfg->flags & PARM_HIDDEN)) {
4530                                         (void) strncpy(parm->label, cfg->string,
4531                                             (sizeof (parm->label)-1));
4532                                         parm->min = cfg->low;
4533                                         parm->max = cfg->hi;
4534                                         parm->def = cfg->def;
4535                                         parm->current = cfg->current;
4536                                         parm->flags = cfg->flags;
4537                                         (void) strncpy(parm->help, cfg->help,
4538                                             (sizeof (parm->help)-1));
4539                                         parm++;
4540                                         max_count--;
4541                                 }
4542                         }
4543 
4544                         break;
4545                 }
4546 
4547                 case EMLXS_PARM_GET:
4548                 {
4549                         emlxs_parm_t    *parm_in;
4550                         emlxs_parm_t    *parm_out;
4551                         emlxs_config_t  *cfg;
4552                         uint32_t        i;
4553                         uint32_t        len;
4554 
4555                         if (pm->pm_cmd_len < sizeof (emlxs_parm_t)) {
4556                                 EMLXS_MSGF(EMLXS_CONTEXT,
4557                                     &emlxs_sfs_debug_msg,
4558                                     "fca_port_manage: PARM_GET. "
4559                                     "inbuf too small.");
4560 
4561                                 ret = FC_BADCMD;
4562                                 break;
4563                         }
4564 
4565                         if (pm->pm_stat_len < sizeof (emlxs_parm_t)) {
4566                                 EMLXS_MSGF(EMLXS_CONTEXT,
4567                                     &emlxs_sfs_debug_msg,
4568                                     "fca_port_manage: PARM_GET. "
4569                                     "outbuf too small");
4570 
4571                                 ret = FC_BADCMD;
4572                                 break;
4573                         }
4574 
4575                         parm_in = (emlxs_parm_t *)pm->pm_cmd_buf;
4576                         parm_out = (emlxs_parm_t *)pm->pm_stat_buf;
4577                         len = strlen(parm_in->label);
4578                         cfg = &CFG;
4579                         ret = FC_BADOBJECT;
4580 
4581                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4582                             "fca_port_manage: PARM_GET: %s=0x%x,%d",
4583                             parm_in->label, parm_in->current,
4584                             parm_in->current);
4585 
4586                         for (i = 0; i < NUM_CFG_PARAM; i++, cfg++) {
4587                                 if (len == strlen(cfg->string) &&
4588                                     (strcmp(parm_in->label,
4589                                     cfg->string) == 0)) {
4590                                         (void) strncpy(parm_out->label,
4591                                             cfg->string,
4592                                             (sizeof (parm_out->label)-1));
4593                                         parm_out->min = cfg->low;
4594                                         parm_out->max = cfg->hi;
4595                                         parm_out->def = cfg->def;
4596                                         parm_out->current = cfg->current;
4597                                         parm_out->flags = cfg->flags;
4598                                         (void) strncpy(parm_out->help,
4599                                             cfg->help,
4600                                             (sizeof (parm_out->help)-1));
4601 
4602                                         ret = FC_SUCCESS;
4603                                         break;
4604                                 }
4605                         }
4606 
4607                         break;
4608                 }
4609 
4610                 case EMLXS_PARM_SET:
4611                 {
4612                         emlxs_parm_t    *parm_in;
4613                         emlxs_parm_t    *parm_out;
4614                         emlxs_config_t  *cfg;
4615                         uint32_t        i;
4616                         uint32_t        len;
4617 
4618                         if (pm->pm_cmd_len < sizeof (emlxs_parm_t)) {
4619                                 EMLXS_MSGF(EMLXS_CONTEXT,
4620                                     &emlxs_sfs_debug_msg,
4621                                     "fca_port_manage: PARM_GET. "
4622                                     "inbuf too small.");
4623 
4624                                 ret = FC_BADCMD;
4625                                 break;
4626                         }
4627 
4628                         if (pm->pm_stat_len < sizeof (emlxs_parm_t)) {
4629                                 EMLXS_MSGF(EMLXS_CONTEXT,
4630                                     &emlxs_sfs_debug_msg,
4631                                     "fca_port_manage: PARM_GET. "
4632                                     "outbuf too small");
4633                                 ret = FC_BADCMD;
4634                                 break;
4635                         }
4636 
4637                         parm_in = (emlxs_parm_t *)pm->pm_cmd_buf;
4638                         parm_out = (emlxs_parm_t *)pm->pm_stat_buf;
4639                         len = strlen(parm_in->label);
4640                         cfg = &CFG;
4641                         ret = FC_BADOBJECT;
4642 
4643                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4644                             "fca_port_manage: PARM_SET: %s=0x%x,%d",
4645                             parm_in->label, parm_in->current,
4646                             parm_in->current);
4647 
4648                         for (i = 0; i < NUM_CFG_PARAM; i++, cfg++) {
4649                                 /* Find matching parameter string */
4650                                 if (len == strlen(cfg->string) &&
4651                                     (strcmp(parm_in->label,
4652                                     cfg->string) == 0)) {
4653                                         /* Attempt to update parameter */
4654                                         if (emlxs_set_parm(hba, i,
4655                                             parm_in->current) == FC_SUCCESS) {
4656                                                 (void) strncpy(parm_out->label,
4657                                                     cfg->string,
4658                                                     (sizeof (parm_out->label)-
4659                                                     1));
4660                                                 parm_out->min = cfg->low;
4661                                                 parm_out->max = cfg->hi;
4662                                                 parm_out->def = cfg->def;
4663                                                 parm_out->current =
4664                                                     cfg->current;
4665                                                 parm_out->flags = cfg->flags;
4666                                                 (void) strncpy(parm_out->help,
4667                                                     cfg->help,
4668                                                     (sizeof (parm_out->help)-
4669                                                     1));
4670 
4671                                                 ret = FC_SUCCESS;
4672                                         }
4673 
4674                                         break;
4675                                 }
4676                         }
4677 
4678                         break;
4679                 }
4680 
4681                 case EMLXS_LOG_GET:
4682                 {
4683                         emlxs_log_req_t         *req;
4684                         emlxs_log_resp_t        *resp;
4685                         uint32_t                len;
4686 
4687                         /* Check command size */
4688                         if (pm->pm_cmd_len < sizeof (emlxs_log_req_t)) {
4689                                 ret = FC_BADCMD;
4690                                 break;
4691                         }
4692 
4693                         /* Get the request */
4694                         req = (emlxs_log_req_t *)pm->pm_cmd_buf;
4695 
4696                         /* Calculate the response length from the request */
4697                         len = sizeof (emlxs_log_resp_t) +
4698                             (req->count * MAX_LOG_MSG_LENGTH);
4699 
4700                                         /* Check the response buffer length */
4701                         if (pm->pm_stat_len < len) {
4702                                 ret = FC_BADCMD;
4703                                 break;
4704                         }
4705 
4706                         /* Get the response pointer */
4707                         resp = (emlxs_log_resp_t *)pm->pm_stat_buf;
4708 
4709                         /* Get the request log enties */
4710                         (void) emlxs_msg_log_get(hba, req, resp);
4711 
4712                         ret = FC_SUCCESS;
4713                         break;
4714                 }
4715 
4716                 case EMLXS_GET_BOOT_REV:
4717                 {
4718                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4719                             "fca_port_manage: GET_BOOT_REV");
4720 
4721                         if (pm->pm_stat_len < strlen(vpd->boot_version)) {
4722                                 ret = FC_NOMEM;
4723                                 break;
4724                         }
4725 
4726                         bzero(pm->pm_stat_buf, pm->pm_stat_len);
4727                         (void) snprintf(pm->pm_stat_buf, pm->pm_stat_len,
4728                             "%s %s", hba->model_info.model, vpd->boot_version);
4729 
4730                         break;
4731                 }
4732 
4733                 case EMLXS_DOWNLOAD_BOOT:
4734                         if (!(hba->flag & FC_ONLINE_MODE)) {
4735                                 return (FC_OFFLINE);
4736                         }
4737                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4738                             "fca_port_manage: DOWNLOAD_BOOT");
4739 
4740                         ret = emlxs_fw_download(hba, pm->pm_data_buf,
4741                             pm->pm_data_len, 1);
4742                         break;
4743 
4744                 case EMLXS_DOWNLOAD_CFL:
4745                 {
4746                         uint32_t *buffer;
4747                         uint32_t region;
4748                         uint32_t length;
4749 
4750                         if (!(hba->flag & FC_ONLINE_MODE)) {
4751                                 return (FC_OFFLINE);
4752                         }
4753 
4754                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4755                             "fca_port_manage: DOWNLOAD_CFL");
4756 
4757                         /* Extract the region number from the first word. */
4758                         buffer = (uint32_t *)pm->pm_data_buf;
4759                         region = *buffer++;
4760 
4761                         /* Adjust the image length for the header word */
4762                         length = pm->pm_data_len - 4;
4763 
4764                         ret =
4765                             emlxs_cfl_download(hba, region, (caddr_t)buffer,
4766                             length);
4767                         break;
4768                 }
4769 
4770                 case EMLXS_VPD_GET:
4771                 {
4772                         emlxs_vpd_desc_t        *vpd_out;
4773 
4774                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4775                             "fca_port_manage: VPD_GET");
4776 
4777                         if (pm->pm_stat_len < sizeof (emlxs_vpd_desc_t)) {
4778                                 ret = FC_BADCMD;
4779                                 break;
4780                         }
4781 
4782                         vpd_out = (emlxs_vpd_desc_t *)pm->pm_stat_buf;
4783                         bzero(vpd_out, pm->pm_stat_len);
4784 
4785                         (void) strncpy(vpd_out->id, vpd->id,
4786                             (sizeof (vpd_out->id)-1));
4787                         (void) strncpy(vpd_out->part_num, vpd->part_num,
4788                             (sizeof (vpd_out->part_num)-1));
4789                         (void) strncpy(vpd_out->eng_change, vpd->eng_change,
4790                             (sizeof (vpd_out->eng_change)-1));
4791                         (void) strncpy(vpd_out->manufacturer, vpd->manufacturer,
4792                             (sizeof (vpd_out->manufacturer)-1));
4793                         (void) strncpy(vpd_out->serial_num, vpd->serial_num,
4794                             (sizeof (vpd_out->serial_num)-1));
4795                         (void) strncpy(vpd_out->model, vpd->model,
4796                             (sizeof (vpd_out->model)-1));
4797                         (void) strncpy(vpd_out->model_desc, vpd->model_desc,
4798                             (sizeof (vpd_out->model_desc)-1));
4799                         (void) strncpy(vpd_out->port_num, vpd->port_num,
4800                             (sizeof (vpd_out->port_num)-1));
4801                         (void) strncpy(vpd_out->prog_types, vpd->prog_types,
4802                             (sizeof (vpd_out->prog_types)-1));
4803 
4804                         ret = FC_SUCCESS;
4805 
4806                         break;
4807                 }
4808 
4809                 case EMLXS_VPD_GET_V2:
4810                 {
4811                         emlxs_vpd_desc_v2_t     *vpd_out;
4812 
4813                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4814                             "fca_port_manage: VPD_GET_V2");
4815 
4816                         if (pm->pm_stat_len < sizeof (emlxs_vpd_desc_v2_t)) {
4817                                 ret = FC_BADCMD;
4818                                 break;
4819                         }
4820 
4821                         vpd_out = (emlxs_vpd_desc_v2_t *)pm->pm_stat_buf;
4822                         bzero(vpd_out, pm->pm_stat_len);
4823 
4824                         (void) strncpy(vpd_out->id, vpd->id,
4825                             (sizeof (vpd_out->id)-1));
4826                         (void) strncpy(vpd_out->part_num, vpd->part_num,
4827                             (sizeof (vpd_out->part_num)-1));
4828                         (void) strncpy(vpd_out->eng_change, vpd->eng_change,
4829                             (sizeof (vpd_out->eng_change)-1));
4830                         (void) strncpy(vpd_out->manufacturer, vpd->manufacturer,
4831                             (sizeof (vpd_out->manufacturer)-1));
4832                         (void) strncpy(vpd_out->serial_num, vpd->serial_num,
4833                             (sizeof (vpd_out->serial_num)-1));
4834                         (void) strncpy(vpd_out->model, vpd->model,
4835                             (sizeof (vpd_out->model)-1));
4836                         (void) strncpy(vpd_out->model_desc, vpd->model_desc,
4837                             (sizeof (vpd_out->model_desc)-1));
4838                         (void) strncpy(vpd_out->port_num, vpd->port_num,
4839                             (sizeof (vpd_out->port_num)-1));
4840                         (void) strncpy(vpd_out->prog_types, vpd->prog_types,
4841                             (sizeof (vpd_out->prog_types)-1));
4842 
4843                         ret = FC_SUCCESS;
4844 
4845                         break;
4846                 }
4847 
4848                 case EMLXS_PHY_GET:
4849                 {
4850                         emlxs_phy_desc_t        *phy_out;
4851                         MAILBOXQ *mbq;
4852                         MAILBOX4 *mb;
4853                         IOCTL_COMMON_GET_PHY_DETAILS *phy;
4854                         mbox_req_hdr_t  *hdr_req;
4855 
4856                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4857                             "fca_port_manage: EMLXS_PHY_GET");
4858 
4859                         if (pm->pm_stat_len < sizeof (emlxs_phy_desc_t)) {
4860                                 ret = FC_BADCMD;
4861                                 break;
4862                         }
4863 
4864                         if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) {
4865                                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4866                                     "Invalid sli_mode. mode=%d", hba->sli_mode);
4867                                 ret = FC_BADCMD;
4868                                 break;
4869                         }
4870 
4871                         phy_out = (emlxs_phy_desc_t *)pm->pm_stat_buf;
4872                         bzero(phy_out, sizeof (emlxs_phy_desc_t));
4873 
4874                         if ((mbq = (MAILBOXQ *)emlxs_mem_get(hba,
4875                             MEM_MBOX)) == 0) {
4876                                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4877                                     "Unable to allocate mailbox buffer.");
4878                                 ret = FC_NOMEM;
4879                                 break;
4880                         }
4881 
4882                         mb = (MAILBOX4*)mbq;
4883 
4884                         bzero((void *) mb, MAILBOX_CMD_SLI4_BSIZE);
4885 
4886                         mb->un.varSLIConfig.be.embedded = 1;
4887                         mbq->mbox_cmpl = NULL;
4888 
4889                         mb->mbxCommand = MBX_SLI_CONFIG;
4890                         mb->mbxOwner = OWN_HOST;
4891 
4892                         hdr_req = (mbox_req_hdr_t *)
4893                             &mb->un.varSLIConfig.be.un_hdr.hdr_req;
4894                         hdr_req->subsystem = IOCTL_SUBSYSTEM_COMMON;
4895                         hdr_req->opcode = COMMON_OPCODE_GET_PHY_DETAILS;
4896                         hdr_req->timeout = 0;
4897                         hdr_req->req_length =
4898                             sizeof (IOCTL_COMMON_GET_PHY_DETAILS);
4899 
4900                         phy = (IOCTL_COMMON_GET_PHY_DETAILS *)(hdr_req + 1);
4901 
4902                         /* Send read request */
4903                         if (EMLXS_SLI_ISSUE_MBOX_CMD(hba, mbq, MBX_WAIT, 0) !=
4904                             MBX_SUCCESS) {
4905                                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4906                                     "Unable to get PHY details. status=%x",
4907                                     mb->mbxStatus);
4908 
4909                                 emlxs_mem_put(hba, MEM_MBOX, (void *)mbq);
4910 
4911                                 ret = FC_FAILURE;
4912                                 break;
4913                         }
4914 
4915                         phy_out->phy_type = phy->params.response.phy_type;
4916                         phy_out->interface_type =
4917                             phy->params.response.interface_type;
4918                         phy_out->misc_params = phy->params.response.misc_params;
4919                         phy_out->rsvd[0] = phy->params.response.rsvd[0];
4920                         phy_out->rsvd[1] = phy->params.response.rsvd[1];
4921                         phy_out->rsvd[2] = phy->params.response.rsvd[2];
4922                         phy_out->rsvd[3] = phy->params.response.rsvd[3];
4923 
4924                         emlxs_mem_put(hba, MEM_MBOX, (void *)mbq);
4925 
4926                         ret = FC_SUCCESS;
4927                         break;
4928                 }
4929 
4930 #ifdef NODE_THROTTLE_SUPPORT
4931                 case EMLXS_SET_THROTTLE:
4932                 {
4933                         emlxs_node_t *node;
4934                         uint32_t scope = 0;
4935                         uint32_t i;
4936                         char buf1[32];
4937                         emlxs_throttle_desc_t *desc;
4938 
4939                         if ((pm->pm_data_buf == NULL) ||
4940                             (pm->pm_data_len !=
4941                             sizeof (emlxs_throttle_desc_t))) {
4942                                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4943                                     "fca_port_manage: EMLXS_SET_THROTTLE: "
4944                                     "Descriptor buffer not valid. %d",
4945                                     pm->pm_data_len);
4946                                 ret = FC_BADCMD;
4947                                 break;
4948                         }
4949 
4950                         if ((pm->pm_cmd_buf != NULL) &&
4951                             (pm->pm_cmd_len == sizeof (uint32_t))) {
4952                                 scope = *(uint32_t *)pm->pm_cmd_buf;
4953                         }
4954 
4955                         desc = (emlxs_throttle_desc_t *)pm->pm_data_buf;
4956                         desc->throttle = MIN(desc->throttle, MAX_NODE_THROTTLE);
4957 
4958                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
4959                             "fca_port_manage: EMLXS_SET_THROTTLE: scope=%d "
4960                             "depth=%d",
4961                             scope, desc->throttle);
4962 
4963                         rw_enter(&port->node_rwlock, RW_WRITER);
4964                         switch (scope) {
4965                         case 1: /* all */
4966                                 for (i = 0; i < EMLXS_NUM_HASH_QUES; i++) {
4967                                 node = port->node_table[i];
4968                                 while (node != NULL) {
4969                                         node->io_throttle = desc->throttle;
4970 
4971                                         EMLXS_MSGF(EMLXS_CONTEXT,
4972                                             &emlxs_sfs_debug_msg,
4973                                             "EMLXS_SET_THROTTLE: wwpn=%s "
4974                                             "depth=%d",
4975                                             emlxs_wwn_xlate(buf1, sizeof (buf1),
4976                                             (uint8_t *)&node->nlp_portname),
4977                                             node->io_throttle);
4978 
4979                                         node = (NODELIST *)node->nlp_list_next;
4980                                 }
4981                                 }
4982                                 break;
4983 
4984                         case 2: /* FCP */
4985                                 for (i = 0; i < EMLXS_NUM_HASH_QUES; i++) {
4986                                 node = port->node_table[i];
4987                                 while (node != NULL) {
4988                                         if (!(node->nlp_fcp_info &
4989                                             NLP_FCP_TGT_DEVICE)) {
4990                                                 node = (NODELIST *)
4991                                                     node->nlp_list_next;
4992                                                 continue;
4993                                         }
4994 
4995                                         node->io_throttle = desc->throttle;
4996 
4997                                         EMLXS_MSGF(EMLXS_CONTEXT,
4998                                             &emlxs_sfs_debug_msg,
4999                                             "EMLXS_SET_THROTTLE: wwpn=%s "
5000                                             "depth=%d",
5001                                             emlxs_wwn_xlate(buf1, sizeof (buf1),
5002                                             (uint8_t *)&node->nlp_portname),
5003                                             node->io_throttle);
5004 
5005                                         node = (NODELIST *)node->nlp_list_next;
5006                                 }
5007                                 }
5008                                 break;
5009 
5010                         case 0: /* WWPN */
5011                         default:
5012                                 for (i = 0; i < EMLXS_NUM_HASH_QUES; i++) {
5013                                 node = port->node_table[i];
5014                                 while (node != NULL) {
5015                                         if (bcmp((caddr_t)&node->nlp_portname,
5016                                             desc->wwpn, 8)) {
5017                                                 node = (NODELIST *)
5018                                                     node->nlp_list_next;
5019                                                 continue;
5020                                         }
5021 
5022                                         node->io_throttle = desc->throttle;
5023 
5024                                         EMLXS_MSGF(EMLXS_CONTEXT,
5025                                             &emlxs_sfs_debug_msg,
5026                                             "EMLXS_SET_THROTTLE: wwpn=%s "
5027                                             "depth=%d",
5028                                             emlxs_wwn_xlate(buf1, sizeof (buf1),
5029                                             (uint8_t *)&node->nlp_portname),
5030                                             node->io_throttle);
5031 
5032                                         goto set_throttle_done;
5033                                 }
5034                                 }
5035 set_throttle_done:
5036                                 break;
5037                         }
5038 
5039                         rw_exit(&port->node_rwlock);
5040                         ret = FC_SUCCESS;
5041 
5042                         break;
5043                 }
5044 
5045                 case EMLXS_GET_THROTTLE:
5046                 {
5047                         emlxs_node_t *node;
5048                         uint32_t i;
5049                         uint32_t j;
5050                         char buf1[32];
5051                         uint32_t count;
5052                         emlxs_throttle_desc_t *desc;
5053 
5054                         if (pm->pm_stat_len == sizeof (uint32_t)) {
5055                                 count = emlxs_nport_count(port);
5056                                 *(uint32_t *)pm->pm_stat_buf = count;
5057 
5058                                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5059                                     "fca_port_manage: EMLXS_GET_THROTTLE: "
5060                                     "count=%d",
5061                                     count);
5062 
5063                                 ret = FC_SUCCESS;
5064                                 break;
5065                         }
5066 
5067                         if ((pm->pm_stat_buf == NULL) ||
5068                             (pm->pm_stat_len <
5069                             sizeof (emlxs_throttle_desc_t))) {
5070                                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5071                                     "fca_port_manage: EMLXS_GET_THROTTLE: "
5072                                     "Descriptor buffer too small. %d",
5073                                     pm->pm_data_len);
5074                                 ret = FC_BADCMD;
5075                                 break;
5076                         }
5077 
5078                         count = pm->pm_stat_len /
5079                             sizeof (emlxs_throttle_desc_t);
5080                         desc = (emlxs_throttle_desc_t *)pm->pm_stat_buf;
5081 
5082                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5083                             "fca_port_manage: EMLXS_GET_THROTTLE: max=%d",
5084                             count);
5085 
5086                         rw_enter(&port->node_rwlock, RW_READER);
5087                         j = 0;
5088                         for (i = 0; i < EMLXS_NUM_HASH_QUES; i++) {
5089                                 node = port->node_table[i];
5090                                 while (node != NULL) {
5091                                         if ((node->nlp_DID & 0xFFF000) ==
5092                                             0xFFF000) {
5093                                                 node = (NODELIST *)
5094                                                     node->nlp_list_next;
5095                                                 continue;
5096                                         }
5097 
5098                                         bcopy((uint8_t *)&node->nlp_portname,
5099                                             desc[j].wwpn, 8);
5100                                         desc[j].throttle = node->io_throttle;
5101 
5102                                         EMLXS_MSGF(EMLXS_CONTEXT,
5103                                             &emlxs_sfs_debug_msg,
5104                                             "EMLXS_GET_THROTTLE: wwpn=%s "
5105                                             "depth=%d",
5106                                             emlxs_wwn_xlate(buf1, sizeof (buf1),
5107                                             desc[j].wwpn),
5108                                             desc[j].throttle);
5109 
5110                                         j++;
5111                                         if (j >= count) {
5112                                                 goto get_throttle_done;
5113                                         }
5114 
5115                                         node = (NODELIST *)node->nlp_list_next;
5116                                 }
5117                         }
5118 get_throttle_done:
5119                         rw_exit(&port->node_rwlock);
5120                         ret = FC_SUCCESS;
5121 
5122                         break;
5123                 }
5124 #endif /* NODE_THROTTLE_SUPPORT */
5125 
5126                 case EMLXS_GET_FCIO_REV:
5127                 {
5128                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5129                             "fca_port_manage: GET_FCIO_REV");
5130 
5131                         if (pm->pm_stat_len < sizeof (uint32_t)) {
5132                                 ret = FC_NOMEM;
5133                                 break;
5134                         }
5135 
5136                         bzero(pm->pm_stat_buf, pm->pm_stat_len);
5137                         *(uint32_t *)pm->pm_stat_buf = FCIO_REV;
5138 
5139                         break;
5140                 }
5141 
5142                 case EMLXS_GET_DFC_REV:
5143                 {
5144                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5145                             "fca_port_manage: GET_DFC_REV");
5146 
5147                         if (pm->pm_stat_len < sizeof (uint32_t)) {
5148                                 ret = FC_NOMEM;
5149                                 break;
5150                         }
5151 
5152                         bzero(pm->pm_stat_buf, pm->pm_stat_len);
5153                         *(uint32_t *)pm->pm_stat_buf = DFC_REV;
5154 
5155                         break;
5156                 }
5157 
5158                 case EMLXS_SET_BOOT_STATE:
5159                 case EMLXS_SET_BOOT_STATE_old:
5160                 {
5161                         uint32_t        state;
5162 
5163                         if (!(hba->flag & FC_ONLINE_MODE)) {
5164                                 return (FC_OFFLINE);
5165                         }
5166                         if (pm->pm_cmd_len < sizeof (uint32_t)) {
5167                                 EMLXS_MSGF(EMLXS_CONTEXT,
5168                                     &emlxs_sfs_debug_msg,
5169                                     "fca_port_manage: SET_BOOT_STATE");
5170                                 ret = FC_BADCMD;
5171                                 break;
5172                         }
5173 
5174                         state = *(uint32_t *)pm->pm_cmd_buf;
5175 
5176                         if (state == 0) {
5177                                 EMLXS_MSGF(EMLXS_CONTEXT,
5178                                     &emlxs_sfs_debug_msg,
5179                                     "fca_port_manage: SET_BOOT_STATE: "
5180                                     "Disable");
5181                                 ret = emlxs_boot_code_disable(hba);
5182                         } else {
5183                                 EMLXS_MSGF(EMLXS_CONTEXT,
5184                                     &emlxs_sfs_debug_msg,
5185                                     "fca_port_manage: SET_BOOT_STATE: "
5186                                     "Enable");
5187                                 ret = emlxs_boot_code_enable(hba);
5188                         }
5189 
5190                         break;
5191                 }
5192 
5193                 case EMLXS_GET_BOOT_STATE:
5194                 case EMLXS_GET_BOOT_STATE_old:
5195                 {
5196                         if (!(hba->flag & FC_ONLINE_MODE)) {
5197                                 return (FC_OFFLINE);
5198                         }
5199                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5200                             "fca_port_manage: GET_BOOT_STATE");
5201 
5202                         if (pm->pm_stat_len < sizeof (uint32_t)) {
5203                                 ret = FC_NOMEM;
5204                                 break;
5205                         }
5206                         bzero(pm->pm_stat_buf, pm->pm_stat_len);
5207 
5208                         ret = emlxs_boot_code_state(hba);
5209 
5210                         if (ret == FC_SUCCESS) {
5211                                 *(uint32_t *)pm->pm_stat_buf = 1;
5212                                 ret = FC_SUCCESS;
5213                         } else if (ret == FC_FAILURE) {
5214                                 ret = FC_SUCCESS;
5215                         }
5216 
5217                         break;
5218                 }
5219 
5220                 case EMLXS_HW_ERROR_TEST:
5221                 {
5222                         /*
5223                          * This command is used for simulating HW ERROR
5224                          * on SLI4 only.
5225                          */
5226                         if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) {
5227                                 ret = FC_INVALID_REQUEST;
5228                                 break;
5229                         }
5230                         hba->sli.sli4.flag |= EMLXS_SLI4_HW_ERROR;
5231                         break;
5232                 }
5233 
5234                 case EMLXS_MB_TIMEOUT_TEST:
5235                 {
5236                         if (!(hba->flag & FC_ONLINE_MODE)) {
5237                                 return (FC_OFFLINE);
5238                         }
5239 
5240                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5241                             "fca_port_manage: HW_ERROR_TEST");
5242 
5243                         /* Trigger a mailbox timeout */
5244                         hba->mbox_timer = hba->timer_tics;
5245 
5246                         break;
5247                 }
5248 
5249                 case EMLXS_TEST_CODE:
5250                 {
5251                         uint32_t *cmd;
5252 
5253                         if (!(hba->flag & FC_ONLINE_MODE)) {
5254                                 return (FC_OFFLINE);
5255                         }
5256 
5257                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5258                             "fca_port_manage: TEST_CODE");
5259 
5260                         if (pm->pm_cmd_len < sizeof (uint32_t)) {
5261                                 EMLXS_MSGF(EMLXS_CONTEXT,
5262                                     &emlxs_sfs_debug_msg,
5263                                     "fca_port_manage: TEST_CODE. "
5264                                     "inbuf to small.");
5265 
5266                                 ret = FC_BADCMD;
5267                                 break;
5268                         }
5269 
5270                         cmd = (uint32_t *)pm->pm_cmd_buf;
5271 
5272                         ret = emlxs_test(hba, cmd[0],
5273                             (pm->pm_cmd_len/sizeof (uint32_t)) - 1, &cmd[1]);
5274 
5275                         break;
5276                 }
5277 
5278                 case EMLXS_BAR_IO:
5279                 {
5280                         uint32_t *cmd;
5281                         uint32_t *datap;
5282                         FCIO_Q_STAT_t *qp;
5283                         clock_t  time;
5284                         uint32_t offset;
5285                         caddr_t  addr;
5286                         uint32_t i;
5287                         uint32_t tx_cnt;
5288                         uint32_t chip_cnt;
5289 
5290                         cmd = (uint32_t *)pm->pm_cmd_buf;
5291                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5292                             "fca_port_manage: BAR_IO %x %x %x",
5293                             cmd[0], cmd[1], cmd[2]);
5294 
5295                         offset = cmd[1];
5296 
5297                         ret = FC_SUCCESS;
5298 
5299                         switch (cmd[0]) {
5300                         case 2: /* bar1read */
5301                                 if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) {
5302                                         return (FC_BADCMD);
5303                                 }
5304 
5305                                 /* Registers in this range are invalid */
5306                                 if ((offset >= 0x4C00) && (offset < 0x5000)) {
5307                                         return (FC_BADCMD);
5308                                 }
5309                                 if ((offset >= 0x5800) || (offset & 0x3)) {
5310                                         return (FC_BADCMD);
5311                                 }
5312                                 datap = (uint32_t *)pm->pm_stat_buf;
5313 
5314                                 for (i = 0; i < pm->pm_stat_len;
5315                                     i += sizeof (uint32_t)) {
5316                                         if ((offset >= 0x4C00) &&
5317                                             (offset < 0x5000)) {
5318                                                 pm->pm_stat_len = i;
5319                                                 break;
5320                                         }
5321                                         if (offset >= 0x5800) {
5322                                                 pm->pm_stat_len = i;
5323                                                 break;
5324                                         }
5325                                         addr = hba->sli.sli4.bar1_addr + offset;
5326                                         *datap = READ_BAR1_REG(hba, addr);
5327                                         datap++;
5328                                         offset += sizeof (uint32_t);
5329                                 }
5330 #ifdef FMA_SUPPORT
5331                                 /* Access handle validation */
5332                                 EMLXS_CHK_ACC_HANDLE(hba,
5333                                     hba->sli.sli4.bar1_acc_handle);
5334 #endif  /* FMA_SUPPORT */
5335                                 break;
5336                         case 3: /* bar2read */
5337                                 if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) {
5338                                         return (FC_BADCMD);
5339                                 }
5340                                 if ((offset >= 0x1000) || (offset & 0x3)) {
5341                                         return (FC_BADCMD);
5342                                 }
5343                                 datap = (uint32_t *)pm->pm_stat_buf;
5344 
5345                                 for (i = 0; i < pm->pm_stat_len;
5346                                     i += sizeof (uint32_t)) {
5347                                         *datap = READ_BAR2_REG(hba,
5348                                             hba->sli.sli4.bar2_addr + offset);
5349                                         datap++;
5350                                         offset += sizeof (uint32_t);
5351                                 }
5352 #ifdef FMA_SUPPORT
5353                                 /* Access handle validation */
5354                                 EMLXS_CHK_ACC_HANDLE(hba,
5355                                     hba->sli.sli4.bar2_acc_handle);
5356 #endif  /* FMA_SUPPORT */
5357                                 break;
5358                         case 4: /* bar1write */
5359                                 if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) {
5360                                         return (FC_BADCMD);
5361                                 }
5362                                 WRITE_BAR1_REG(hba, hba->sli.sli4.bar1_addr +
5363                                     offset, cmd[2]);
5364 #ifdef FMA_SUPPORT
5365                                 /* Access handle validation */
5366                                 EMLXS_CHK_ACC_HANDLE(hba,
5367                                     hba->sli.sli4.bar1_acc_handle);
5368 #endif  /* FMA_SUPPORT */
5369                                 break;
5370                         case 5: /* bar2write */
5371                                 if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) {
5372                                         return (FC_BADCMD);
5373                                 }
5374                                 WRITE_BAR2_REG(hba, hba->sli.sli4.bar2_addr +
5375                                     offset, cmd[2]);
5376 #ifdef FMA_SUPPORT
5377                                 /* Access handle validation */
5378                                 EMLXS_CHK_ACC_HANDLE(hba,
5379                                     hba->sli.sli4.bar2_acc_handle);
5380 #endif  /* FMA_SUPPORT */
5381                                 break;
5382                         case 6: /* dumpbsmbox */
5383                                 if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) {
5384                                         return (FC_BADCMD);
5385                                 }
5386                                 if (offset != 0) {
5387                                         return (FC_BADCMD);
5388                                 }
5389 
5390                                 bcopy((caddr_t)hba->sli.sli4.bootstrapmb.virt,
5391                                     (caddr_t)pm->pm_stat_buf, 256);
5392                                 break;
5393                         case 7: /* pciread */
5394                                 if ((offset >= 0x200) || (offset & 0x3)) {
5395                                         return (FC_BADCMD);
5396                                 }
5397                                 datap = (uint32_t *)pm->pm_stat_buf;
5398                                 for (i = 0; i < pm->pm_stat_len;
5399                                     i += sizeof (uint32_t)) {
5400                                         *datap = ddi_get32(hba->pci_acc_handle,
5401                                             (uint32_t *)(hba->pci_addr +
5402                                             offset));
5403                                         datap++;
5404                                         offset += sizeof (uint32_t);
5405                                 }
5406 #ifdef FMA_SUPPORT
5407                                 /* Access handle validation */
5408                                 EMLXS_CHK_ACC_HANDLE(hba, hba->pci_acc_handle);
5409 #endif  /* FMA_SUPPORT */
5410                                 break;
5411                         case 8: /* abortall */
5412                                 if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) {
5413                                         return (FC_BADCMD);
5414                                 }
5415                                 emlxs_abort_all(hba, &tx_cnt, &chip_cnt);
5416                                 datap = (uint32_t *)pm->pm_stat_buf;
5417                                 *datap++ = tx_cnt;
5418                                 *datap = chip_cnt;
5419                                 break;
5420                         case 9: /* get_q_info */
5421                                 if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) {
5422                                         return (FC_BADCMD);
5423                                 }
5424                                 qp = (FCIO_Q_STAT_t *)pm->pm_stat_buf;
5425                                 for (i = 0; i < FCIO_MAX_EQS; i++) {
5426                                         addr = hba->sli.sli4.eq[i].addr.virt;
5427                                         qp->eq[i].host_index =
5428                                             hba->sli.sli4.eq[i].host_index;
5429                                         qp->eq[i].max_index =
5430                                             hba->sli.sli4.eq[i].max_index;
5431                                         qp->eq[i].qid =
5432                                             hba->sli.sli4.eq[i].qid;
5433                                         qp->eq[i].msix_vector =
5434                                             hba->sli.sli4.eq[i].msix_vector;
5435                                         qp->eq[i].phys =
5436                                             hba->sli.sli4.eq[i].addr.phys;
5437                                         qp->eq[i].virt = PADDR_LO(
5438                                             (uintptr_t)addr);
5439                                         qp->eq[i].virt_hi  = PADDR_HI(
5440                                             (uintptr_t)addr);
5441                                         qp->eq[i].max_proc =
5442                                             hba->sli.sli4.eq[i].max_proc;
5443                                         qp->eq[i].isr_count =
5444                                             hba->sli.sli4.eq[i].isr_count;
5445                                         qp->eq[i].num_proc =
5446                                             hba->sli.sli4.eq[i].num_proc;
5447                                 }
5448                                 for (i = 0; i < FCIO_MAX_CQS; i++) {
5449                                         addr = hba->sli.sli4.cq[i].addr.virt;
5450                                         qp->cq[i].host_index =
5451                                             hba->sli.sli4.cq[i].host_index;
5452                                         qp->cq[i].max_index =
5453                                             hba->sli.sli4.cq[i].max_index;
5454                                         qp->cq[i].qid =
5455                                             hba->sli.sli4.cq[i].qid;
5456                                         qp->cq[i].eqid =
5457                                             hba->sli.sli4.cq[i].eqid;
5458                                         qp->cq[i].type =
5459                                             hba->sli.sli4.cq[i].type;
5460                                         qp->cq[i].phys =
5461                                             hba->sli.sli4.cq[i].addr.phys;
5462                                         qp->cq[i].virt = PADDR_LO(
5463                                             (uintptr_t)addr);
5464                                         qp->cq[i].virt_hi = PADDR_HI(
5465                                             (uintptr_t)addr);
5466                                         qp->cq[i].max_proc =
5467                                             hba->sli.sli4.cq[i].max_proc;
5468                                         qp->cq[i].isr_count =
5469                                             hba->sli.sli4.cq[i].isr_count;
5470                                         qp->cq[i].num_proc =
5471                                             hba->sli.sli4.cq[i].num_proc;
5472                                 }
5473                                 for (i = 0; i < FCIO_MAX_WQS; i++) {
5474                                         addr = hba->sli.sli4.wq[i].addr.virt;
5475                                         qp->wq[i].host_index =
5476                                             hba->sli.sli4.wq[i].host_index;
5477                                         qp->wq[i].max_index =
5478                                             hba->sli.sli4.wq[i].max_index;
5479                                         qp->wq[i].port_index =
5480                                             hba->sli.sli4.wq[i].port_index;
5481                                         qp->wq[i].release_depth =
5482                                             hba->sli.sli4.wq[i].release_depth;
5483                                         qp->wq[i].qid =
5484                                             hba->sli.sli4.wq[i].qid;
5485                                         qp->wq[i].cqid =
5486                                             hba->sli.sli4.wq[i].cqid;
5487                                         qp->wq[i].phys =
5488                                             hba->sli.sli4.wq[i].addr.phys;
5489                                         qp->wq[i].virt = PADDR_LO(
5490                                             (uintptr_t)addr);
5491                                         qp->wq[i].virt_hi = PADDR_HI(
5492                                             (uintptr_t)addr);
5493                                         qp->wq[i].num_proc =
5494                                             hba->sli.sli4.wq[i].num_proc;
5495                                         qp->wq[i].num_busy =
5496                                             hba->sli.sli4.wq[i].num_busy;
5497                                 }
5498                                 for (i = 0; i < FCIO_MAX_RQS; i++) {
5499                                         addr = hba->sli.sli4.rq[i].addr.virt;
5500                                         qp->rq[i].qid =
5501                                             hba->sli.sli4.rq[i].qid;
5502                                         qp->rq[i].cqid =
5503                                             hba->sli.sli4.rq[i].cqid;
5504                                         qp->rq[i].host_index =
5505                                             hba->sli.sli4.rq[i].host_index;
5506                                         qp->rq[i].max_index =
5507                                             hba->sli.sli4.rq[i].max_index;
5508                                         qp->rq[i].phys =
5509                                             hba->sli.sli4.rq[i].addr.phys;
5510                                         qp->rq[i].virt = PADDR_LO(
5511                                             (uintptr_t)addr);
5512                                         qp->rq[i].virt_hi = PADDR_HI(
5513                                             (uintptr_t)addr);
5514                                         qp->rq[i].num_proc =
5515                                             hba->sli.sli4.rq[i].num_proc;
5516                                 }
5517                                 qp->que_start_timer =
5518                                     hba->sli.sli4.que_stat_timer;
5519                                 (void) drv_getparm(LBOLT, &time);
5520                                 qp->que_current_timer = (uint32_t)time;
5521                                 qp->intr_count = hba->intr_count;
5522                                 break;
5523                         case 10: /* zero_q_stat */
5524                                 if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) {
5525                                         return (FC_BADCMD);
5526                                 }
5527                                 emlxs_sli4_zero_queue_stat(hba);
5528                                 break;
5529                         default:
5530                                 ret = FC_BADCMD;
5531                                 break;
5532                         }
5533                         break;
5534                 }
5535 
5536                 default:
5537 
5538                         ret = FC_INVALID_REQUEST;
5539                         break;
5540                 }
5541 
5542                 break;
5543 
5544         }
5545 
5546         case FC_PORT_INITIALIZE:
5547                 if (!(hba->flag & FC_ONLINE_MODE)) {
5548                         return (FC_OFFLINE);
5549                 }
5550                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5551                     "fca_port_manage: FC_PORT_INITIALIZE");
5552                 break;
5553 
5554         case FC_PORT_LOOPBACK:
5555                 if (!(hba->flag & FC_ONLINE_MODE)) {
5556                         return (FC_OFFLINE);
5557                 }
5558                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5559                     "fca_port_manage: FC_PORT_LOOPBACK");
5560                 break;
5561 
5562         case FC_PORT_BYPASS:
5563                 if (!(hba->flag & FC_ONLINE_MODE)) {
5564                         return (FC_OFFLINE);
5565                 }
5566                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5567                     "fca_port_manage: FC_PORT_BYPASS");
5568                 ret = FC_INVALID_REQUEST;
5569                 break;
5570 
5571         case FC_PORT_UNBYPASS:
5572                 if (!(hba->flag & FC_ONLINE_MODE)) {
5573                         return (FC_OFFLINE);
5574                 }
5575                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5576                     "fca_port_manage: FC_PORT_UNBYPASS");
5577                 ret = FC_INVALID_REQUEST;
5578                 break;
5579 
5580         case FC_PORT_GET_NODE_ID:
5581         {
5582                 fc_rnid_t *rnid;
5583 
5584                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5585                     "fca_port_manage: FC_PORT_GET_NODE_ID");
5586 
5587                 bzero(pm->pm_data_buf, pm->pm_data_len);
5588 
5589                 if (pm->pm_data_len < sizeof (fc_rnid_t)) {
5590                         ret = FC_NOMEM;
5591                         break;
5592                 }
5593 
5594                 rnid = (fc_rnid_t *)pm->pm_data_buf;
5595 
5596                 (void) snprintf((char *)rnid->global_id,
5597                     (sizeof (rnid->global_id)-1),
5598                     "%01x%01x%02x%02x%02x%02x%02x%02x%02x",
5599                     hba->wwpn.nameType, hba->wwpn.IEEEextMsn,
5600                     hba->wwpn.IEEEextLsb, hba->wwpn.IEEE[0],
5601                     hba->wwpn.IEEE[1], hba->wwpn.IEEE[2], hba->wwpn.IEEE[3],
5602                     hba->wwpn.IEEE[4], hba->wwpn.IEEE[5]);
5603 
5604                 rnid->unit_type  = RNID_HBA;
5605                 rnid->port_id    = port->did;
5606                 rnid->ip_version = RNID_IPV4;
5607 
5608                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5609                     "GET_NODE_ID: wwpn:       %s", rnid->global_id);
5610                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5611                     "GET_NODE_ID: unit_type:  0x%x", rnid->unit_type);
5612                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5613                     "GET_NODE_ID: port_id:    0x%x", rnid->port_id);
5614                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5615                     "GET_NODE_ID: num_attach: %d", rnid->num_attached);
5616                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5617                     "GET_NODE_ID: ip_version: 0x%x", rnid->ip_version);
5618                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5619                     "GET_NODE_ID: udp_port:   0x%x", rnid->udp_port);
5620                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5621                     "GET_NODE_ID: ip_addr:    %s", rnid->ip_addr);
5622                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5623                     "GET_NODE_ID: resv:       0x%x", rnid->specific_id_resv);
5624                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5625                     "GET_NODE_ID: topo_flags: 0x%x", rnid->topo_flags);
5626 
5627                 ret = FC_SUCCESS;
5628                 break;
5629         }
5630 
5631         case FC_PORT_SET_NODE_ID:
5632         {
5633                 fc_rnid_t *rnid;
5634 
5635                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5636                     "fca_port_manage: FC_PORT_SET_NODE_ID");
5637 
5638                 if (pm->pm_data_len < sizeof (fc_rnid_t)) {
5639                         ret = FC_NOMEM;
5640                         break;
5641                 }
5642 
5643                 rnid = (fc_rnid_t *)pm->pm_data_buf;
5644 
5645                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5646                     "SET_NODE_ID: wwpn:       %s", rnid->global_id);
5647                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5648                     "SET_NODE_ID: unit_type:  0x%x", rnid->unit_type);
5649                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5650                     "SET_NODE_ID: port_id:    0x%x", rnid->port_id);
5651                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5652                     "SET_NODE_ID: num_attach: %d", rnid->num_attached);
5653                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5654                     "SET_NODE_ID: ip_version: 0x%x", rnid->ip_version);
5655                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5656                     "SET_NODE_ID: udp_port:   0x%x", rnid->udp_port);
5657                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5658                     "SET_NODE_ID: ip_addr:    %s", rnid->ip_addr);
5659                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5660                     "SET_NODE_ID: resv:       0x%x", rnid->specific_id_resv);
5661                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5662                     "SET_NODE_ID: topo_flags: 0x%x", rnid->topo_flags);
5663 
5664                 ret = FC_SUCCESS;
5665                 break;
5666         }
5667 
5668 #ifdef S11
5669         case FC_PORT_GET_P2P_INFO:
5670         {
5671                 fc_fca_p2p_info_t       *p2p_info;
5672                 NODELIST                *ndlp;
5673 
5674                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5675                     "fca_port_manage: FC_PORT_GET_P2P_INFO");
5676 
5677                 bzero(pm->pm_data_buf, pm->pm_data_len);
5678 
5679                 if (pm->pm_data_len < sizeof (fc_fca_p2p_info_t)) {
5680                         ret = FC_NOMEM;
5681                         break;
5682                 }
5683 
5684                 p2p_info = (fc_fca_p2p_info_t *)pm->pm_data_buf;
5685 
5686                 if (hba->state >= FC_LINK_UP) {
5687                         if ((hba->topology == TOPOLOGY_PT_PT) &&
5688                             (hba->flag & FC_PT_TO_PT)) {
5689                                 p2p_info->fca_d_id = port->did;
5690                                 p2p_info->d_id = port->rdid;
5691 
5692                                 ndlp = emlxs_node_find_did(port,
5693                                     port->rdid, 1);
5694 
5695                                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5696                                     "FC_PORT_GET_P2P_INFO: fca_d_id: 0x%x, "
5697                                     "d_id: 0x%x, ndlp: 0x%p", port->did,
5698                                     port->rdid, ndlp);
5699                                 if (ndlp) {
5700                                         bcopy(&ndlp->nlp_portname,
5701                                             (caddr_t)&p2p_info->pwwn,
5702                                             sizeof (la_wwn_t));
5703                                         bcopy(&ndlp->nlp_nodename,
5704                                             (caddr_t)&p2p_info->nwwn,
5705                                             sizeof (la_wwn_t));
5706 
5707                                         ret = FC_SUCCESS;
5708                                         break;
5709 
5710                                 }
5711                         }
5712                 }
5713 
5714                 ret = FC_FAILURE;
5715                 break;
5716         }
5717 #endif /* S11 */
5718 
5719         default:
5720                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5721                     "fca_port_manage: code=%x", pm->pm_cmd_code);
5722                 ret = FC_INVALID_REQUEST;
5723                 break;
5724 
5725         }
5726 
5727         return (ret);
5728 
5729 } /* emlxs_fca_port_manage() */
5730 
5731 
5732 /*ARGSUSED*/
5733 static uint32_t
5734 emlxs_test(emlxs_hba_t *hba, uint32_t test_code, uint32_t args,
5735     uint32_t *arg)
5736 {
5737         uint32_t rval = 0;
5738         emlxs_port_t   *port = &PPORT;
5739 
5740         switch (test_code) {
5741 #ifdef TEST_SUPPORT
5742         case 1: /* SCSI underrun */
5743         {
5744                 hba->underrun_counter = (args)? arg[0]:1;
5745                 break;
5746         }
5747 #endif /* TEST_SUPPORT */
5748 
5749         default:
5750                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5751                     "test: Unsupported test code. (0x%x)", test_code);
5752                 rval = FC_INVALID_REQUEST;
5753         }
5754 
5755         return (rval);
5756 
5757 } /* emlxs_test() */
5758 
5759 
5760 /*
5761  * Given the device number, return the devinfo pointer or the ddiinst number.
5762  * Note: this routine must be successful on DDI_INFO_DEVT2INSTANCE even
5763  * before attach.
5764  *
5765  * Translate "dev_t" to a pointer to the associated "dev_info_t".
5766  */
5767 /*ARGSUSED*/
5768 static int
5769 emlxs_info(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result)
5770 {
5771         emlxs_hba_t     *hba;
5772         int32_t         ddiinst;
5773 
5774         ddiinst = getminor((dev_t)arg);
5775 
5776         switch (infocmd) {
5777         case DDI_INFO_DEVT2DEVINFO:
5778                 hba = ddi_get_soft_state(emlxs_soft_state, ddiinst);
5779                 if (hba)
5780                         *result = hba->dip;
5781                 else
5782                         *result = NULL;
5783                 break;
5784 
5785         case DDI_INFO_DEVT2INSTANCE:
5786                 *result = (void *)((unsigned long)ddiinst);
5787                 break;
5788 
5789         default:
5790                 return (DDI_FAILURE);
5791         }
5792 
5793         return (DDI_SUCCESS);
5794 
5795 } /* emlxs_info() */
5796 
5797 
5798 static int32_t
5799 emlxs_power(dev_info_t *dip, int32_t comp, int32_t level)
5800 {
5801         emlxs_hba_t     *hba;
5802         emlxs_port_t    *port;
5803         int32_t         ddiinst;
5804         int             rval = DDI_SUCCESS;
5805 
5806         ddiinst = ddi_get_instance(dip);
5807         hba = ddi_get_soft_state(emlxs_soft_state, ddiinst);
5808         port = &PPORT;
5809 
5810         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
5811             "fca_power: comp=%x level=%x", comp, level);
5812 
5813         if (hba == NULL || comp != EMLXS_PM_ADAPTER) {
5814                 return (DDI_FAILURE);
5815         }
5816 
5817         mutex_enter(&EMLXS_PM_LOCK);
5818 
5819         /* If we are already at the proper level then return success */
5820         if (hba->pm_level == level) {
5821                 mutex_exit(&EMLXS_PM_LOCK);
5822                 return (DDI_SUCCESS);
5823         }
5824 
5825         switch (level) {
5826         case EMLXS_PM_ADAPTER_UP:
5827 
5828                 /*
5829                  * If we are already in emlxs_attach,
5830                  * let emlxs_hba_attach take care of things
5831                  */
5832                 if (hba->pm_state & EMLXS_PM_IN_ATTACH) {
5833                         hba->pm_level = EMLXS_PM_ADAPTER_UP;
5834                         break;
5835                 }
5836 
5837                 /* Check if adapter is suspended */
5838                 if (hba->pm_state & EMLXS_PM_SUSPENDED) {
5839                         hba->pm_level = EMLXS_PM_ADAPTER_UP;
5840 
5841                         /* Try to resume the port */
5842                         rval = emlxs_hba_resume(dip);
5843 
5844                         if (rval != DDI_SUCCESS) {
5845                                 hba->pm_level = EMLXS_PM_ADAPTER_DOWN;
5846                         }
5847                         break;
5848                 }
5849 
5850                 /* Set adapter up */
5851                 hba->pm_level = EMLXS_PM_ADAPTER_UP;
5852                 break;
5853 
5854         case EMLXS_PM_ADAPTER_DOWN:
5855 
5856 
5857                 /*
5858                  * If we are already in emlxs_detach,
5859                  * let emlxs_hba_detach take care of things
5860                  */
5861                 if (hba->pm_state & EMLXS_PM_IN_DETACH) {
5862                         hba->pm_level = EMLXS_PM_ADAPTER_DOWN;
5863                         break;
5864                 }
5865 
5866                 /* Check if adapter is not suspended */
5867                 if (!(hba->pm_state & EMLXS_PM_SUSPENDED)) {
5868                         hba->pm_level = EMLXS_PM_ADAPTER_DOWN;
5869 
5870                         /* Try to suspend the port */
5871                         rval = emlxs_hba_suspend(dip);
5872 
5873                         if (rval != DDI_SUCCESS) {
5874                                 hba->pm_level = EMLXS_PM_ADAPTER_UP;
5875                         }
5876 
5877                         break;
5878                 }
5879 
5880                 /* Set adapter down */
5881                 hba->pm_level = EMLXS_PM_ADAPTER_DOWN;
5882                 break;
5883 
5884         default:
5885                 rval = DDI_FAILURE;
5886                 break;
5887 
5888         }
5889 
5890         mutex_exit(&EMLXS_PM_LOCK);
5891 
5892         return (rval);
5893 
5894 } /* emlxs_power() */
5895 
5896 
5897 #ifdef EMLXS_I386
5898 #ifdef S11
5899 /*
5900  * quiesce(9E) entry point.
5901  *
5902  * This function is called when the system is single-thread at hight PIL
5903  * with preemption disabled. Therefore, this function must not be blocked.
5904  *
5905  * This function returns DDI_SUCCESS on success, or DDI_FAILURE on failure.
5906  * DDI_FAILURE indicates an error condition and should almost never happen.
5907  */
5908 static int
5909 emlxs_quiesce(dev_info_t *dip)
5910 {
5911         emlxs_hba_t     *hba;
5912         emlxs_port_t    *port;
5913         int32_t         ddiinst;
5914         int             rval = DDI_SUCCESS;
5915 
5916         ddiinst = ddi_get_instance(dip);
5917         hba = ddi_get_soft_state(emlxs_soft_state, ddiinst);
5918         port = &PPORT;
5919 
5920         if (hba == NULL || port == NULL) {
5921                 return (DDI_FAILURE);
5922         }
5923 
5924         /* The fourth arg 1 indicates the call is from quiesce */
5925         if (EMLXS_SLI_HBA_RESET(hba, 1, 1, 1) == 0) {
5926                 return (rval);
5927         } else {
5928                 return (DDI_FAILURE);
5929         }
5930 
5931 } /* emlxs_quiesce */
5932 #endif /* S11 */
5933 #endif /* EMLXS_I386 */
5934 
5935 
5936 static int
5937 emlxs_open(dev_t *dev_p, int32_t flag, int32_t otype, cred_t *cred_p)
5938 {
5939         emlxs_hba_t     *hba;
5940         emlxs_port_t    *port;
5941         int             ddiinst;
5942 
5943         ddiinst = getminor(*dev_p);
5944         hba = ddi_get_soft_state(emlxs_soft_state, ddiinst);
5945 
5946         if (hba == NULL) {
5947                 return (ENXIO);
5948         }
5949 
5950         port = &PPORT;
5951 
5952         if (hba->pm_state & EMLXS_PM_SUSPENDED) {
5953                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_ioctl_detail_msg,
5954                     "open failed: Driver suspended.");
5955                 return (ENXIO);
5956         }
5957 
5958         if (otype != OTYP_CHR) {
5959                 return (EINVAL);
5960         }
5961 
5962         if (drv_priv(cred_p)) {
5963                 return (EPERM);
5964         }
5965 
5966         mutex_enter(&EMLXS_IOCTL_LOCK);
5967 
5968         if (hba->ioctl_flags & EMLXS_OPEN_EXCLUSIVE) {
5969                 mutex_exit(&EMLXS_IOCTL_LOCK);
5970                 return (EBUSY);
5971         }
5972 
5973         if (flag & FEXCL) {
5974                 if (hba->ioctl_flags & EMLXS_OPEN) {
5975                         mutex_exit(&EMLXS_IOCTL_LOCK);
5976                         return (EBUSY);
5977                 }
5978 
5979                 hba->ioctl_flags |= EMLXS_OPEN_EXCLUSIVE;
5980         }
5981 
5982         hba->ioctl_flags |= EMLXS_OPEN;
5983 
5984         mutex_exit(&EMLXS_IOCTL_LOCK);
5985 
5986         return (0);
5987 
5988 } /* emlxs_open() */
5989 
5990 
5991 /*ARGSUSED*/
5992 static int
5993 emlxs_close(dev_t dev, int32_t flag, int32_t otype, cred_t *cred_p)
5994 {
5995         emlxs_hba_t     *hba;
5996         int             ddiinst;
5997 
5998         ddiinst = getminor(dev);
5999         hba = ddi_get_soft_state(emlxs_soft_state, ddiinst);
6000 
6001         if (hba == NULL) {
6002                 return (ENXIO);
6003         }
6004 
6005         if (otype != OTYP_CHR) {
6006                 return (EINVAL);
6007         }
6008 
6009         mutex_enter(&EMLXS_IOCTL_LOCK);
6010 
6011         if (!(hba->ioctl_flags & EMLXS_OPEN)) {
6012                 mutex_exit(&EMLXS_IOCTL_LOCK);
6013                 return (ENODEV);
6014         }
6015 
6016         hba->ioctl_flags &= ~EMLXS_OPEN;
6017         hba->ioctl_flags &= ~EMLXS_OPEN_EXCLUSIVE;
6018 
6019         mutex_exit(&EMLXS_IOCTL_LOCK);
6020 
6021         return (0);
6022 
6023 } /* emlxs_close() */
6024 
6025 
6026 /*ARGSUSED*/
6027 static int
6028 emlxs_ioctl(dev_t dev, int32_t cmd, intptr_t arg, int32_t mode,
6029     cred_t *cred_p, int32_t *rval_p)
6030 {
6031         emlxs_hba_t     *hba;
6032         emlxs_port_t    *port;
6033         int             rval = 0;       /* return code */
6034         int             ddiinst;
6035 
6036         ddiinst = getminor(dev);
6037         hba = ddi_get_soft_state(emlxs_soft_state, ddiinst);
6038 
6039         if (hba == NULL) {
6040                 return (ENXIO);
6041         }
6042 
6043         port = &PPORT;
6044 
6045         if (hba->pm_state & EMLXS_PM_SUSPENDED) {
6046                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_ioctl_detail_msg,
6047                     "ioctl failed: Driver suspended.");
6048 
6049                 return (ENXIO);
6050         }
6051 
6052         mutex_enter(&EMLXS_IOCTL_LOCK);
6053         if (!(hba->ioctl_flags & EMLXS_OPEN)) {
6054                 mutex_exit(&EMLXS_IOCTL_LOCK);
6055                 return (ENXIO);
6056         }
6057         mutex_exit(&EMLXS_IOCTL_LOCK);
6058 
6059 #ifdef IDLE_TIMER
6060         emlxs_pm_busy_component(hba);
6061 #endif  /* IDLE_TIMER */
6062 
6063         switch (cmd) {
6064         case EMLXS_DFC_COMMAND:
6065                 rval = emlxs_dfc_manage(hba, (void *)arg, mode);
6066                 break;
6067 
6068         default:
6069                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_ioctl_detail_msg,
6070                     "ioctl: Invalid command received. cmd=%x", cmd);
6071                 rval = EINVAL;
6072         }
6073 
6074 done:
6075         return (rval);
6076 
6077 } /* emlxs_ioctl() */
6078 
6079 
6080 
6081 /*
6082  *
6083  *      Device Driver Common Routines
6084  *
6085  */
6086 
6087 /* EMLXS_PM_LOCK must be held for this call */
6088 static int
6089 emlxs_hba_resume(dev_info_t *dip)
6090 {
6091         emlxs_hba_t     *hba;
6092         emlxs_port_t    *port;
6093         int             ddiinst;
6094 
6095         ddiinst = ddi_get_instance(dip);
6096         hba = ddi_get_soft_state(emlxs_soft_state, ddiinst);
6097         port = &PPORT;
6098 
6099         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_resume_msg, NULL);
6100 
6101         if (!(hba->pm_state & EMLXS_PM_SUSPENDED)) {
6102                 return (DDI_SUCCESS);
6103         }
6104 
6105         hba->pm_state &= ~EMLXS_PM_SUSPENDED;
6106 
6107         /* Re-enable the physical port on this HBA */
6108         port->flag |= EMLXS_PORT_ENABLED;
6109 
6110         /* Take the adapter online */
6111         if (emlxs_power_up(hba)) {
6112                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_resume_failed_msg,
6113                     "Unable to take adapter online.");
6114 
6115                 hba->pm_state |= EMLXS_PM_SUSPENDED;
6116 
6117                 return (DDI_FAILURE);
6118         }
6119 
6120         return (DDI_SUCCESS);
6121 
6122 } /* emlxs_hba_resume() */
6123 
6124 
6125 /* EMLXS_PM_LOCK must be held for this call */
6126 static int
6127 emlxs_hba_suspend(dev_info_t *dip)
6128 {
6129         emlxs_hba_t     *hba;
6130         emlxs_port_t    *port;
6131         int             ddiinst;
6132 
6133         ddiinst = ddi_get_instance(dip);
6134         hba = ddi_get_soft_state(emlxs_soft_state, ddiinst);
6135         port = &PPORT;
6136 
6137         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_suspend_msg, NULL);
6138 
6139         if (hba->pm_state & EMLXS_PM_SUSPENDED) {
6140                 return (DDI_SUCCESS);
6141         }
6142 
6143         hba->pm_state |= EMLXS_PM_SUSPENDED;
6144 
6145         /* Take the adapter offline */
6146         if (emlxs_power_down(hba)) {
6147                 hba->pm_state &= ~EMLXS_PM_SUSPENDED;
6148 
6149                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_suspend_failed_msg,
6150                     "Unable to take adapter offline.");
6151 
6152                 return (DDI_FAILURE);
6153         }
6154 
6155         return (DDI_SUCCESS);
6156 
6157 } /* emlxs_hba_suspend() */
6158 
6159 
6160 
6161 static void
6162 emlxs_lock_init(emlxs_hba_t *hba)
6163 {
6164         emlxs_port_t    *port = &PPORT;
6165         uint32_t        i;
6166 
6167         /* Initialize the power management */
6168         mutex_init(&EMLXS_PM_LOCK, NULL, MUTEX_DRIVER,
6169             DDI_INTR_PRI(hba->intr_arg));
6170 
6171         mutex_init(&EMLXS_TIMER_LOCK, NULL, MUTEX_DRIVER,
6172             DDI_INTR_PRI(hba->intr_arg));
6173 
6174         cv_init(&hba->timer_lock_cv, NULL, CV_DRIVER, NULL);
6175 
6176         mutex_init(&EMLXS_PORT_LOCK, NULL, MUTEX_DRIVER,
6177             DDI_INTR_PRI(hba->intr_arg));
6178 
6179         mutex_init(&EMLXS_MBOX_LOCK, NULL, MUTEX_DRIVER,
6180             DDI_INTR_PRI(hba->intr_arg));
6181 
6182         cv_init(&EMLXS_MBOX_CV, NULL, CV_DRIVER, NULL);
6183 
6184         mutex_init(&EMLXS_LINKUP_LOCK, NULL, MUTEX_DRIVER,
6185             DDI_INTR_PRI(hba->intr_arg));
6186 
6187         cv_init(&EMLXS_LINKUP_CV, NULL, CV_DRIVER, NULL);
6188 
6189         mutex_init(&EMLXS_TX_CHANNEL_LOCK, NULL, MUTEX_DRIVER,
6190             DDI_INTR_PRI(hba->intr_arg));
6191 
6192         for (i = 0; i < MAX_RINGS; i++) {
6193                 mutex_init(&EMLXS_CMD_RING_LOCK(i), NULL, MUTEX_DRIVER,
6194                     DDI_INTR_PRI(hba->intr_arg));
6195         }
6196 
6197 
6198         for (i = 0; i < EMLXS_MAX_WQS; i++) {
6199                 mutex_init(&EMLXS_QUE_LOCK(i), NULL, MUTEX_DRIVER,
6200                     DDI_INTR_PRI(hba->intr_arg));
6201         }
6202 
6203         mutex_init(&EMLXS_MSIID_LOCK, NULL, MUTEX_DRIVER,
6204             DDI_INTR_PRI(hba->intr_arg));
6205 
6206         mutex_init(&EMLXS_FCTAB_LOCK, NULL, MUTEX_DRIVER,
6207             DDI_INTR_PRI(hba->intr_arg));
6208 
6209         mutex_init(&EMLXS_MEMGET_LOCK, NULL, MUTEX_DRIVER,
6210             DDI_INTR_PRI(hba->intr_arg));
6211 
6212         mutex_init(&EMLXS_MEMPUT_LOCK, NULL, MUTEX_DRIVER,
6213             DDI_INTR_PRI(hba->intr_arg));
6214 
6215         mutex_init(&EMLXS_IOCTL_LOCK, NULL, MUTEX_DRIVER,
6216             DDI_INTR_PRI(hba->intr_arg));
6217 
6218 #ifdef DUMP_SUPPORT
6219         mutex_init(&EMLXS_DUMP_LOCK, NULL, MUTEX_DRIVER,
6220             DDI_INTR_PRI(hba->intr_arg));
6221 #endif /* DUMP_SUPPORT */
6222 
6223         mutex_init(&EMLXS_SPAWN_LOCK, NULL, MUTEX_DRIVER,
6224             DDI_INTR_PRI(hba->intr_arg));
6225 
6226         /* Create per port locks */
6227         for (i = 0; i < MAX_VPORTS; i++) {
6228                 port = &VPORT(i);
6229 
6230                 rw_init(&port->node_rwlock, NULL, RW_DRIVER, NULL);
6231 
6232                 if (i == 0) {
6233                         mutex_init(&EMLXS_PKT_LOCK, NULL, MUTEX_DRIVER,
6234                             DDI_INTR_PRI(hba->intr_arg));
6235 
6236                         cv_init(&EMLXS_PKT_CV, NULL, CV_DRIVER, NULL);
6237 
6238                         mutex_init(&EMLXS_UB_LOCK, NULL, MUTEX_DRIVER,
6239                             DDI_INTR_PRI(hba->intr_arg));
6240                 } else {
6241                         mutex_init(&EMLXS_PKT_LOCK, NULL, MUTEX_DRIVER,
6242                             DDI_INTR_PRI(hba->intr_arg));
6243 
6244                         cv_init(&EMLXS_PKT_CV, NULL, CV_DRIVER, NULL);
6245 
6246                         mutex_init(&EMLXS_UB_LOCK, NULL, MUTEX_DRIVER,
6247                             DDI_INTR_PRI(hba->intr_arg));
6248                 }
6249         }
6250 
6251         return;
6252 
6253 } /* emlxs_lock_init() */
6254 
6255 
6256 
6257 static void
6258 emlxs_lock_destroy(emlxs_hba_t *hba)
6259 {
6260         emlxs_port_t    *port = &PPORT;
6261         uint32_t        i;
6262 
6263         mutex_destroy(&EMLXS_TIMER_LOCK);
6264         cv_destroy(&hba->timer_lock_cv);
6265 
6266         mutex_destroy(&EMLXS_PORT_LOCK);
6267 
6268         cv_destroy(&EMLXS_MBOX_CV);
6269         cv_destroy(&EMLXS_LINKUP_CV);
6270 
6271         mutex_destroy(&EMLXS_LINKUP_LOCK);
6272         mutex_destroy(&EMLXS_MBOX_LOCK);
6273 
6274         mutex_destroy(&EMLXS_TX_CHANNEL_LOCK);
6275 
6276         for (i = 0; i < MAX_RINGS; i++) {
6277                 mutex_destroy(&EMLXS_CMD_RING_LOCK(i));
6278         }
6279 
6280         for (i = 0; i < EMLXS_MAX_WQS; i++) {
6281                 mutex_destroy(&EMLXS_QUE_LOCK(i));
6282         }
6283 
6284         mutex_destroy(&EMLXS_MSIID_LOCK);
6285 
6286         mutex_destroy(&EMLXS_FCTAB_LOCK);
6287         mutex_destroy(&EMLXS_MEMGET_LOCK);
6288         mutex_destroy(&EMLXS_MEMPUT_LOCK);
6289         mutex_destroy(&EMLXS_IOCTL_LOCK);
6290         mutex_destroy(&EMLXS_SPAWN_LOCK);
6291         mutex_destroy(&EMLXS_PM_LOCK);
6292 
6293 #ifdef DUMP_SUPPORT
6294         mutex_destroy(&EMLXS_DUMP_LOCK);
6295 #endif /* DUMP_SUPPORT */
6296 
6297         /* Destroy per port locks */
6298         for (i = 0; i < MAX_VPORTS; i++) {
6299                 port = &VPORT(i);
6300                 rw_destroy(&port->node_rwlock);
6301                 mutex_destroy(&EMLXS_PKT_LOCK);
6302                 cv_destroy(&EMLXS_PKT_CV);
6303                 mutex_destroy(&EMLXS_UB_LOCK);
6304         }
6305 
6306         return;
6307 
6308 } /* emlxs_lock_destroy() */
6309 
6310 
6311 /* init_flag values */
6312 #define ATTACH_SOFT_STATE       0x00000001
6313 #define ATTACH_FCA_TRAN         0x00000002
6314 #define ATTACH_HBA              0x00000004
6315 #define ATTACH_LOG              0x00000008
6316 #define ATTACH_MAP_BUS          0x00000010
6317 #define ATTACH_INTR_INIT        0x00000020
6318 #define ATTACH_PROP             0x00000040
6319 #define ATTACH_LOCK             0x00000080
6320 #define ATTACH_THREAD           0x00000100
6321 #define ATTACH_INTR_ADD         0x00000200
6322 #define ATTACH_ONLINE           0x00000400
6323 #define ATTACH_NODE             0x00000800
6324 #define ATTACH_FCT              0x00001000
6325 #define ATTACH_FCA              0x00002000
6326 #define ATTACH_KSTAT            0x00004000
6327 #define ATTACH_DHCHAP           0x00008000
6328 #define ATTACH_FM               0x00010000
6329 #define ATTACH_MAP_SLI          0x00020000
6330 #define ATTACH_SPAWN            0x00040000
6331 #define ATTACH_EVENTS           0x00080000
6332 
6333 static void
6334 emlxs_driver_remove(dev_info_t *dip, uint32_t init_flag, uint32_t failed)
6335 {
6336         emlxs_hba_t     *hba = NULL;
6337         int             ddiinst;
6338 
6339         ddiinst = ddi_get_instance(dip);
6340 
6341         if (init_flag & ATTACH_HBA) {
6342                 hba = ddi_get_soft_state(emlxs_soft_state, ddiinst);
6343 
6344                 if (init_flag & ATTACH_SPAWN) {
6345                         emlxs_thread_spawn_destroy(hba);
6346                 }
6347 
6348                 if (init_flag & ATTACH_EVENTS) {
6349                         (void) emlxs_event_queue_destroy(hba);
6350                 }
6351 
6352                 if (init_flag & ATTACH_ONLINE) {
6353                         (void) emlxs_offline(hba, 1);
6354                 }
6355 
6356                 if (init_flag & ATTACH_INTR_ADD) {
6357                         (void) EMLXS_INTR_REMOVE(hba);
6358                 }
6359 #ifdef SFCT_SUPPORT
6360                 if (init_flag & ATTACH_FCT) {
6361                         emlxs_fct_detach(hba);
6362                         emlxs_fct_modclose();
6363                 }
6364 #endif /* SFCT_SUPPORT */
6365 
6366 #ifdef DHCHAP_SUPPORT
6367                 if (init_flag & ATTACH_DHCHAP) {
6368                         emlxs_dhc_detach(hba);
6369                 }
6370 #endif /* DHCHAP_SUPPORT */
6371 
6372                 if (init_flag & ATTACH_KSTAT) {
6373                         kstat_delete(hba->kstat);
6374                 }
6375 
6376                 if (init_flag & ATTACH_FCA) {
6377                         emlxs_fca_detach(hba);
6378                 }
6379 
6380                 if (init_flag & ATTACH_NODE) {
6381                         (void) ddi_remove_minor_node(hba->dip, "devctl");
6382                 }
6383 
6384                 if (init_flag & ATTACH_THREAD) {
6385                         emlxs_thread_destroy(&hba->iodone_thread);
6386                 }
6387 
6388                 if (init_flag & ATTACH_PROP) {
6389                         (void) ddi_prop_remove_all(hba->dip);
6390                 }
6391 
6392                 if (init_flag & ATTACH_LOCK) {
6393                         emlxs_lock_destroy(hba);
6394                 }
6395 
6396                 if (init_flag & ATTACH_INTR_INIT) {
6397                         (void) EMLXS_INTR_UNINIT(hba);
6398                 }
6399 
6400                 if (init_flag & ATTACH_MAP_BUS) {
6401                         emlxs_unmap_bus(hba);
6402                 }
6403 
6404                 if (init_flag & ATTACH_MAP_SLI) {
6405                         EMLXS_SLI_UNMAP_HDW(hba);
6406                 }
6407 
6408 #ifdef FMA_SUPPORT
6409                 if (init_flag & ATTACH_FM) {
6410                         emlxs_fm_fini(hba);
6411                 }
6412 #endif  /* FMA_SUPPORT */
6413 
6414                 if (init_flag & ATTACH_LOG) {
6415                         emlxs_msg_log_destroy(hba);
6416                 }
6417 
6418                 if (init_flag & ATTACH_FCA_TRAN) {
6419                         (void) ddi_set_driver_private(hba->dip, NULL);
6420                         kmem_free(hba->fca_tran, sizeof (fc_fca_tran_t));
6421                         hba->fca_tran = NULL;
6422                 }
6423 
6424                 if (init_flag & ATTACH_HBA) {
6425                         emlxs_device.log[hba->emlxinst] = 0;
6426                         emlxs_device.hba[hba->emlxinst] =
6427                             (emlxs_hba_t *)((unsigned long)((failed) ? -1 : 0));
6428 #ifdef DUMP_SUPPORT
6429                         emlxs_device.dump_txtfile[hba->emlxinst] = 0;
6430                         emlxs_device.dump_dmpfile[hba->emlxinst] = 0;
6431                         emlxs_device.dump_ceefile[hba->emlxinst] = 0;
6432 #endif /* DUMP_SUPPORT */
6433 
6434                 }
6435         }
6436 
6437         if (init_flag & ATTACH_SOFT_STATE) {
6438                 (void) ddi_soft_state_free(emlxs_soft_state, ddiinst);
6439         }
6440 
6441         return;
6442 
6443 } /* emlxs_driver_remove() */
6444 
6445 
6446 /* This determines which ports will be initiator mode */
6447 static uint32_t
6448 emlxs_fca_init(emlxs_hba_t *hba)
6449 {
6450         emlxs_port_t    *port = &PPORT;
6451 
6452         /* Check if SFS present */
6453         if (((void *)MODSYM(fc_fca_init) == NULL) ||
6454             ((void *)MODSYM(fc_fca_attach) == NULL)) {
6455                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
6456                     "SFS not present.");
6457                 return (1);
6458         }
6459 
6460         /* Check if our SFS driver interface matches the current SFS stack */
6461         if (MODSYM(fc_fca_attach) (hba->dip, hba->fca_tran) != DDI_SUCCESS) {
6462                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
6463                     "SFS/FCA version mismatch. FCA=0x%x",
6464                     hba->fca_tran->fca_version);
6465                 return (1);
6466         }
6467 
6468         return (0);
6469 
6470 } /* emlxs_fca_init() */
6471 
6472 
6473 /* This determines which ports will be initiator or target mode */
6474 static void
6475 emlxs_mode_init(emlxs_hba_t *hba)
6476 {
6477         emlxs_port_t    *port = &PPORT;
6478         emlxs_config_t *cfg = &CFG;
6479         emlxs_port_t    *vport;
6480         uint32_t        i;
6481         uint32_t        mode_mask;
6482 
6483         /* Initialize mode masks */
6484         (void) emlxs_mode_init_masks(hba);
6485 
6486         if (!(port->mode_mask & MODE_INITIATOR)) {
6487                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
6488                     "Initiator mode not enabled.");
6489 
6490 #ifdef SFCT_SUPPORT
6491                 /* Disable dynamic target mode */
6492                 cfg[CFG_DTM_ENABLE].current = 0;
6493 #endif /* SFCT_SUPPORT */
6494 
6495                 goto done1;
6496         }
6497 
6498         /* Try to initialize fca interface */
6499         if (emlxs_fca_init(hba) != 0) {
6500                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
6501                     "Initiator mode disabled.");
6502 
6503                 /* Disable initiator mode */
6504                 port->mode_mask &= ~MODE_INITIATOR;
6505 
6506 #ifdef SFCT_SUPPORT
6507                 /* Disable dynamic target mode */
6508                 cfg[CFG_DTM_ENABLE].current = 0;
6509 #endif /* SFCT_SUPPORT */
6510 
6511                 goto done1;
6512         }
6513 
6514         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
6515             "Initiator mode enabled.");
6516 
6517 done1:
6518 
6519 #ifdef SFCT_SUPPORT
6520         if (!(port->mode_mask & MODE_TARGET)) {
6521                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
6522                     "Target mode not enabled.");
6523 
6524                 /* Disable target modes */
6525                 cfg[CFG_DTM_ENABLE].current = 0;
6526                 cfg[CFG_TARGET_MODE].current = 0;
6527 
6528                 goto done2;
6529         }
6530 
6531         /* Try to open the COMSTAR module */
6532         if (emlxs_fct_modopen() != 0) {
6533                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
6534                     "Target mode disabled.");
6535 
6536                 /* Disable target modes */
6537                 port->mode_mask &= ~MODE_TARGET;
6538                 cfg[CFG_DTM_ENABLE].current = 0;
6539                 cfg[CFG_TARGET_MODE].current = 0;
6540 
6541                 goto done2;
6542         }
6543 
6544         /* Try to initialize fct interface */
6545         if (emlxs_fct_init(hba) != 0) {
6546                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
6547                     "Target mode disabled.");
6548 
6549                 /* Disable target modes */
6550                 port->mode_mask &= ~MODE_TARGET;
6551                 cfg[CFG_DTM_ENABLE].current = 0;
6552                 cfg[CFG_TARGET_MODE].current = 0;
6553 
6554                 goto done2;
6555         }
6556 
6557         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
6558             "Target mode enabled.");
6559 
6560 done2:
6561         /* Adjust target mode parameter flags */
6562         if (cfg[CFG_DTM_ENABLE].current) {
6563                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
6564                     "Dynamic target mode enabled.");
6565 
6566                 cfg[CFG_TARGET_MODE].flags |= PARM_DYNAMIC;
6567         } else {
6568                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
6569                     "Dynamic target mode disabled.");
6570 
6571                 cfg[CFG_TARGET_MODE].flags &= ~PARM_DYNAMIC;
6572         }
6573 #endif /* SFCT_SUPPORT */
6574 
6575         /* Now set port flags */
6576         mutex_enter(&EMLXS_PORT_LOCK);
6577 
6578         /* Set flags for physical port */
6579         if (port->mode_mask & MODE_INITIATOR) {
6580                 port->flag |= EMLXS_INI_ENABLED;
6581         } else {
6582                 port->flag &= ~EMLXS_INI_ENABLED;
6583         }
6584 
6585         if (port->mode_mask & MODE_TARGET) {
6586                 port->flag |= EMLXS_TGT_ENABLED;
6587         } else {
6588                 port->flag &= ~EMLXS_TGT_ENABLED;
6589         }
6590 
6591         for (i = 1; i < MAX_VPORTS; i++) {
6592                 vport = &VPORT(i);
6593 
6594                 /* Physical port mask has only allowable bits */
6595                 mode_mask = vport->mode_mask & port->mode_mask;
6596 
6597                 /* Set flags for physical port */
6598                 if (mode_mask & MODE_INITIATOR) {
6599                         vport->flag |= EMLXS_INI_ENABLED;
6600                 } else {
6601                         vport->flag &= ~EMLXS_INI_ENABLED;
6602                 }
6603 
6604                 if (mode_mask & MODE_TARGET) {
6605                         vport->flag |= EMLXS_TGT_ENABLED;
6606                 } else {
6607                         vport->flag &= ~EMLXS_TGT_ENABLED;
6608                 }
6609         }
6610 
6611         /* Set initial driver mode */
6612         emlxs_mode_set(hba);
6613 
6614         mutex_exit(&EMLXS_PORT_LOCK);
6615 
6616         /* Recheck possible mode dependent parameters */
6617         /* in case conditions have changed. */
6618         if (port->mode != MODE_NONE) {
6619                 for (i = 0; i < NUM_CFG_PARAM; i++) {
6620                         cfg = &hba->config[i];
6621                         cfg->current = emlxs_check_parm(hba, i, cfg->current);
6622                 }
6623         }
6624 
6625         return;
6626 
6627 } /* emlxs_mode_init() */
6628 
6629 
6630 /* This must be called while holding the EMLXS_PORT_LOCK */
6631 extern void
6632 emlxs_mode_set(emlxs_hba_t *hba)
6633 {
6634         emlxs_port_t    *port = &PPORT;
6635 #ifdef SFCT_SUPPORT
6636         emlxs_config_t *cfg = &CFG;
6637 #endif /* SFCT_SUPPORT */
6638         emlxs_port_t    *vport;
6639         uint32_t        i;
6640         uint32_t cfg_tgt_mode = 0;
6641 
6642         /* mutex_enter(&EMLXS_PORT_LOCK); */
6643 
6644 #ifdef SFCT_SUPPORT
6645         cfg_tgt_mode = cfg[CFG_TARGET_MODE].current;
6646 #endif /* SFCT_SUPPORT */
6647 
6648         /* Initiator mode requested */
6649         if (!cfg_tgt_mode) {
6650                 for (i = 0; i < MAX_VPORTS; i++) {
6651                         vport = &VPORT(i);
6652                         vport->mode = (vport->flag & EMLXS_INI_ENABLED)?
6653                             MODE_INITIATOR:MODE_NONE;
6654                 }
6655 #ifdef SFCT_SUPPORT
6656         /* Target mode requested */
6657         } else  {
6658                 for (i = 0; i < MAX_VPORTS; i++) {
6659                         vport = &VPORT(i);
6660                         vport->mode = (vport->flag & EMLXS_TGT_ENABLED)?
6661                             MODE_TARGET:MODE_NONE;
6662                 }
6663 #endif /* SFCT_SUPPORT */
6664         }
6665 
6666         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_init_debug_msg,
6667             "MODE: %s", emlxs_mode_xlate(port->mode));
6668 
6669         /* mutex_exit(&EMLXS_PORT_LOCK); */
6670 
6671         return;
6672 
6673 } /* emlxs_mode_set() */
6674 
6675 
6676 static void
6677 emlxs_mode_init_masks(emlxs_hba_t *hba)
6678 {
6679         emlxs_port_t *port = &PPORT;
6680         emlxs_port_t *vport;
6681         uint32_t        i;
6682 
6683 #ifdef SFCT_SUPPORT
6684         emlxs_config_t  *cfg = &CFG;
6685         uint32_t        vport_mode_mask;
6686         uint32_t        cfg_vport_mode_mask;
6687         uint32_t        mode_mask;
6688         char            string[256];
6689 
6690         port->mode_mask = 0;
6691 
6692         if (!cfg[CFG_TARGET_MODE].current ||
6693             cfg[CFG_DTM_ENABLE].current) {
6694                 port->mode_mask |= MODE_INITIATOR;
6695         }
6696 
6697         if (cfg[CFG_TARGET_MODE].current ||
6698             cfg[CFG_DTM_ENABLE].current) {
6699                 port->mode_mask |= MODE_TARGET;
6700         }
6701 
6702         /* Physical port mask has only allowable bits */
6703         vport_mode_mask = port->mode_mask;
6704         cfg_vport_mode_mask = cfg[CFG_VPORT_MODE_MASK].current;
6705 
6706         /* Check dynamic target mode value for virtual ports */
6707         if (cfg[CFG_DTM_ENABLE].current == 0) {
6708                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
6709                     "%s = 0: Virtual target ports are not supported.",
6710                     cfg[CFG_DTM_ENABLE].string);
6711 
6712                 vport_mode_mask &= ~MODE_TARGET;
6713         }
6714 
6715         cfg_vport_mode_mask &= vport_mode_mask;
6716 
6717         if (cfg[CFG_VPORT_MODE_MASK].current != cfg_vport_mode_mask) {
6718                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
6719                     "%s: Changing 0x%x --> 0x%x",
6720                     cfg[CFG_VPORT_MODE_MASK].string,
6721                     cfg[CFG_VPORT_MODE_MASK].current,
6722                     cfg_vport_mode_mask);
6723 
6724                 cfg[CFG_VPORT_MODE_MASK].current = cfg_vport_mode_mask;
6725         }
6726 
6727         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
6728             "pport-mode-mask: %s", emlxs_mode_xlate(port->mode_mask));
6729 
6730         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
6731             "vport-mode-mask: %s", emlxs_mode_xlate(cfg_vport_mode_mask));
6732 
6733         for (i = 1; i < MAX_VPORTS; i++) {
6734                 vport = &VPORT(i);
6735 
6736                 (void) snprintf(string, sizeof (string),
6737                     "%s%d-vport%d-mode-mask", DRIVER_NAME, hba->ddiinst, i);
6738 
6739                 mode_mask = (uint32_t)ddi_prop_get_int(DDI_DEV_T_ANY,
6740                     (void *)hba->dip, DDI_PROP_DONTPASS, string,
6741                     cfg_vport_mode_mask);
6742 
6743                 vport->mode_mask = mode_mask & vport_mode_mask;
6744 
6745                 if (vport->mode_mask != cfg_vport_mode_mask) {
6746                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
6747                             "vport%d-mode-mask: %s",
6748                             i, emlxs_mode_xlate(vport->mode_mask));
6749                 }
6750         }
6751 #else
6752         port->mode_mask = MODE_INITIATOR;
6753         for (i = 1; i < MAX_VPORTS; i++) {
6754                 vport = &VPORT(i);
6755                 vport->mode_mask = MODE_INITIATOR;
6756         }
6757 #endif /* SFCT_SUPPORT */
6758 
6759         return;
6760 
6761 } /* emlxs_mode_init_masks() */
6762 
6763 
6764 static void
6765 emlxs_fca_attach(emlxs_hba_t *hba)
6766 {
6767         emlxs_port_t    *port;
6768         uint32_t        i;
6769 
6770         /* Update our transport structure */
6771         hba->fca_tran->fca_iblock  = (ddi_iblock_cookie_t *)&hba->intr_arg;
6772         hba->fca_tran->fca_cmd_max = hba->io_throttle;
6773 
6774         for (i = 0; i < MAX_VPORTS; i++) {
6775                 port = &VPORT(i);
6776                 port->ub_count       = EMLXS_UB_TOKEN_OFFSET;
6777                 port->ub_pool        = NULL;
6778         }
6779 
6780 #if (EMLXS_MODREV >= EMLXS_MODREV5)
6781         bcopy((caddr_t)&hba->wwpn, (caddr_t)&hba->fca_tran->fca_perm_pwwn,
6782             sizeof (NAME_TYPE));
6783 #endif /* >= EMLXS_MODREV5 */
6784 
6785         return;
6786 
6787 } /* emlxs_fca_attach() */
6788 
6789 
6790 static void
6791 emlxs_fca_detach(emlxs_hba_t *hba)
6792 {
6793         emlxs_port_t    *port = &PPORT;
6794         uint32_t        i;
6795         emlxs_port_t    *vport;
6796 
6797         if (!(port->flag & EMLXS_INI_ENABLED)) {
6798                 return;
6799         }
6800 
6801         if ((void *)MODSYM(fc_fca_detach) != NULL) {
6802                 MODSYM(fc_fca_detach)(hba->dip);
6803         }
6804 
6805         /* Disable INI mode for all ports */
6806         for (i = 0; i < MAX_VPORTS; i++) {
6807                 vport = &VPORT(i);
6808                 vport->flag &= ~EMLXS_INI_ENABLED;
6809         }
6810 
6811         return;
6812 
6813 } /* emlxs_fca_detach() */
6814 
6815 
6816 static void
6817 emlxs_drv_banner(emlxs_hba_t *hba)
6818 {
6819         emlxs_port_t    *port = &PPORT;
6820         uint32_t        i;
6821         char            sli_mode[16];
6822         char            msi_mode[16];
6823         char            npiv_mode[16];
6824         emlxs_vpd_t     *vpd = &VPD;
6825         uint8_t         *wwpn;
6826         uint8_t         *wwnn;
6827         uint32_t        fw_show = 0;
6828 
6829         /* Display firmware library one time for all driver instances */
6830         mutex_enter(&emlxs_device.lock);
6831         if (!(emlxs_instance_flag & EMLXS_FW_SHOW)) {
6832                 emlxs_instance_flag |= EMLXS_FW_SHOW;
6833                 fw_show = 1;
6834         }
6835         mutex_exit(&emlxs_device.lock);
6836 
6837         if (fw_show) {
6838                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg, "%s",
6839                     emlxs_copyright);
6840                 emlxs_fw_show(hba);
6841         }
6842 
6843         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg, "%s (%s)", emlxs_label,
6844             emlxs_revision);
6845 
6846         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg,
6847             "%s Dev_id:%x Sub_id:%x Id:%d", hba->model_info.model,
6848             hba->model_info.device_id, hba->model_info.ssdid,
6849             hba->model_info.id);
6850 
6851 #ifdef EMLXS_I386
6852 
6853         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg,
6854             "Firmware:%s (%s) Boot:%s", vpd->fw_version, vpd->fw_label,
6855             vpd->boot_version);
6856 
6857 #else   /* EMLXS_SPARC */
6858 
6859         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg,
6860             "Firmware:%s (%s) Boot:%s Fcode:%s", vpd->fw_version,
6861             vpd->fw_label, vpd->boot_version, vpd->fcode_version);
6862 
6863 #endif  /* EMLXS_I386 */
6864 
6865         if (hba->sli_mode > 3) {
6866                 (void) snprintf(sli_mode, sizeof (sli_mode), "SLI:%d(%s)",
6867                     hba->sli_mode,
6868                     ((hba->flag & FC_FIP_SUPPORTED) ? "FIP" : "nonFIP"));
6869         } else {
6870                 (void) snprintf(sli_mode, sizeof (sli_mode), "SLI:%d",
6871                     hba->sli_mode);
6872         }
6873 
6874         (void) strlcpy(msi_mode, " INTX:1", sizeof (msi_mode));
6875 
6876 #ifdef MSI_SUPPORT
6877         if (hba->intr_flags & EMLXS_MSI_ENABLED) {
6878                 switch (hba->intr_type) {
6879                 case DDI_INTR_TYPE_FIXED:
6880                         (void) strlcpy(msi_mode, " MSI:0", sizeof (msi_mode));
6881                         break;
6882 
6883                 case DDI_INTR_TYPE_MSI:
6884                         (void) snprintf(msi_mode, sizeof (msi_mode), " MSI:%d",
6885                             hba->intr_count);
6886                         break;
6887 
6888                 case DDI_INTR_TYPE_MSIX:
6889                         (void) snprintf(msi_mode, sizeof (msi_mode), " MSIX:%d",
6890                             hba->intr_count);
6891                         break;
6892                 }
6893         }
6894 #endif /* MSI_SUPPORT */
6895 
6896         (void) strlcpy(npiv_mode, "", sizeof (npiv_mode));
6897 
6898         if (hba->flag & FC_NPIV_ENABLED) {
6899                 (void) snprintf(npiv_mode, sizeof (npiv_mode), " NPIV:%d",
6900                     hba->vpi_max+1);
6901         } else {
6902                 (void) strlcpy(npiv_mode, " NPIV:0", sizeof (npiv_mode));
6903         }
6904 
6905         if (hba->sli_mode == EMLXS_HBA_SLI4_MODE) {
6906                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg, "%s%s%s%s%s%s",
6907                     sli_mode, msi_mode, npiv_mode,
6908                     ((port->flag & EMLXS_INI_ENABLED)? " FCA":""),
6909                     ((port->flag & EMLXS_TGT_ENABLED)? " FCT":""),
6910                     ((SLI4_FCOE_MODE)? " FCoE":" FC"));
6911         } else {
6912                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg, "%s%s%s%s%s",
6913                     sli_mode, msi_mode, npiv_mode,
6914                     ((port->flag & EMLXS_INI_ENABLED)? " FCA":""),
6915                     ((port->flag & EMLXS_TGT_ENABLED)? " FCT":""));
6916         }
6917 
6918         wwpn = (uint8_t *)&hba->wwpn;
6919         wwnn = (uint8_t *)&hba->wwnn;
6920         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg,
6921             "WWPN:%02X%02X%02X%02X%02X%02X%02X%02X "
6922             "WWNN:%02X%02X%02X%02X%02X%02X%02X%02X",
6923             wwpn[0], wwpn[1], wwpn[2], wwpn[3], wwpn[4], wwpn[5], wwpn[6],
6924             wwpn[7], wwnn[0], wwnn[1], wwnn[2], wwnn[3], wwnn[4], wwnn[5],
6925             wwnn[6], wwnn[7]);
6926 
6927         for (i = 0; i < MAX_VPORTS; i++) {
6928                 port = &VPORT(i);
6929 
6930                 if (!(port->flag & EMLXS_PORT_CONFIG)) {
6931                         continue;
6932                 }
6933 
6934                 wwpn = (uint8_t *)&port->wwpn;
6935                 wwnn = (uint8_t *)&port->wwnn;
6936 
6937                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_msg,
6938                     "WWPN:%02X%02X%02X%02X%02X%02X%02X%02X "
6939                     "WWNN:%02X%02X%02X%02X%02X%02X%02X%02X",
6940                     wwpn[0], wwpn[1], wwpn[2], wwpn[3], wwpn[4], wwpn[5],
6941                     wwpn[6], wwpn[7], wwnn[0], wwnn[1], wwnn[2], wwnn[3],
6942                     wwnn[4], wwnn[5], wwnn[6], wwnn[7]);
6943         }
6944 
6945         /*
6946          * Announce the device: ddi_report_dev() prints a banner at boot time,
6947          * announcing the device pointed to by dip.
6948          */
6949         (void) ddi_report_dev(hba->dip);
6950 
6951         return;
6952 
6953 } /* emlxs_drv_banner() */
6954 
6955 
6956 extern void
6957 emlxs_get_fcode_version(emlxs_hba_t *hba)
6958 {
6959         emlxs_vpd_t     *vpd = &VPD;
6960         char            *prop_str;
6961         int             status;
6962 
6963         /* Setup fcode version property */
6964         prop_str = NULL;
6965         status =
6966             ddi_prop_lookup_string(DDI_DEV_T_ANY, (dev_info_t *)hba->dip, 0,
6967             "fcode-version", (char **)&prop_str);
6968 
6969         if (status == DDI_PROP_SUCCESS) {
6970                 bcopy(prop_str, vpd->fcode_version, strlen(prop_str));
6971                 (void) ddi_prop_free((void *)prop_str);
6972         } else {
6973                 (void) strncpy(vpd->fcode_version, "none",
6974                     (sizeof (vpd->fcode_version)-1));
6975         }
6976 
6977         return;
6978 
6979 } /* emlxs_get_fcode_version() */
6980 
6981 
6982 static int
6983 emlxs_hba_attach(dev_info_t *dip)
6984 {
6985         emlxs_hba_t     *hba;
6986         emlxs_port_t    *port;
6987         emlxs_config_t  *cfg;
6988         char            *prop_str;
6989         int             ddiinst;
6990         int32_t         emlxinst;
6991         int             status;
6992         uint32_t        rval;
6993         uint32_t        init_flag = 0;
6994         char            local_pm_components[32];
6995         uint32_t        i;
6996 
6997         ddiinst = ddi_get_instance(dip);
6998         emlxinst = emlxs_add_instance(ddiinst);
6999 
7000         if (emlxinst >= MAX_FC_BRDS) {
7001                 cmn_err(CE_WARN,
7002                     "?%s: fca_hba_attach failed. Too many driver ddiinsts. "
7003                     "inst=%x", DRIVER_NAME, ddiinst);
7004                 return (DDI_FAILURE);
7005         }
7006 
7007         if (emlxs_device.hba[emlxinst] == (emlxs_hba_t *)-1) {
7008                 return (DDI_FAILURE);
7009         }
7010 
7011         if (emlxs_device.hba[emlxinst]) {
7012                 return (DDI_SUCCESS);
7013         }
7014 
7015         /* An adapter can accidentally be plugged into a slave-only PCI slot */
7016         if (ddi_slaveonly(dip) == DDI_SUCCESS) {
7017                 cmn_err(CE_WARN,
7018                     "?%s%d: fca_hba_attach failed. Device in slave-only slot.",
7019                     DRIVER_NAME, ddiinst);
7020                 return (DDI_FAILURE);
7021         }
7022 
7023         /* Allocate emlxs_dev_ctl structure. */
7024         if (ddi_soft_state_zalloc(emlxs_soft_state, ddiinst) != DDI_SUCCESS) {
7025                 cmn_err(CE_WARN,
7026                     "?%s%d: fca_hba_attach failed. Unable to allocate soft "
7027                     "state.", DRIVER_NAME, ddiinst);
7028                 return (DDI_FAILURE);
7029         }
7030         init_flag |= ATTACH_SOFT_STATE;
7031 
7032         if ((hba = (emlxs_hba_t *)ddi_get_soft_state(emlxs_soft_state,
7033             ddiinst)) == NULL) {
7034                 cmn_err(CE_WARN,
7035                     "?%s%d: fca_hba_attach failed. Unable to get soft state.",
7036                     DRIVER_NAME, ddiinst);
7037                 goto failed;
7038         }
7039         bzero((char *)hba, sizeof (emlxs_hba_t));
7040 
7041         emlxs_device.hba[emlxinst] = hba;
7042         emlxs_device.log[emlxinst] = &hba->log;
7043 
7044 #ifdef DUMP_SUPPORT
7045         emlxs_device.dump_txtfile[emlxinst] = &hba->dump_txtfile;
7046         emlxs_device.dump_dmpfile[emlxinst] = &hba->dump_dmpfile;
7047         emlxs_device.dump_ceefile[emlxinst] = &hba->dump_ceefile;
7048 #endif /* DUMP_SUPPORT */
7049 
7050         hba->dip = dip;
7051         hba->emlxinst = emlxinst;
7052         hba->ddiinst = ddiinst;
7053 
7054         init_flag |= ATTACH_HBA;
7055 
7056         /* Enable the physical port on this HBA */
7057         port = &PPORT;
7058         port->hba = hba;
7059         port->vpi = 0;
7060         port->flag |= EMLXS_PORT_ENABLED;
7061 
7062         /* Allocate a transport structure */
7063         hba->fca_tran =
7064             (fc_fca_tran_t *)kmem_zalloc(sizeof (fc_fca_tran_t), KM_NOSLEEP);
7065         if (hba->fca_tran == NULL) {
7066                 cmn_err(CE_WARN,
7067                     "?%s%d: fca_hba_attach failed. Unable to allocate fca_tran "
7068                     "memory.", DRIVER_NAME, ddiinst);
7069                 goto failed;
7070         }
7071         bcopy((caddr_t)&emlxs_fca_tran, (caddr_t)hba->fca_tran,
7072             sizeof (fc_fca_tran_t));
7073 
7074         /*
7075          * Copy the global ddi_dma_attr to the local hba fields
7076          */
7077         bcopy((caddr_t)&emlxs_dma_attr, (caddr_t)&hba->dma_attr,
7078             sizeof (ddi_dma_attr_t));
7079         bcopy((caddr_t)&emlxs_dma_attr_ro, (caddr_t)&hba->dma_attr_ro,
7080             sizeof (ddi_dma_attr_t));
7081         bcopy((caddr_t)&emlxs_dma_attr_1sg, (caddr_t)&hba->dma_attr_1sg,
7082             sizeof (ddi_dma_attr_t));
7083         bcopy((caddr_t)&emlxs_dma_attr_fcip_rsp,
7084             (caddr_t)&hba->dma_attr_fcip_rsp, sizeof (ddi_dma_attr_t));
7085 
7086         /* Reset the fca_tran dma_attr fields to the per-hba copies */
7087         hba->fca_tran->fca_dma_attr = &hba->dma_attr;
7088         hba->fca_tran->fca_dma_fcp_cmd_attr = &hba->dma_attr_1sg;
7089         hba->fca_tran->fca_dma_fcp_rsp_attr = &hba->dma_attr_1sg;
7090         hba->fca_tran->fca_dma_fcp_data_attr = &hba->dma_attr_ro;
7091         hba->fca_tran->fca_dma_fcip_cmd_attr = &hba->dma_attr_1sg;
7092         hba->fca_tran->fca_dma_fcip_rsp_attr = &hba->dma_attr_fcip_rsp;
7093         hba->fca_tran->fca_dma_fcsm_cmd_attr = &hba->dma_attr_1sg;
7094         hba->fca_tran->fca_dma_fcsm_rsp_attr = &hba->dma_attr;
7095 
7096         /* Set the transport structure pointer in our dip */
7097         /* SFS may panic if we are in target only mode    */
7098         /* We will update the transport structure later   */
7099         (void) ddi_set_driver_private(dip, (caddr_t)&emlxs_fca_tran);
7100         init_flag |= ATTACH_FCA_TRAN;
7101 
7102         /* Perform driver integrity check */
7103         rval = emlxs_integrity_check(hba);
7104         if (rval) {
7105                 cmn_err(CE_WARN,
7106                     "?%s%d: fca_hba_attach failed. Driver integrity check "
7107                     "failed. %d error(s) found.", DRIVER_NAME, ddiinst, rval);
7108                 goto failed;
7109         }
7110 
7111         cfg = &CFG;
7112 
7113         bcopy((uint8_t *)&emlxs_cfg, (uint8_t *)cfg, sizeof (emlxs_cfg));
7114 #ifdef MSI_SUPPORT
7115         if ((void *)&ddi_intr_get_supported_types != NULL) {
7116                 hba->intr_flags |= EMLXS_MSI_ENABLED;
7117         }
7118 #endif  /* MSI_SUPPORT */
7119 
7120 
7121         /* Create the msg log file */
7122         if (emlxs_msg_log_create(hba) == 0) {
7123                 cmn_err(CE_WARN,
7124                     "?%s%d: fca_hba_attach failed. Unable to create message "
7125                     "log", DRIVER_NAME, ddiinst);
7126                 goto failed;
7127 
7128         }
7129         init_flag |= ATTACH_LOG;
7130 
7131         /* We can begin to use EMLXS_MSGF from this point on */
7132 
7133         /*
7134          * Find the I/O bus type If it is not a SBUS card,
7135          * then it is a PCI card. Default is PCI_FC (0).
7136          */
7137         prop_str = NULL;
7138         status = ddi_prop_lookup_string(DDI_DEV_T_ANY,
7139             (dev_info_t *)dip, 0, "name", (char **)&prop_str);
7140 
7141         if (status == DDI_PROP_SUCCESS) {
7142                 if (strncmp(prop_str, "lpfs", 4) == 0) {
7143                         hba->bus_type = SBUS_FC;
7144                 }
7145 
7146                 (void) ddi_prop_free((void *)prop_str);
7147         }
7148 
7149         /*
7150          * Copy DDS from the config method and update configuration parameters
7151          */
7152         (void) emlxs_get_props(hba);
7153 
7154 #ifdef FMA_SUPPORT
7155         hba->fm_caps = cfg[CFG_FM_CAPS].current;
7156 
7157         emlxs_fm_init(hba);
7158 
7159         init_flag |= ATTACH_FM;
7160 #endif  /* FMA_SUPPORT */
7161 
7162         if (emlxs_map_bus(hba)) {
7163                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg,
7164                     "Unable to map memory");
7165                 goto failed;
7166 
7167         }
7168         init_flag |= ATTACH_MAP_BUS;
7169 
7170         /* Attempt to identify the adapter */
7171         rval = emlxs_init_adapter_info(hba);
7172 
7173         if (rval == 0) {
7174                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg,
7175                     "Unable to get adapter info. Id:%d  Device id:0x%x "
7176                     "Model:%s", hba->model_info.id,
7177                     hba->model_info.device_id, hba->model_info.model);
7178                 goto failed;
7179         }
7180 #define FILTER_ORACLE_BRANDED
7181 #ifdef FILTER_ORACLE_BRANDED
7182 
7183         /* Oracle branded adapters are not supported in this driver */
7184         if (hba->model_info.flags & EMLXS_ORACLE_BRANDED) {
7185                 hba->model_info.flags |= EMLXS_NOT_SUPPORTED;
7186         }
7187 #endif /* FILTER_ORACLE_BRANDED */
7188 
7189         /* Check if adapter is not supported */
7190         if (hba->model_info.flags & EMLXS_NOT_SUPPORTED) {
7191                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg,
7192                     "Unsupported adapter found. Id:%d  Device id:0x%x "
7193                     "SSDID:0x%x  Model:%s", hba->model_info.id,
7194                     hba->model_info.device_id,
7195                     hba->model_info.ssdid, hba->model_info.model);
7196                 goto failed;
7197         }
7198 
7199         if (hba->model_info.sli_mask & EMLXS_SLI4_MASK) {
7200                 hba->sli.sli4.mem_sgl_size = MEM_SGL_SIZE;
7201 
7202 #ifdef EMLXS_I386
7203                 /*
7204                  * TigerShark has 64K limit for SG element size
7205                  * Do this for x86 alone. For SPARC, the driver
7206                  * breaks up the single SGE later on.
7207                  */
7208                 hba->dma_attr_ro.dma_attr_count_max = 0xffff;
7209 
7210                 i = cfg[CFG_MAX_XFER_SIZE].current;
7211                 /* Update SGL size based on max_xfer_size */
7212                 if (i > 516096) {
7213                         /* 516096 = (((2048 / 16) - 2) * 4096) */
7214                         hba->sli.sli4.mem_sgl_size = 4096;
7215                 } else if (i > 253952) {
7216                         /* 253952 = (((1024 / 16) - 2) * 4096) */
7217                         hba->sli.sli4.mem_sgl_size = 2048;
7218                 } else {
7219                         hba->sli.sli4.mem_sgl_size = 1024;
7220                 }
7221 #endif /* EMLXS_I386 */
7222 
7223                 i = SGL_TO_SGLLEN(hba->sli.sli4.mem_sgl_size);
7224         } else {
7225                 hba->sli.sli3.mem_bpl_size = MEM_BPL_SIZE;
7226 
7227 #ifdef EMLXS_I386
7228                 i = cfg[CFG_MAX_XFER_SIZE].current;
7229                 /* Update BPL size based on max_xfer_size */
7230                 if (i > 688128) {
7231                         /* 688128 = (((2048 / 12) - 2) * 4096) */
7232                         hba->sli.sli3.mem_bpl_size = 4096;
7233                 } else if (i > 339968) {
7234                         /* 339968 = (((1024 / 12) - 2) * 4096) */
7235                         hba->sli.sli3.mem_bpl_size = 2048;
7236                 } else {
7237                         hba->sli.sli3.mem_bpl_size = 1024;
7238                 }
7239 #endif /* EMLXS_I386 */
7240 
7241                 i = BPL_TO_SGLLEN(hba->sli.sli3.mem_bpl_size);
7242         }
7243 
7244         /* Update dma_attr_sgllen based on true SGL length */
7245         hba->dma_attr.dma_attr_sgllen = i;
7246         hba->dma_attr_ro.dma_attr_sgllen = i;
7247         hba->dma_attr_fcip_rsp.dma_attr_sgllen = i;
7248 
7249         if (EMLXS_SLI_MAP_HDW(hba)) {
7250                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg,
7251                     "Unable to map memory");
7252                 goto failed;
7253 
7254         }
7255         init_flag |= ATTACH_MAP_SLI;
7256 
7257         /* Initialize the interrupts. But don't add them yet */
7258         status = EMLXS_INTR_INIT(hba, 0);
7259         if (status != DDI_SUCCESS) {
7260                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg,
7261                     "Unable to initalize interrupt(s).");
7262                 goto failed;
7263 
7264         }
7265         init_flag |= ATTACH_INTR_INIT;
7266 
7267         /* Initialize LOCKs */
7268         emlxs_msg_lock_reinit(hba);
7269         emlxs_lock_init(hba);
7270         init_flag |= ATTACH_LOCK;
7271 
7272         /* Create the event queue */
7273         if (emlxs_event_queue_create(hba) == 0) {
7274                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg,
7275                     "Unable to create event queue");
7276 
7277                 goto failed;
7278 
7279         }
7280         init_flag |= ATTACH_EVENTS;
7281 
7282         /* Initialize the power management */
7283         mutex_enter(&EMLXS_PM_LOCK);
7284         hba->pm_state = EMLXS_PM_IN_ATTACH;
7285         hba->pm_level = EMLXS_PM_ADAPTER_DOWN;
7286         hba->pm_busy = 0;
7287 #ifdef IDLE_TIMER
7288         hba->pm_active = 1;
7289         hba->pm_idle_timer = 0;
7290 #endif  /* IDLE_TIMER */
7291         mutex_exit(&EMLXS_PM_LOCK);
7292 
7293         /* Set the pm component name */
7294         (void) snprintf(local_pm_components, sizeof (local_pm_components),
7295             "NAME=%s%d", DRIVER_NAME, ddiinst);
7296         emlxs_pm_components[0] = local_pm_components;
7297 
7298         /* Check if power management support is enabled */
7299         if (cfg[CFG_PM_SUPPORT].current) {
7300                 if (ddi_prop_update_string_array(DDI_DEV_T_NONE, dip,
7301                     "pm-components", emlxs_pm_components,
7302                     sizeof (emlxs_pm_components) /
7303                     sizeof (emlxs_pm_components[0])) !=
7304                     DDI_PROP_SUCCESS) {
7305                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg,
7306                             "Unable to create pm components.");
7307                         goto failed;
7308                 }
7309         }
7310 
7311         /* Needed for suspend and resume support */
7312         (void) ddi_prop_update_string(DDI_DEV_T_NONE, dip, "pm-hardware-state",
7313             "needs-suspend-resume");
7314         init_flag |= ATTACH_PROP;
7315 
7316         emlxs_thread_spawn_create(hba);
7317         init_flag |= ATTACH_SPAWN;
7318 
7319         emlxs_thread_create(hba, &hba->iodone_thread);
7320 
7321         init_flag |= ATTACH_THREAD;
7322 
7323 retry:
7324         /* Setup initiator / target ports */
7325         emlxs_mode_init(hba);
7326 
7327         /* If driver did not attach to either stack, */
7328         /* then driver attach fails */
7329         if (port->mode == MODE_NONE) {
7330                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg,
7331                     "Driver interfaces not enabled.");
7332                 goto failed;
7333         }
7334 
7335         /*
7336          * Initialize HBA
7337          */
7338 
7339         /* Set initial state */
7340         mutex_enter(&EMLXS_PORT_LOCK);
7341         hba->flag |= FC_OFFLINE_MODE;
7342         hba->flag &= ~(FC_ONLINE_MODE | FC_ONLINING_MODE | FC_OFFLINING_MODE);
7343         mutex_exit(&EMLXS_PORT_LOCK);
7344 
7345         if (status = emlxs_online(hba)) {
7346                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg,
7347                     "Unable to initialize adapter.");
7348 
7349                 if (status == EAGAIN) {
7350                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg,
7351                             "Retrying adapter initialization ...");
7352                         goto retry;
7353                 }
7354                 goto failed;
7355         }
7356         init_flag |= ATTACH_ONLINE;
7357 
7358         /* This is to ensure that the model property is properly set */
7359         (void) ddi_prop_update_string(DDI_DEV_T_NONE, dip, "model",
7360             hba->model_info.model);
7361 
7362         /* Create the device node. */
7363         if (ddi_create_minor_node(dip, "devctl", S_IFCHR, ddiinst, NULL, 0) ==
7364             DDI_FAILURE) {
7365                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_failed_msg,
7366                     "Unable to create device node.");
7367                 goto failed;
7368         }
7369         init_flag |= ATTACH_NODE;
7370 
7371         /* Attach initiator now */
7372         /* This must come after emlxs_online() */
7373         emlxs_fca_attach(hba);
7374         init_flag |= ATTACH_FCA;
7375 
7376         /* Initialize kstat information */
7377         hba->kstat = kstat_create(DRIVER_NAME,
7378             ddiinst, "statistics", "controller",
7379             KSTAT_TYPE_RAW, sizeof (emlxs_stats_t),
7380             KSTAT_FLAG_VIRTUAL);
7381 
7382         if (hba->kstat == NULL) {
7383                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
7384                     "kstat_create failed.");
7385         } else {
7386                 hba->kstat->ks_data = (void *)&hba->stats;
7387                 kstat_install(hba->kstat);
7388                 init_flag |= ATTACH_KSTAT;
7389         }
7390 
7391 #if (EMLXS_MODREV >= EMLXS_MODREV3) && (EMLXS_MODREV <= EMLXS_MODREV4)
7392         /* Setup virtual port properties */
7393         emlxs_read_vport_prop(hba);
7394 #endif  /* EMLXS_MODREV3 || EMLXS_MODREV4 */
7395 
7396 
7397 #ifdef DHCHAP_SUPPORT
7398         emlxs_dhc_attach(hba);
7399         init_flag |= ATTACH_DHCHAP;
7400 #endif  /* DHCHAP_SUPPORT */
7401 
7402         /* Display the driver banner now */
7403         emlxs_drv_banner(hba);
7404 
7405         /* Raise the power level */
7406 
7407         /*
7408          * This will not execute emlxs_hba_resume because
7409          * EMLXS_PM_IN_ATTACH is set
7410          */
7411         if (emlxs_pm_raise_power(dip) != DDI_SUCCESS) {
7412                 /* Set power up anyway. This should not happen! */
7413                 mutex_enter(&EMLXS_PM_LOCK);
7414                 hba->pm_level = EMLXS_PM_ADAPTER_UP;
7415                 hba->pm_state &= ~EMLXS_PM_IN_ATTACH;
7416                 mutex_exit(&EMLXS_PM_LOCK);
7417         } else {
7418                 mutex_enter(&EMLXS_PM_LOCK);
7419                 hba->pm_state &= ~EMLXS_PM_IN_ATTACH;
7420                 mutex_exit(&EMLXS_PM_LOCK);
7421         }
7422 
7423 #ifdef SFCT_SUPPORT
7424         if (port->flag & EMLXS_TGT_ENABLED) {
7425                 /* Do this last */
7426                 emlxs_fct_attach(hba);
7427                 init_flag |= ATTACH_FCT;
7428         }
7429 #endif /* SFCT_SUPPORT */
7430 
7431         return (DDI_SUCCESS);
7432 
7433 failed:
7434 
7435         emlxs_driver_remove(dip, init_flag, 1);
7436 
7437         return (DDI_FAILURE);
7438 
7439 } /* emlxs_hba_attach() */
7440 
7441 
7442 static int
7443 emlxs_hba_detach(dev_info_t *dip)
7444 {
7445         emlxs_hba_t     *hba;
7446         emlxs_port_t    *port;
7447         int             ddiinst;
7448         int             count;
7449         uint32_t        init_flag = (uint32_t)-1;
7450 
7451         ddiinst = ddi_get_instance(dip);
7452         hba = ddi_get_soft_state(emlxs_soft_state, ddiinst);
7453         port = &PPORT;
7454 
7455         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_debug_msg, NULL);
7456 
7457         mutex_enter(&EMLXS_PM_LOCK);
7458         hba->pm_state |= EMLXS_PM_IN_DETACH;
7459         mutex_exit(&EMLXS_PM_LOCK);
7460 
7461         /* Lower the power level */
7462         /*
7463          * This will not suspend the driver since the
7464          * EMLXS_PM_IN_DETACH has been set
7465          */
7466         if (emlxs_pm_lower_power(dip) != DDI_SUCCESS) {
7467                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_failed_msg,
7468                     "Unable to lower power.");
7469 
7470                 mutex_enter(&EMLXS_PM_LOCK);
7471                 hba->pm_state &= ~EMLXS_PM_IN_DETACH;
7472                 mutex_exit(&EMLXS_PM_LOCK);
7473 
7474                 return (DDI_FAILURE);
7475         }
7476 
7477         /* Take the adapter offline first, if not already */
7478         if (emlxs_offline(hba, 1) != 0) {
7479                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_detach_failed_msg,
7480                     "Unable to take adapter offline.");
7481 
7482                 mutex_enter(&EMLXS_PM_LOCK);
7483                 hba->pm_state &= ~EMLXS_PM_IN_DETACH;
7484                 mutex_exit(&EMLXS_PM_LOCK);
7485 
7486                 (void) emlxs_pm_raise_power(dip);
7487 
7488                 return (DDI_FAILURE);
7489         }
7490         /* Check ub buffer pools */
7491         if (port->ub_pool) {
7492                 mutex_enter(&EMLXS_UB_LOCK);
7493 
7494                 /* Wait up to 10 seconds for all ub pools to be freed */
7495                 count = 10 * 2;
7496                 while (port->ub_pool && count) {
7497                         mutex_exit(&EMLXS_UB_LOCK);
7498                         delay(drv_usectohz(500000));    /* half second wait */
7499                         count--;
7500                         mutex_enter(&EMLXS_UB_LOCK);
7501                 }
7502 
7503                 if (port->ub_pool) {
7504                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
7505                             "fca_unbind_port: Unsolicited buffers still "
7506                             "active. port=%p. Destroying...", port);
7507 
7508                         /* Destroy all pools */
7509                         while (port->ub_pool) {
7510                                 emlxs_ub_destroy(port, port->ub_pool);
7511                         }
7512                 }
7513 
7514                 mutex_exit(&EMLXS_UB_LOCK);
7515         }
7516         init_flag &= ~ATTACH_ONLINE;
7517 
7518         /* Remove the driver instance */
7519         emlxs_driver_remove(dip, init_flag, 0);
7520 
7521         return (DDI_SUCCESS);
7522 
7523 } /* emlxs_hba_detach() */
7524 
7525 
7526 extern int
7527 emlxs_map_bus(emlxs_hba_t *hba)
7528 {
7529         emlxs_port_t            *port = &PPORT;
7530         dev_info_t              *dip;
7531         ddi_device_acc_attr_t   dev_attr;
7532         int                     status;
7533 
7534         dip = (dev_info_t *)hba->dip;
7535         dev_attr = emlxs_dev_acc_attr;
7536 
7537         if (hba->bus_type == SBUS_FC) {
7538                 if (hba->pci_acc_handle == 0) {
7539                         status = ddi_regs_map_setup(dip,
7540                             SBUS_DFLY_PCI_CFG_RINDEX,
7541                             (caddr_t *)&hba->pci_addr,
7542                             0, 0, &emlxs_dev_acc_attr, &hba->pci_acc_handle);
7543                         if (status != DDI_SUCCESS) {
7544                                 EMLXS_MSGF(EMLXS_CONTEXT,
7545                                     &emlxs_attach_failed_msg,
7546                                     "(SBUS) ddi_regs_map_setup PCI failed. "
7547                                     "status=%x", status);
7548                                 goto failed;
7549                         }
7550                 }
7551 
7552                 if (hba->sbus_pci_handle == 0) {
7553                         status = ddi_regs_map_setup(dip,
7554                             SBUS_TITAN_PCI_CFG_RINDEX,
7555                             (caddr_t *)&hba->sbus_pci_addr,
7556                             0, 0, &dev_attr, &hba->sbus_pci_handle);
7557                         if (status != DDI_SUCCESS) {
7558                                 EMLXS_MSGF(EMLXS_CONTEXT,
7559                                     &emlxs_attach_failed_msg,
7560                                     "(SBUS) ddi_regs_map_setup TITAN PCI "
7561                                     "failed. status=%x", status);
7562                                 goto failed;
7563                         }
7564                 }
7565 
7566         } else {        /* ****** PCI ****** */
7567 
7568                 if (hba->pci_acc_handle == 0) {
7569                         status = ddi_regs_map_setup(dip,
7570                             PCI_CFG_RINDEX,
7571                             (caddr_t *)&hba->pci_addr,
7572                             0, 0, &emlxs_dev_acc_attr, &hba->pci_acc_handle);
7573                         if (status != DDI_SUCCESS) {
7574                                 EMLXS_MSGF(EMLXS_CONTEXT,
7575                                     &emlxs_attach_failed_msg,
7576                                     "(PCI) ddi_regs_map_setup PCI failed. "
7577                                     "status=%x", status);
7578                                 goto failed;
7579                         }
7580                 }
7581 #ifdef EMLXS_I386
7582                 /* Setting up PCI configure space */
7583                 (void) ddi_put16(hba->pci_acc_handle,
7584                     (uint16_t *)(hba->pci_addr + PCI_COMMAND_REGISTER),
7585                     CMD_CFG_VALUE | CMD_IO_ENBL);
7586 
7587 #ifdef FMA_SUPPORT
7588                 if (emlxs_fm_check_acc_handle(hba, hba->pci_acc_handle)
7589                     != DDI_FM_OK) {
7590                         EMLXS_MSGF(EMLXS_CONTEXT,
7591                             &emlxs_invalid_access_handle_msg, NULL);
7592                         goto failed;
7593                 }
7594 #endif  /* FMA_SUPPORT */
7595 
7596 #endif  /* EMLXS_I386 */
7597 
7598         }
7599         return (0);
7600 
7601 failed:
7602 
7603         emlxs_unmap_bus(hba);
7604         return (ENOMEM);
7605 
7606 } /* emlxs_map_bus() */
7607 
7608 
7609 extern void
7610 emlxs_unmap_bus(emlxs_hba_t *hba)
7611 {
7612         if (hba->pci_acc_handle) {
7613                 (void) ddi_regs_map_free(&hba->pci_acc_handle);
7614                 hba->pci_acc_handle = 0;
7615         }
7616 
7617         if (hba->sbus_pci_handle) {
7618                 (void) ddi_regs_map_free(&hba->sbus_pci_handle);
7619                 hba->sbus_pci_handle = 0;
7620         }
7621 
7622         return;
7623 
7624 } /* emlxs_unmap_bus() */
7625 
7626 
7627 static int
7628 emlxs_get_props(emlxs_hba_t *hba)
7629 {
7630         emlxs_config_t  *cfg;
7631         uint32_t        i;
7632         char            string[256];
7633         uint32_t        new_value;
7634 
7635         /* Initialize each parameter */
7636         for (i = 0; i < NUM_CFG_PARAM; i++) {
7637                 cfg = &hba->config[i];
7638 
7639                 /* Ensure strings are terminated */
7640                 cfg->string[(EMLXS_CFG_STR_SIZE-1)] = 0;
7641                 cfg->help[(EMLXS_CFG_HELP_SIZE-1)]  = 0;
7642 
7643                 /* Set the current value to the default value */
7644                 new_value = cfg->def;
7645 
7646                 /* First check for the global setting */
7647                 new_value = (uint32_t)ddi_prop_get_int(DDI_DEV_T_ANY,
7648                     (void *)hba->dip, DDI_PROP_DONTPASS,
7649                     cfg->string, new_value);
7650 
7651                 /* Now check for the per adapter ddiinst setting */
7652                 (void) snprintf(string, sizeof (string), "%s%d-%s", DRIVER_NAME,
7653                     hba->ddiinst, cfg->string);
7654 
7655                 new_value = (uint32_t)ddi_prop_get_int(DDI_DEV_T_ANY,
7656                     (void *)hba->dip, DDI_PROP_DONTPASS, string, new_value);
7657 
7658                 /* Now check the parameter */
7659                 cfg->current = emlxs_check_parm(hba, i, new_value);
7660         }
7661 
7662         return (0);
7663 
7664 } /* emlxs_get_props() */
7665 
7666 
7667 extern uint32_t
7668 emlxs_check_parm(emlxs_hba_t *hba, uint32_t index, uint32_t new_value)
7669 {
7670         emlxs_port_t    *port = &PPORT;
7671         uint32_t        i;
7672         emlxs_config_t  *cfg;
7673         emlxs_vpd_t     *vpd = &VPD;
7674 
7675         if (index >= NUM_CFG_PARAM) {
7676                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
7677                     "check_parm failed. Invalid index = %d", index);
7678 
7679                 return (new_value);
7680         }
7681 
7682         cfg = &hba->config[index];
7683 
7684         if (new_value > cfg->hi) {
7685                 new_value = cfg->def;
7686         } else if (new_value < cfg->low) {
7687                 new_value = cfg->def;
7688         }
7689 
7690         /* Perform additional checks */
7691         switch (index) {
7692 #ifdef SFCT_SUPPORT
7693         case CFG_NPIV_ENABLE:
7694                 if (hba->config[CFG_TARGET_MODE].current &&
7695                     hba->config[CFG_DTM_ENABLE].current == 0) {
7696                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_init_msg,
7697                             "enable-npiv: Not supported in pure target mode. "
7698                             "Disabling.");
7699 
7700                         new_value = 0;
7701                 }
7702                 break;
7703 #endif /* SFCT_SUPPORT */
7704 
7705 
7706         case CFG_NUM_NODES:
7707                 switch (new_value) {
7708                 case 1:
7709                 case 2:
7710                         /* Must have at least 3 if not 0 */
7711                         return (3);
7712 
7713                 default:
7714                         break;
7715                 }
7716                 break;
7717 
7718         case CFG_FW_CHECK:
7719                 /* The 0x2 bit implies the 0x1 bit will also be set */
7720                 if (new_value & 0x2) {
7721                         new_value |= 0x1;
7722                 }
7723 
7724                 /* The 0x4 bit should not be set if 0x1 or 0x2 is not set */
7725                 if (!(new_value & 0x3) && (new_value & 0x4)) {
7726                         new_value &= ~0x4;
7727                 }
7728                 break;
7729 
7730         case CFG_LINK_SPEED:
7731                 if ((new_value > 8) &&
7732                     (hba->config[CFG_TOPOLOGY].current == 4)) {
7733                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_init_msg,
7734                             "link-speed: %dGb not supported in loop topology. "
7735                             "Switching to auto detect.",
7736                             new_value);
7737 
7738                         new_value = 0;
7739                         break;
7740                 }
7741 
7742                 if (vpd->link_speed) {
7743                         switch (new_value) {
7744                         case 0:
7745                                 break;
7746 
7747                         case 1:
7748                                 if (!(vpd->link_speed & LMT_1GB_CAPABLE)) {
7749                                         new_value = 0;
7750 
7751                                         EMLXS_MSGF(EMLXS_CONTEXT,
7752                                             &emlxs_init_msg,
7753                                             "link-speed: 1Gb not supported "
7754                                             "by adapter. Switching to auto "
7755                                             "detect.");
7756                                 }
7757                                 break;
7758 
7759                         case 2:
7760                                 if (!(vpd->link_speed & LMT_2GB_CAPABLE)) {
7761                                         new_value = 0;
7762 
7763                                         EMLXS_MSGF(EMLXS_CONTEXT,
7764                                             &emlxs_init_msg,
7765                                             "link-speed: 2Gb not supported "
7766                                             "by adapter. Switching to auto "
7767                                             "detect.");
7768                                 }
7769                                 break;
7770 
7771                         case 4:
7772                                 if (!(vpd->link_speed & LMT_4GB_CAPABLE)) {
7773                                         new_value = 0;
7774 
7775                                         EMLXS_MSGF(EMLXS_CONTEXT,
7776                                             &emlxs_init_msg,
7777                                             "link-speed: 4Gb not supported "
7778                                             "by adapter. Switching to auto "
7779                                             "detect.");
7780                                 }
7781                                 break;
7782 
7783                         case 8:
7784                                 if (!(vpd->link_speed & LMT_8GB_CAPABLE)) {
7785                                         new_value = 0;
7786 
7787                                         EMLXS_MSGF(EMLXS_CONTEXT,
7788                                             &emlxs_init_msg,
7789                                             "link-speed: 8Gb not supported "
7790                                             "by adapter. Switching to auto "
7791                                             "detect.");
7792                                 }
7793                                 break;
7794 
7795                         case 16:
7796                                 if (!(vpd->link_speed & LMT_16GB_CAPABLE)) {
7797                                         new_value = 0;
7798 
7799                                         EMLXS_MSGF(EMLXS_CONTEXT,
7800                                             &emlxs_init_msg,
7801                                             "link-speed: 16Gb not supported "
7802                                             "by adapter. Switching to auto "
7803                                             "detect.");
7804                                 }
7805                                 break;
7806 
7807                         default:
7808                                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_init_msg,
7809                                     "link-speed: Invalid value=%d provided. "
7810                                     "Switching to auto detect.",
7811                                     new_value);
7812 
7813                                 new_value = 0;
7814                         }
7815                 } else {        /* Perform basic validity check */
7816 
7817                         /* Perform additional check on link speed */
7818                         switch (new_value) {
7819                         case 0:
7820                         case 1:
7821                         case 2:
7822                         case 4:
7823                         case 8:
7824                         case 16:
7825                                 /* link-speed is a valid choice */
7826                                 break;
7827 
7828                         default:
7829                                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_init_msg,
7830                                     "link-speed: Invalid value=%d provided. "
7831                                     "Switching to auto detect.",
7832                                     new_value);
7833 
7834                                 new_value = 0;
7835                         }
7836                 }
7837                 break;
7838 
7839         case CFG_TOPOLOGY:
7840                 if ((new_value == 4) &&
7841                     (hba->config[CFG_LINK_SPEED].current > 8)) {
7842                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_init_msg,
7843                             "topology: Loop topology not supported "
7844                             "with link speeds greater than 8Gb. "
7845                             "Switching to auto detect.");
7846 
7847                         new_value = 0;
7848                         break;
7849                 }
7850 
7851                 /* Perform additional check on topology */
7852                 switch (new_value) {
7853                 case 0:
7854                 case 2:
7855                 case 4:
7856                 case 6:
7857                         /* topology is a valid choice */
7858                         break;
7859 
7860                 default:
7861                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_init_msg,
7862                             "topology: Invalid value=%d provided. "
7863                             "Switching to auto detect.",
7864                             new_value);
7865 
7866                         new_value = 0;
7867                         break;
7868                 }
7869                 break;
7870 
7871 #ifdef DHCHAP_SUPPORT
7872         case CFG_AUTH_TYPE:
7873         {
7874                 uint32_t shift;
7875                 uint32_t mask;
7876 
7877                 /* Perform additional check on auth type */
7878                 shift = 12;
7879                 mask  = 0xF000;
7880                 for (i = 0; i < 4; i++) {
7881                         if (((new_value & mask) >> shift) > DFC_AUTH_TYPE_MAX) {
7882                                 return (cfg->def);
7883                         }
7884 
7885                         shift -= 4;
7886                         mask >>= 4;
7887                 }
7888                 break;
7889         }
7890 
7891         case CFG_AUTH_HASH:
7892         {
7893                 uint32_t shift;
7894                 uint32_t mask;
7895 
7896                 /* Perform additional check on auth hash */
7897                 shift = 12;
7898                 mask  = 0xF000;
7899                 for (i = 0; i < 4; i++) {
7900                         if (((new_value & mask) >> shift) > DFC_AUTH_HASH_MAX) {
7901                                 return (cfg->def);
7902                         }
7903 
7904                         shift -= 4;
7905                         mask >>= 4;
7906                 }
7907                 break;
7908         }
7909 
7910         case CFG_AUTH_GROUP:
7911         {
7912                 uint32_t shift;
7913                 uint32_t mask;
7914 
7915                 /* Perform additional check on auth group */
7916                 shift = 28;
7917                 mask  = 0xF0000000;
7918                 for (i = 0; i < 8; i++) {
7919                         if (((new_value & mask) >> shift) >
7920                             DFC_AUTH_GROUP_MAX) {
7921                                 return (cfg->def);
7922                         }
7923 
7924                         shift -= 4;
7925                         mask >>= 4;
7926                 }
7927                 break;
7928         }
7929 
7930         case CFG_AUTH_INTERVAL:
7931                 if (new_value < 10) {
7932                         return (10);
7933                 }
7934                 break;
7935 
7936 
7937 #endif /* DHCHAP_SUPPORT */
7938 
7939         } /* switch */
7940 
7941         return (new_value);
7942 
7943 } /* emlxs_check_parm() */
7944 
7945 
7946 extern uint32_t
7947 emlxs_set_parm(emlxs_hba_t *hba, uint32_t index, uint32_t new_value)
7948 {
7949         emlxs_port_t    *port = &PPORT;
7950         emlxs_port_t    *vport;
7951         uint32_t        vpi;
7952         emlxs_config_t  *cfg;
7953         uint32_t        old_value;
7954 
7955         if (index >= NUM_CFG_PARAM) {
7956                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
7957                     "set_parm failed. Invalid index = %d", index);
7958 
7959                 return ((uint32_t)FC_FAILURE);
7960         }
7961 
7962         cfg = &hba->config[index];
7963 
7964         if (!(cfg->flags & PARM_DYNAMIC)) {
7965                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
7966                     "set_parm failed. %s is not dynamic.", cfg->string);
7967 
7968                 return ((uint32_t)FC_FAILURE);
7969         }
7970 
7971         /* Check new value */
7972         old_value = new_value;
7973         new_value = emlxs_check_parm(hba, index, new_value);
7974 
7975         if (old_value != new_value) {
7976                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
7977                     "set_parm: %s invalid. 0x%x --> 0x%x",
7978                     cfg->string, old_value, new_value);
7979         }
7980 
7981         /* Return now if no actual change */
7982         if (new_value == cfg->current) {
7983                 return (FC_SUCCESS);
7984         }
7985 
7986         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
7987             "set_parm: %s changing. 0x%x --> 0x%x",
7988             cfg->string, cfg->current, new_value);
7989 
7990         old_value = cfg->current;
7991         cfg->current = new_value;
7992 
7993         /* React to change if needed */
7994         switch (index) {
7995 
7996         case CFG_PCI_MAX_READ:
7997                 /* Update MXR */
7998                 emlxs_pcix_mxr_update(hba, 1);
7999                 break;
8000 
8001 #ifdef SFCT_SUPPORT
8002         case CFG_TARGET_MODE:
8003                 (void) emlxs_reset(port, FC_FCA_LINK_RESET);
8004                 break;
8005 #endif /* SFCT_SUPPORT */
8006 
8007         case CFG_SLI_MODE:
8008                 /* Check SLI mode */
8009                 if ((hba->sli_mode == 3) && (new_value == 2)) {
8010                         /* All vports must be disabled first */
8011                         for (vpi = 1; vpi < MAX_VPORTS; vpi++) {
8012                                 vport = &VPORT(vpi);
8013 
8014                                 if (vport->flag & EMLXS_PORT_ENABLED) {
8015                                         /* Reset current value */
8016                                         cfg->current = old_value;
8017 
8018                                         EMLXS_MSGF(EMLXS_CONTEXT,
8019                                             &emlxs_sfs_debug_msg,
8020                                             "set_parm failed. %s: vpi=%d "
8021                                             "still enabled. Value restored to "
8022                                             "0x%x.", cfg->string, vpi,
8023                                             old_value);
8024 
8025                                         return (2);
8026                                 }
8027                         }
8028                 }
8029 
8030                 if ((hba->sli_mode >= 4) && (new_value < 4)) {
8031                         /*
8032                          * Not allow to set to SLI 2 or 3 if HBA supports SLI4
8033                          */
8034                         cfg->current = old_value;
8035                         return ((uint32_t)FC_FAILURE);
8036                 }
8037 
8038                 break;
8039 
8040         case CFG_NPIV_ENABLE:
8041                 /* Check if NPIV is being disabled */
8042                 if ((old_value == 1) && (new_value == 0)) {
8043                         /* All vports must be disabled first */
8044                         for (vpi = 1; vpi < MAX_VPORTS; vpi++) {
8045                                 vport = &VPORT(vpi);
8046 
8047                                 if (vport->flag & EMLXS_PORT_ENABLED) {
8048                                         /* Reset current value */
8049                                         cfg->current = old_value;
8050 
8051                                         EMLXS_MSGF(EMLXS_CONTEXT,
8052                                             &emlxs_sfs_debug_msg,
8053                                             "set_parm failed. %s: vpi=%d "
8054                                             "still enabled. Value restored to "
8055                                             "0x%x.", cfg->string, vpi,
8056                                             old_value);
8057 
8058                                         return (2);
8059                                 }
8060                         }
8061                 }
8062 
8063                 /* Trigger adapter reset */
8064                 /* (void) emlxs_reset(port, FC_FCA_RESET); */
8065 
8066                 break;
8067 
8068 
8069         case CFG_VPORT_RESTRICTED:
8070                 for (vpi = 0; vpi < MAX_VPORTS; vpi++) {
8071                         vport = &VPORT(vpi);
8072 
8073                         if (!(vport->flag & EMLXS_PORT_CONFIG)) {
8074                                 continue;
8075                         }
8076 
8077                         if (vport->options & EMLXS_OPT_RESTRICT_MASK) {
8078                                 continue;
8079                         }
8080 
8081                         if (new_value) {
8082                                 vport->flag |= EMLXS_PORT_RESTRICTED;
8083                         } else {
8084                                 vport->flag &= ~EMLXS_PORT_RESTRICTED;
8085                         }
8086                 }
8087 
8088                 break;
8089 
8090 #ifdef DHCHAP_SUPPORT
8091         case CFG_AUTH_ENABLE:
8092                 (void) emlxs_reset(port, FC_FCA_LINK_RESET);
8093                 break;
8094 
8095         case CFG_AUTH_TMO:
8096                 hba->auth_cfg.authentication_timeout = cfg->current;
8097                 break;
8098 
8099         case CFG_AUTH_MODE:
8100                 hba->auth_cfg.authentication_mode = cfg->current;
8101                 break;
8102 
8103         case CFG_AUTH_BIDIR:
8104                 hba->auth_cfg.bidirectional = cfg->current;
8105                 break;
8106 
8107         case CFG_AUTH_TYPE:
8108                 hba->auth_cfg.authentication_type_priority[0] =
8109                     (cfg->current & 0xF000) >> 12;
8110                 hba->auth_cfg.authentication_type_priority[1] =
8111                     (cfg->current & 0x0F00) >> 8;
8112                 hba->auth_cfg.authentication_type_priority[2] =
8113                     (cfg->current & 0x00F0) >> 4;
8114                 hba->auth_cfg.authentication_type_priority[3] =
8115                     (cfg->current & 0x000F);
8116                 break;
8117 
8118         case CFG_AUTH_HASH:
8119                 hba->auth_cfg.hash_priority[0] =
8120                     (cfg->current & 0xF000) >> 12;
8121                 hba->auth_cfg.hash_priority[1] = (cfg->current & 0x0F00)>>8;
8122                 hba->auth_cfg.hash_priority[2] = (cfg->current & 0x00F0)>>4;
8123                 hba->auth_cfg.hash_priority[3] = (cfg->current & 0x000F);
8124                 break;
8125 
8126         case CFG_AUTH_GROUP:
8127                 hba->auth_cfg.dh_group_priority[0] =
8128                     (cfg->current & 0xF0000000) >> 28;
8129                 hba->auth_cfg.dh_group_priority[1] =
8130                     (cfg->current & 0x0F000000) >> 24;
8131                 hba->auth_cfg.dh_group_priority[2] =
8132                     (cfg->current & 0x00F00000) >> 20;
8133                 hba->auth_cfg.dh_group_priority[3] =
8134                     (cfg->current & 0x000F0000) >> 16;
8135                 hba->auth_cfg.dh_group_priority[4] =
8136                     (cfg->current & 0x0000F000) >> 12;
8137                 hba->auth_cfg.dh_group_priority[5] =
8138                     (cfg->current & 0x00000F00) >> 8;
8139                 hba->auth_cfg.dh_group_priority[6] =
8140                     (cfg->current & 0x000000F0) >> 4;
8141                 hba->auth_cfg.dh_group_priority[7] =
8142                     (cfg->current & 0x0000000F);
8143                 break;
8144 
8145         case CFG_AUTH_INTERVAL:
8146                 hba->auth_cfg.reauthenticate_time_interval = cfg->current;
8147                 break;
8148 #endif /* DHCHAP_SUPPORT */
8149 
8150         }
8151 
8152         return (FC_SUCCESS);
8153 
8154 } /* emlxs_set_parm() */
8155 
8156 
8157 /*
8158  * emlxs_mem_alloc  OS specific routine for memory allocation / mapping
8159  *
8160  * The buf_info->flags field describes the memory operation requested.
8161  *
8162  * FC_MBUF_PHYSONLY set  requests a supplied virtual address be mapped for DMA
8163  * Virtual address is supplied in buf_info->virt
8164  * DMA mapping flag is in buf_info->align
8165  * (DMA_READ_ONLY, DMA_WRITE_ONLY, DMA_READ_WRITE)
8166  * The mapped physical address is returned buf_info->phys
8167  *
8168  * FC_MBUF_PHYSONLY cleared requests memory be allocated for driver use and
8169  * if FC_MBUF_DMA is set the memory is also mapped for DMA
8170  * The byte alignment of the memory request is supplied in buf_info->align
8171  * The byte size of the memory request is supplied in buf_info->size
8172  * The virtual address is returned buf_info->virt
8173  * The mapped physical address is returned buf_info->phys (for FC_MBUF_DMA)
8174  */
8175 extern uint8_t *
8176 emlxs_mem_alloc(emlxs_hba_t *hba, MBUF_INFO *buf_info)
8177 {
8178         emlxs_port_t            *port = &PPORT;
8179         ddi_dma_attr_t          dma_attr;
8180         ddi_device_acc_attr_t   dev_attr;
8181         uint_t                  cookie_count;
8182         size_t                  dma_reallen;
8183         ddi_dma_cookie_t        dma_cookie;
8184         uint_t                  dma_flag;
8185         int                     status;
8186 
8187         dma_attr = hba->dma_attr_1sg;
8188         dev_attr = emlxs_data_acc_attr;
8189 
8190         if (buf_info->flags & FC_MBUF_SNGLSG) {
8191                 dma_attr.dma_attr_sgllen = 1;
8192         }
8193 
8194         if (buf_info->flags & FC_MBUF_DMA32) {
8195                 dma_attr.dma_attr_addr_hi = (uint64_t)0xffffffff;
8196         }
8197 
8198         if (buf_info->flags & FC_MBUF_PHYSONLY) {
8199 
8200                 if (buf_info->virt == NULL) {
8201                         goto done;
8202                 }
8203 
8204                 /*
8205                  * Allocate the DMA handle for this DMA object
8206                  */
8207                 status = ddi_dma_alloc_handle((void *)hba->dip,
8208                     &dma_attr, DDI_DMA_DONTWAIT,
8209                     NULL, (ddi_dma_handle_t *)&buf_info->dma_handle);
8210                 if (status != DDI_SUCCESS) {
8211                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_mem_alloc_failed_msg,
8212                             "ddi_dma_alloc_handle failed: size=%x align=%x "
8213                             "flags=%x", buf_info->size, buf_info->align,
8214                             buf_info->flags);
8215 
8216                         buf_info->phys = 0;
8217                         buf_info->dma_handle = 0;
8218                         goto done;
8219                 }
8220 
8221                 switch (buf_info->align) {
8222                 case DMA_READ_WRITE:
8223                         dma_flag = (DDI_DMA_RDWR | DDI_DMA_CONSISTENT);
8224                         break;
8225                 case DMA_READ_ONLY:
8226                         dma_flag = (DDI_DMA_READ | DDI_DMA_CONSISTENT);
8227                         break;
8228                 case DMA_WRITE_ONLY:
8229                         dma_flag = (DDI_DMA_WRITE | DDI_DMA_CONSISTENT);
8230                         break;
8231                 default:
8232                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_mem_alloc_failed_msg,
8233                             "Invalid DMA flag");
8234                         (void) ddi_dma_free_handle(
8235                             (ddi_dma_handle_t *)&buf_info->dma_handle);
8236                         buf_info->phys = 0;
8237                         buf_info->dma_handle = 0;
8238                         return ((uint8_t *)buf_info->virt);
8239                 }
8240 
8241                 /* Map this page of memory */
8242                 status = ddi_dma_addr_bind_handle(
8243                     (ddi_dma_handle_t)buf_info->dma_handle, NULL,
8244                     (caddr_t)buf_info->virt, (size_t)buf_info->size,
8245                     dma_flag, DDI_DMA_DONTWAIT, NULL, &dma_cookie,
8246                     &cookie_count);
8247 
8248                 if (status != DDI_DMA_MAPPED || (cookie_count > 1)) {
8249                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_mem_alloc_failed_msg,
8250                             "ddi_dma_addr_bind_handle failed: status=%x "
8251                             "count=%x flags=%x", status, cookie_count,
8252                             buf_info->flags);
8253 
8254                         (void) ddi_dma_free_handle(
8255                             (ddi_dma_handle_t *)&buf_info->dma_handle);
8256                         buf_info->phys = 0;
8257                         buf_info->dma_handle = 0;
8258                         goto done;
8259                 }
8260 
8261                 if (hba->bus_type == SBUS_FC) {
8262 
8263                         int32_t burstsizes_limit = 0xff;
8264                         int32_t ret_burst;
8265 
8266                         ret_burst = ddi_dma_burstsizes(
8267                             buf_info->dma_handle) & burstsizes_limit;
8268                         if (ddi_dma_set_sbus64(buf_info->dma_handle,
8269                             ret_burst) == DDI_FAILURE) {
8270                                 EMLXS_MSGF(EMLXS_CONTEXT,
8271                                     &emlxs_mem_alloc_failed_msg,
8272                                     "ddi_dma_set_sbus64 failed.");
8273                         }
8274                 }
8275 
8276                 /* Save Physical address */
8277                 buf_info->phys = dma_cookie.dmac_laddress;
8278 
8279                 /*
8280                  * Just to be sure, let's add this
8281                  */
8282                 EMLXS_MPDATA_SYNC((ddi_dma_handle_t)buf_info->dma_handle,
8283                     (off_t)0, (size_t)buf_info->size, DDI_DMA_SYNC_FORDEV);
8284 
8285         } else if (buf_info->flags & (FC_MBUF_DMA|FC_MBUF_DMA32)) {
8286 
8287                 dma_attr.dma_attr_align = buf_info->align;
8288 
8289                 /*
8290                  * Allocate the DMA handle for this DMA object
8291                  */
8292                 status = ddi_dma_alloc_handle((void *)hba->dip, &dma_attr,
8293                     DDI_DMA_DONTWAIT, NULL,
8294                     (ddi_dma_handle_t *)&buf_info->dma_handle);
8295                 if (status != DDI_SUCCESS) {
8296                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_mem_alloc_failed_msg,
8297                             "ddi_dma_alloc_handle failed: size=%x align=%x "
8298                             "flags=%x", buf_info->size, buf_info->align,
8299                             buf_info->flags);
8300 
8301                         buf_info->virt = NULL;
8302                         buf_info->phys = 0;
8303                         buf_info->data_handle = 0;
8304                         buf_info->dma_handle = 0;
8305                         goto done;
8306                 }
8307 
8308                 status = ddi_dma_mem_alloc(
8309                     (ddi_dma_handle_t)buf_info->dma_handle,
8310                     (size_t)buf_info->size, &dev_attr, DDI_DMA_CONSISTENT,
8311                     DDI_DMA_DONTWAIT, NULL, (caddr_t *)&buf_info->virt,
8312                     &dma_reallen, (ddi_acc_handle_t *)&buf_info->data_handle);
8313 
8314                 if ((status != DDI_SUCCESS) || (buf_info->size > dma_reallen)) {
8315                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_mem_alloc_failed_msg,
8316                             "ddi_dma_mem_alloc failed: size=%x align=%x "
8317                             "flags=%x", buf_info->size, buf_info->align,
8318                             buf_info->flags);
8319 
8320                         (void) ddi_dma_free_handle(
8321                             (ddi_dma_handle_t *)&buf_info->dma_handle);
8322 
8323                         buf_info->virt = NULL;
8324                         buf_info->phys = 0;
8325                         buf_info->data_handle = 0;
8326                         buf_info->dma_handle = 0;
8327                         goto done;
8328                 }
8329 
8330                 /* Map this page of memory */
8331                 status = ddi_dma_addr_bind_handle(
8332                     (ddi_dma_handle_t)buf_info->dma_handle, NULL,
8333                     (caddr_t)buf_info->virt, (size_t)buf_info->size,
8334                     DDI_DMA_RDWR | DDI_DMA_CONSISTENT, DDI_DMA_DONTWAIT, NULL,
8335                     &dma_cookie, &cookie_count);
8336 
8337                 if (status != DDI_DMA_MAPPED || (cookie_count > 1)) {
8338                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_mem_alloc_failed_msg,
8339                             "ddi_dma_addr_bind_handle failed: status=%x "
8340                             "count=%d size=%x align=%x flags=%x", status,
8341                             cookie_count, buf_info->size, buf_info->align,
8342                             buf_info->flags);
8343 
8344                         (void) ddi_dma_mem_free(
8345                             (ddi_acc_handle_t *)&buf_info->data_handle);
8346                         (void) ddi_dma_free_handle(
8347                             (ddi_dma_handle_t *)&buf_info->dma_handle);
8348 
8349                         buf_info->virt = NULL;
8350                         buf_info->phys = 0;
8351                         buf_info->dma_handle = 0;
8352                         buf_info->data_handle = 0;
8353                         goto done;
8354                 }
8355 
8356                 if (hba->bus_type == SBUS_FC) {
8357                         int32_t burstsizes_limit = 0xff;
8358                         int32_t ret_burst;
8359 
8360                         ret_burst =
8361                             ddi_dma_burstsizes(buf_info->
8362                             dma_handle) & burstsizes_limit;
8363                         if (ddi_dma_set_sbus64(buf_info->dma_handle,
8364                             ret_burst) == DDI_FAILURE) {
8365                                 EMLXS_MSGF(EMLXS_CONTEXT,
8366                                     &emlxs_mem_alloc_failed_msg,
8367                                     "ddi_dma_set_sbus64 failed.");
8368                         }
8369                 }
8370 
8371                 /* Save Physical address */
8372                 buf_info->phys = dma_cookie.dmac_laddress;
8373 
8374                 /* Just to be sure, let's add this */
8375                 EMLXS_MPDATA_SYNC((ddi_dma_handle_t)buf_info->dma_handle,
8376                     (off_t)0, (size_t)buf_info->size, DDI_DMA_SYNC_FORDEV);
8377 
8378         } else {        /* allocate virtual memory */
8379 
8380                 buf_info->virt =
8381                     kmem_zalloc((size_t)buf_info->size, KM_NOSLEEP);
8382                 buf_info->phys = 0;
8383                 buf_info->data_handle = 0;
8384                 buf_info->dma_handle = 0;
8385 
8386                 if (buf_info->virt == (uint32_t *)0) {
8387                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_mem_alloc_failed_msg,
8388                             "size=%x flags=%x", buf_info->size,
8389                             buf_info->flags);
8390                 }
8391 
8392         }
8393 
8394 done:
8395 
8396         return ((uint8_t *)buf_info->virt);
8397 
8398 } /* emlxs_mem_alloc() */
8399 
8400 
8401 
8402 /*
8403  * emlxs_mem_free:
8404  *
8405  * OS specific routine for memory de-allocation / unmapping
8406  *
8407  * The buf_info->flags field describes the memory operation requested.
8408  *
8409  * FC_MBUF_PHYSONLY set  requests a supplied virtual address be unmapped
8410  * for DMA, but not freed. The mapped physical address to be unmapped is in
8411  * buf_info->phys
8412  *
8413  * FC_MBUF_PHYSONLY cleared requests memory be freed and unmapped for DMA only
8414  * if FC_MBUF_DMA is set. The mapped physical address to be unmapped is in
8415  * buf_info->phys. The virtual address to be freed is in buf_info->virt
8416  */
8417 /*ARGSUSED*/
8418 extern void
8419 emlxs_mem_free(emlxs_hba_t *hba, MBUF_INFO *buf_info)
8420 {
8421         if (buf_info->flags & FC_MBUF_PHYSONLY) {
8422 
8423                 if (buf_info->dma_handle) {
8424                         (void) ddi_dma_unbind_handle(buf_info->dma_handle);
8425                         (void) ddi_dma_free_handle(
8426                             (ddi_dma_handle_t *)&buf_info->dma_handle);
8427                         buf_info->dma_handle = NULL;
8428                 }
8429 
8430         } else if (buf_info->flags & (FC_MBUF_DMA|FC_MBUF_DMA32)) {
8431 
8432                 if (buf_info->dma_handle) {
8433                         (void) ddi_dma_unbind_handle(buf_info->dma_handle);
8434                         (void) ddi_dma_mem_free(
8435                             (ddi_acc_handle_t *)&buf_info->data_handle);
8436                         (void) ddi_dma_free_handle(
8437                             (ddi_dma_handle_t *)&buf_info->dma_handle);
8438                         buf_info->dma_handle = NULL;
8439                         buf_info->data_handle = NULL;
8440                 }
8441 
8442         } else {        /* allocate virtual memory */
8443 
8444                 if (buf_info->virt) {
8445                         kmem_free(buf_info->virt, (size_t)buf_info->size);
8446                         buf_info->virt = NULL;
8447                 }
8448         }
8449 
8450 } /* emlxs_mem_free() */
8451 
8452 
8453 static int
8454 emlxs_select_fcp_channel(emlxs_hba_t *hba, NODELIST *ndlp, int reset)
8455 {
8456         int             channel;
8457         int             msi_id;
8458 
8459 
8460         /* IO to FCP2 device or a device reset always use fcp channel */
8461         if ((ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) || reset) {
8462                 return (hba->channel_fcp);
8463         }
8464 
8465 
8466         msi_id = emlxs_select_msiid(hba);
8467         channel = emlxs_msiid_to_chan(hba, msi_id);
8468 
8469 
8470 
8471         /* If channel is closed, then try fcp channel */
8472         if (ndlp->nlp_flag[channel] & NLP_CLOSED) {
8473                 channel = hba->channel_fcp;
8474         }
8475         return (channel);
8476 
8477 } /* emlxs_select_fcp_channel() */
8478 
8479 
8480 static int32_t
8481 emlxs_fast_target_reset(emlxs_port_t *port, emlxs_buf_t *sbp, NODELIST *ndlp)
8482 {
8483         emlxs_hba_t     *hba = HBA;
8484         fc_packet_t     *pkt;
8485         emlxs_config_t  *cfg;
8486         MAILBOXQ        *mbq;
8487         MAILBOX         *mb;
8488         uint32_t        rc;
8489 
8490         /*
8491          * This routine provides a alternative target reset provessing
8492          * method. Instead of sending an actual target reset to the
8493          * NPort, we will first unreg the login to that NPort. This
8494          * will cause all the outstanding IOs the quickly complete with
8495          * a NO RPI local error. Next we will force the ULP to relogin
8496          * to the NPort by sending an RSCN (for that NPort) to the
8497          * upper layer. This method should result in a fast target
8498          * reset, as far as IOs completing; however, since an actual
8499          * target reset is not sent to the NPort, it is not 100%
8500          * compatable. Things like reservations will not be broken.
8501          * By default this option is DISABLED, and its only enabled thru
8502          * a hidden configuration parameter (fast-tgt-reset).
8503          */
8504         rc = FC_TRAN_BUSY;
8505         pkt = PRIV2PKT(sbp);
8506         cfg = &CFG;
8507 
8508         if ((mbq = (MAILBOXQ *)emlxs_mem_get(hba, MEM_MBOX))) {
8509                 /* issue the mbox cmd to the sli */
8510                 mb = (MAILBOX *) mbq->mbox;
8511                 bzero((void *) mb, MAILBOX_CMD_BSIZE);
8512                 mb->un.varUnregLogin.rpi = (uint16_t)ndlp->nlp_Rpi;
8513 #ifdef SLI3_SUPPORT
8514                 mb->un.varUnregLogin.vpi = port->vpi;
8515 #endif  /* SLI3_SUPPORT */
8516                 mb->mbxCommand = MBX_UNREG_LOGIN;
8517                 mb->mbxOwner = OWN_HOST;
8518 
8519                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_msg,
8520                     "Fast Target Reset: unreg rpi=%d tmr=%d", ndlp->nlp_Rpi,
8521                     cfg[CFG_FAST_TGT_RESET_TMR].current);
8522 
8523                 if (EMLXS_SLI_ISSUE_MBOX_CMD(hba, mbq, MBX_WAIT, 0)
8524                     == MBX_SUCCESS) {
8525 
8526                         ndlp->nlp_Rpi = 0;
8527 
8528                         mutex_enter(&sbp->mtx);
8529                         sbp->node = (void *)ndlp;
8530                         sbp->did = ndlp->nlp_DID;
8531                         mutex_exit(&sbp->mtx);
8532 
8533                         if (pkt->pkt_rsplen) {
8534                                 bzero((uint8_t *)pkt->pkt_resp,
8535                                     pkt->pkt_rsplen);
8536                         }
8537                         if (cfg[CFG_FAST_TGT_RESET_TMR].current) {
8538                                 ndlp->nlp_force_rscn = hba->timer_tics +
8539                                     cfg[CFG_FAST_TGT_RESET_TMR].current;
8540                         }
8541 
8542                         emlxs_pkt_complete(sbp, IOSTAT_SUCCESS, 0, 0);
8543                 }
8544 
8545                 emlxs_mem_put(hba, MEM_MBOX, (void *)mbq);
8546                 rc = FC_SUCCESS;
8547         }
8548         return (rc);
8549 } /* emlxs_fast_target_reset() */
8550 
8551 static int32_t
8552 emlxs_send_fcp_cmd(emlxs_port_t *port, emlxs_buf_t *sbp, uint32_t *pkt_flags)
8553 {
8554         emlxs_hba_t     *hba = HBA;
8555         fc_packet_t     *pkt;
8556         emlxs_config_t  *cfg;
8557         IOCBQ           *iocbq;
8558         IOCB            *iocb;
8559         CHANNEL         *cp;
8560         NODELIST        *ndlp;
8561         char            *cmd;
8562         uint16_t        lun;
8563         FCP_CMND        *fcp_cmd;
8564         uint32_t        did;
8565         uint32_t        reset = 0;
8566         int             channel;
8567         int32_t         rval;
8568 
8569         pkt = PRIV2PKT(sbp);
8570         did = LE_SWAP24_LO(pkt->pkt_cmd_fhdr.d_id);
8571 
8572         /* Find target node object */
8573         ndlp = emlxs_node_find_did(port, did, 1);
8574 
8575         if (!ndlp || !ndlp->nlp_active) {
8576                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_failed_msg,
8577                     "Node not found. did=%x", did);
8578 
8579                 return (FC_BADPACKET);
8580         }
8581 
8582         /* When the fcp channel is closed we stop accepting any FCP cmd */
8583         if (ndlp->nlp_flag[hba->channel_fcp] & NLP_CLOSED) {
8584                 return (FC_TRAN_BUSY);
8585         }
8586 
8587         /* Snoop for target or lun reset first */
8588         /* We always use FCP channel to send out target/lun reset fcp cmds */
8589         /* interrupt affinity only applies to non tgt lun reset fcp cmd */
8590 
8591         cmd = (char *)pkt->pkt_cmd;
8592         lun = *((uint16_t *)cmd);
8593         lun = LE_SWAP16(lun);
8594 
8595         iocbq = &sbp->iocbq;
8596         iocb = &iocbq->iocb;
8597         iocbq->node = (void *) ndlp;
8598 
8599         /* Check for target reset */
8600         if (cmd[10] & 0x20) {
8601                 /* prepare iocb */
8602                 if ((rval = EMLXS_SLI_PREP_FCP_IOCB(port, sbp,
8603                     hba->channel_fcp)) != FC_SUCCESS) {
8604 
8605                         if (rval == 0xff) {
8606                                 emlxs_pkt_complete(sbp, IOSTAT_LOCAL_REJECT,
8607                                     0, 1);
8608                                 rval = FC_SUCCESS;
8609                         }
8610 
8611                         return (rval);
8612                 }
8613 
8614                 mutex_enter(&sbp->mtx);
8615                 sbp->pkt_flags |= PACKET_FCP_TGT_RESET;
8616                 sbp->pkt_flags |= PACKET_POLLED;
8617                 *pkt_flags = sbp->pkt_flags;
8618                 mutex_exit(&sbp->mtx);
8619 
8620 #ifdef SAN_DIAG_SUPPORT
8621                 emlxs_log_sd_scsi_event(port, SD_SCSI_SUBCATEGORY_TGTRESET,
8622                     (HBA_WWN *)&ndlp->nlp_portname, -1);
8623 #endif  /* SAN_DIAG_SUPPORT */
8624 
8625                 iocbq->flag |= IOCB_PRIORITY;
8626 
8627                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_msg,
8628                     "Target Reset: did=%x", did);
8629 
8630                 cfg = &CFG;
8631                 if (cfg[CFG_FAST_TGT_RESET].current) {
8632                         if (emlxs_fast_target_reset(port, sbp, ndlp) ==
8633                             FC_SUCCESS) {
8634                                 return (FC_SUCCESS);
8635                         }
8636                 }
8637 
8638                 /* Close the node for any further normal IO */
8639                 emlxs_node_close(port, ndlp, hba->channel_fcp,
8640                     pkt->pkt_timeout);
8641 
8642                 /* Flush the IO's on the tx queues */
8643                 (void) emlxs_tx_node_flush(port, ndlp,
8644                     &hba->chan[hba->channel_fcp], 0, sbp);
8645 
8646                 /* This is the target reset fcp cmd */
8647                 reset = 1;
8648         }
8649 
8650         /* Check for lun reset */
8651         else if (cmd[10] & 0x10) {
8652                 /* prepare iocb */
8653                 if ((rval = EMLXS_SLI_PREP_FCP_IOCB(port, sbp,
8654                     hba->channel_fcp)) != FC_SUCCESS) {
8655 
8656                         if (rval == 0xff) {
8657                                 emlxs_pkt_complete(sbp, IOSTAT_LOCAL_REJECT,
8658                                     0, 1);
8659                                 rval = FC_SUCCESS;
8660                         }
8661 
8662                         return (rval);
8663                 }
8664 
8665                 mutex_enter(&sbp->mtx);
8666                 sbp->pkt_flags |= PACKET_FCP_LUN_RESET;
8667                 sbp->pkt_flags |= PACKET_POLLED;
8668                 *pkt_flags = sbp->pkt_flags;
8669                 mutex_exit(&sbp->mtx);
8670 
8671 #ifdef SAN_DIAG_SUPPORT
8672                 emlxs_log_sd_scsi_event(port, SD_SCSI_SUBCATEGORY_LUNRESET,
8673                     (HBA_WWN *)&ndlp->nlp_portname, lun);
8674 #endif  /* SAN_DIAG_SUPPORT */
8675 
8676                 iocbq->flag |= IOCB_PRIORITY;
8677 
8678                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_msg,
8679                     "LUN Reset: did=%x lun=%02x LUN=%02x02x", did, lun,
8680                     cmd[0], cmd[1]);
8681 
8682                 /* Flush the IO's on the tx queues for this lun */
8683                 (void) emlxs_tx_lun_flush(port, ndlp, lun, sbp);
8684 
8685                 /* This is the lun reset fcp cmd */
8686                 reset = 1;
8687         }
8688 
8689         channel = emlxs_select_fcp_channel(hba, ndlp, reset);
8690 
8691 #ifdef SAN_DIAG_SUPPORT
8692         sbp->sd_start_time = gethrtime();
8693 #endif /* SAN_DIAG_SUPPORT */
8694 
8695 #if (EMLXS_MODREVX == EMLXS_MODREV2X)
8696         emlxs_swap_fcp_pkt(sbp);
8697 #endif  /* EMLXS_MODREV2X */
8698 
8699         fcp_cmd = (FCP_CMND *) pkt->pkt_cmd;
8700 
8701         if (fcp_cmd->fcpCntl1 == FCP_QTYPE_UNTAGGED) {
8702                 fcp_cmd->fcpCntl1 = FCP_QTYPE_SIMPLE;
8703         }
8704 
8705         if (reset == 0) {
8706                 /*
8707                  * tgt lun reset fcp cmd has been prepared
8708                  * separately in the beginning
8709                  */
8710                 if ((rval = EMLXS_SLI_PREP_FCP_IOCB(port, sbp,
8711                     channel)) != FC_SUCCESS) {
8712 
8713                         if (rval == 0xff) {
8714                                 emlxs_pkt_complete(sbp, IOSTAT_LOCAL_REJECT,
8715                                     0, 1);
8716                                 rval = FC_SUCCESS;
8717                         }
8718 
8719                         return (rval);
8720                 }
8721         }
8722 
8723         cp = &hba->chan[channel];
8724         cp->ulpSendCmd++;
8725 
8726         /* Initalize sbp */
8727         mutex_enter(&sbp->mtx);
8728         sbp->ticks = hba->timer_tics + pkt->pkt_timeout +
8729             ((pkt->pkt_timeout > 0xff) ? 0 : 10);
8730         sbp->node = (void *)ndlp;
8731         sbp->lun = lun;
8732         sbp->class = iocb->ULPCLASS;
8733         sbp->did = ndlp->nlp_DID;
8734         mutex_exit(&sbp->mtx);
8735 
8736         if (pkt->pkt_cmdlen) {
8737                 EMLXS_MPDATA_SYNC(pkt->pkt_cmd_dma, 0, pkt->pkt_cmdlen,
8738                     DDI_DMA_SYNC_FORDEV);
8739         }
8740 
8741         if (pkt->pkt_datalen && pkt->pkt_tran_type == FC_PKT_FCP_WRITE) {
8742                 EMLXS_MPDATA_SYNC(pkt->pkt_data_dma, 0, pkt->pkt_datalen,
8743                     DDI_DMA_SYNC_FORDEV);
8744         }
8745 
8746         HBASTATS.FcpIssued++;
8747 
8748         EMLXS_SLI_ISSUE_IOCB_CMD(hba, cp, iocbq);
8749         return (FC_SUCCESS);
8750 
8751 } /* emlxs_send_fcp_cmd() */
8752 
8753 
8754 
8755 
8756 /*
8757  * We have to consider this setup works for INTX, MSI, and MSIX
8758  * For INTX, intr_count is always 1
8759  * For MSI, intr_count is always 2 by default
8760  * For MSIX, intr_count is configurable (1, 2, 4, 8) for now.
8761  */
8762 extern int
8763 emlxs_select_msiid(emlxs_hba_t *hba)
8764 {
8765         int     msiid = 0;
8766 
8767         /* We use round-robin */
8768         mutex_enter(&EMLXS_MSIID_LOCK);
8769         if (hba->sli_mode == EMLXS_HBA_SLI4_MODE) {
8770                 msiid = hba->last_msiid;
8771                 hba->last_msiid ++;
8772                 if (hba->last_msiid >= hba->intr_count) {
8773                         hba->last_msiid = 0;
8774                 }
8775         } else {
8776                 /* This should work for INTX and MSI also */
8777                 /* For SLI3 the chan_count is always 4 */
8778                 /* For SLI3 the msiid is limited to chan_count */
8779                 msiid = hba->last_msiid;
8780                 hba->last_msiid ++;
8781                 if (hba->intr_count > hba->chan_count) {
8782                         if (hba->last_msiid >= hba->chan_count) {
8783                                 hba->last_msiid = 0;
8784                         }
8785                 } else {
8786                         if (hba->last_msiid >= hba->intr_count) {
8787                                 hba->last_msiid = 0;
8788                         }
8789                 }
8790         }
8791         mutex_exit(&EMLXS_MSIID_LOCK);
8792 
8793         return (msiid);
8794 } /* emlxs_select_msiid */
8795 
8796 
8797 /*
8798  * A channel has a association with a msi id.
8799  * One msi id could be associated with multiple channels.
8800  */
8801 extern int
8802 emlxs_msiid_to_chan(emlxs_hba_t *hba, int msi_id)
8803 {
8804         emlxs_config_t *cfg = &CFG;
8805         EQ_DESC_t *eqp;
8806         int chan;
8807         int num_wq;
8808 
8809         if (hba->sli_mode == EMLXS_HBA_SLI4_MODE) {
8810                 /* For SLI4 round robin all WQs associated with the msi_id */
8811                 eqp = &hba->sli.sli4.eq[msi_id];
8812 
8813                 mutex_enter(&eqp->lastwq_lock);
8814                 chan = eqp->lastwq;
8815                 eqp->lastwq++;
8816                 num_wq = cfg[CFG_NUM_WQ].current;
8817                 if (eqp->lastwq >= ((msi_id + 1) * num_wq)) {
8818                         eqp->lastwq -= num_wq;
8819                 }
8820                 mutex_exit(&eqp->lastwq_lock);
8821 
8822                 return (chan);
8823         } else {
8824                 /* This is for SLI3 mode */
8825                 return (hba->msi2chan[msi_id]);
8826         }
8827 
8828 } /* emlxs_msiid_to_chan */
8829 
8830 
8831 #ifdef SFCT_SUPPORT
8832 static int32_t
8833 emlxs_send_fct_status(emlxs_port_t *port, emlxs_buf_t *sbp)
8834 {
8835         emlxs_hba_t             *hba = HBA;
8836         IOCBQ                   *iocbq;
8837         IOCB                    *iocb;
8838         NODELIST                *ndlp;
8839         CHANNEL                 *cp;
8840         uint32_t                did;
8841 
8842         did = sbp->did;
8843         ndlp = sbp->node;
8844         cp = (CHANNEL *)sbp->channel;
8845 
8846         iocbq = &sbp->iocbq;
8847         iocb = &iocbq->iocb;
8848 
8849         /* Make sure node is still active */
8850         if (!ndlp->nlp_active) {
8851                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_failed_msg,
8852                     "*Node not found. did=%x", did);
8853 
8854                 return (FC_BADPACKET);
8855         }
8856 
8857         /* If gate is closed */
8858         if (ndlp->nlp_flag[hba->channel_fcp] & NLP_CLOSED) {
8859                 return (FC_TRAN_BUSY);
8860         }
8861 
8862         iocb->ULPCOMMAND = CMD_FCP_TRSP64_CX;
8863         if (EMLXS_SLI_PREP_FCT_IOCB(port, sbp, cp->channelno) !=
8864             IOERR_SUCCESS) {
8865                 return (FC_TRAN_BUSY);
8866         }
8867 
8868         HBASTATS.FcpIssued++;
8869 
8870         EMLXS_SLI_ISSUE_IOCB_CMD(hba, cp, iocbq);
8871 
8872         return (FC_SUCCESS);
8873 
8874 } /* emlxs_send_fct_status() */
8875 
8876 
8877 static int32_t
8878 emlxs_send_fct_abort(emlxs_port_t *port, emlxs_buf_t *sbp)
8879 {
8880         emlxs_hba_t     *hba = HBA;
8881         IOCBQ           *iocbq;
8882         IOCB            *iocb;
8883         NODELIST        *ndlp;
8884         CHANNEL         *cp;
8885         uint32_t        did;
8886 
8887         did = sbp->did;
8888         ndlp = sbp->node;
8889         cp = (CHANNEL *)sbp->channel;
8890 
8891         iocbq = &sbp->iocbq;
8892         iocb = &iocbq->iocb;
8893 
8894         /* Make sure node is still active */
8895         if ((ndlp == NULL) || (!ndlp->nlp_active)) {
8896                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_failed_msg,
8897                     "*Node not found. did=%x", did);
8898 
8899                 return (FC_BADPACKET);
8900         }
8901 
8902         /* If gate is closed */
8903         if (ndlp->nlp_flag[hba->channel_fcp] & NLP_CLOSED) {
8904                 return (FC_TRAN_BUSY);
8905         }
8906 
8907         iocb->ULPCOMMAND = CMD_ABORT_XRI_CX;
8908         if (EMLXS_SLI_PREP_FCT_IOCB(port, sbp, cp->channelno) !=
8909             IOERR_SUCCESS) {
8910                 return (FC_TRAN_BUSY);
8911         }
8912 
8913         EMLXS_SLI_ISSUE_IOCB_CMD(hba, sbp->channel, iocbq);
8914 
8915         return (FC_SUCCESS);
8916 
8917 } /* emlxs_send_fct_abort() */
8918 
8919 #endif /* SFCT_SUPPORT */
8920 
8921 
8922 static int32_t
8923 emlxs_send_ip(emlxs_port_t *port, emlxs_buf_t *sbp)
8924 {
8925         emlxs_hba_t     *hba = HBA;
8926         fc_packet_t     *pkt;
8927         IOCBQ           *iocbq;
8928         IOCB            *iocb;
8929         CHANNEL         *cp;
8930         uint32_t        i;
8931         NODELIST        *ndlp;
8932         uint32_t        did;
8933         int32_t         rval;
8934 
8935         pkt = PRIV2PKT(sbp);
8936         cp = &hba->chan[hba->channel_ip];
8937         did = LE_SWAP24_LO(pkt->pkt_cmd_fhdr.d_id);
8938 
8939         /* Check if node exists */
8940         /* Broadcast did is always a success */
8941         ndlp = emlxs_node_find_did(port, did, 1);
8942 
8943         if (!ndlp || !ndlp->nlp_active) {
8944                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_failed_msg,
8945                     "Node not found. did=0x%x", did);
8946 
8947                 return (FC_BADPACKET);
8948         }
8949 
8950         /* Check if gate is temporarily closed */
8951         if (ndlp->nlp_flag[hba->channel_ip] & NLP_CLOSED) {
8952                 return (FC_TRAN_BUSY);
8953         }
8954 
8955         /* Check if an exchange has been created */
8956         if ((ndlp->nlp_Xri == 0) && (did != BCAST_DID)) {
8957                 /* No exchange.  Try creating one */
8958                 (void) emlxs_create_xri(port, cp, ndlp);
8959 
8960                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_msg,
8961                     "Adapter Busy. Exchange not found. did=0x%x", did);
8962 
8963                 return (FC_TRAN_BUSY);
8964         }
8965 
8966         /* ULP PATCH: pkt_cmdlen was found to be set to zero */
8967         /* on BROADCAST commands */
8968         if (pkt->pkt_cmdlen == 0) {
8969                 /* Set the pkt_cmdlen to the cookie size */
8970 #if (EMLXS_MODREV >= EMLXS_MODREV3)
8971                 for (i = 0; i < pkt->pkt_cmd_cookie_cnt; i++) {
8972                         pkt->pkt_cmdlen += pkt->pkt_cmd_cookie[i].dmac_size;
8973                 }
8974 #else
8975                 pkt->pkt_cmdlen = pkt->pkt_cmd_cookie.dmac_size;
8976 #endif  /* >= EMLXS_MODREV3 */
8977 
8978         }
8979 
8980         iocbq = &sbp->iocbq;
8981         iocb = &iocbq->iocb;
8982 
8983         iocbq->node = (void *)ndlp;
8984         if ((rval = EMLXS_SLI_PREP_IP_IOCB(port, sbp)) != FC_SUCCESS) {
8985 
8986                 if (rval == 0xff) {
8987                         emlxs_pkt_complete(sbp, IOSTAT_LOCAL_REJECT, 0, 1);
8988                         rval = FC_SUCCESS;
8989                 }
8990 
8991                 return (rval);
8992         }
8993 
8994         cp->ulpSendCmd++;
8995 
8996         /* Initalize sbp */
8997         mutex_enter(&sbp->mtx);
8998         sbp->ticks = hba->timer_tics + pkt->pkt_timeout +
8999             ((pkt->pkt_timeout > 0xff) ? 0 : 10);
9000         sbp->node = (void *)ndlp;
9001         sbp->lun = EMLXS_LUN_NONE;
9002         sbp->class = iocb->ULPCLASS;
9003         sbp->did = did;
9004         mutex_exit(&sbp->mtx);
9005 
9006         if (pkt->pkt_cmdlen) {
9007                 EMLXS_MPDATA_SYNC(pkt->pkt_cmd_dma, 0, pkt->pkt_cmdlen,
9008                     DDI_DMA_SYNC_FORDEV);
9009         }
9010 
9011         EMLXS_SLI_ISSUE_IOCB_CMD(hba, cp, iocbq);
9012 
9013         return (FC_SUCCESS);
9014 
9015 } /* emlxs_send_ip() */
9016 
9017 
9018 static int32_t
9019 emlxs_send_els(emlxs_port_t *port, emlxs_buf_t *sbp)
9020 {
9021         emlxs_hba_t     *hba = HBA;
9022         emlxs_port_t    *vport;
9023         fc_packet_t     *pkt;
9024         IOCBQ           *iocbq;
9025         CHANNEL         *cp;
9026         SERV_PARM       *sp;
9027         uint32_t        cmd;
9028         int             i;
9029         ELS_PKT         *els_pkt;
9030         NODELIST        *ndlp;
9031         uint32_t        did;
9032         char            fcsp_msg[32];
9033         int             rc;
9034         int32_t         rval;
9035         emlxs_config_t  *cfg = &CFG;
9036 
9037         fcsp_msg[0] = 0;
9038         pkt = PRIV2PKT(sbp);
9039         els_pkt = (ELS_PKT *)pkt->pkt_cmd;
9040         did = LE_SWAP24_LO(pkt->pkt_cmd_fhdr.d_id);
9041 
9042         iocbq = &sbp->iocbq;
9043 
9044 #if (EMLXS_MODREVX == EMLXS_MODREV2X)
9045         emlxs_swap_els_pkt(sbp);
9046 #endif  /* EMLXS_MODREV2X */
9047 
9048         cmd = *((uint32_t *)pkt->pkt_cmd);
9049         cmd &= ELS_CMD_MASK;
9050 
9051         /* Point of no return, except for ADISC & PLOGI */
9052 
9053         /* Check node */
9054         switch (cmd) {
9055         case ELS_CMD_FLOGI:
9056         case ELS_CMD_FDISC:
9057                 if (hba->sli_mode == EMLXS_HBA_SLI4_MODE) {
9058 
9059                         if (emlxs_vpi_logi_notify(port, sbp)) {
9060                                 pkt->pkt_state = FC_PKT_LOCAL_RJT;
9061 #if (EMLXS_MODREVX == EMLXS_MODREV2X)
9062                                 emlxs_unswap_pkt(sbp);
9063 #endif  /* EMLXS_MODREV2X */
9064                                 return (FC_FAILURE);
9065                         }
9066                 } else {
9067                         /*
9068                          * If FLOGI is already complete, then we
9069                          * should not be receiving another FLOGI.
9070                          * Reset the link to recover.
9071                          */
9072                         if (port->flag & EMLXS_PORT_FLOGI_CMPL) {
9073                                 pkt->pkt_state = FC_PKT_LOCAL_RJT;
9074 #if (EMLXS_MODREVX == EMLXS_MODREV2X)
9075                                 emlxs_unswap_pkt(sbp);
9076 #endif  /* EMLXS_MODREV2X */
9077 
9078                                 (void) emlxs_reset(port, FC_FCA_LINK_RESET);
9079                                 return (FC_FAILURE);
9080                         }
9081 
9082                         if (port->vpi > 0) {
9083                                 *((uint32_t *)pkt->pkt_cmd) = ELS_CMD_FDISC;
9084                         }
9085                 }
9086 
9087                 /* Command may have been changed */
9088                 cmd = *((uint32_t *)pkt->pkt_cmd);
9089                 cmd &= ELS_CMD_MASK;
9090 
9091                 if (hba->flag & FC_NPIV_DELAY_REQUIRED) {
9092                         sbp->pkt_flags |= PACKET_DELAY_REQUIRED;
9093                 }
9094 
9095                 ndlp = NULL;
9096 
9097                 /* We will process these cmds at the bottom of this routine */
9098                 break;
9099 
9100         case ELS_CMD_PLOGI:
9101                 /* Make sure we don't log into ourself */
9102                 for (i = 0; i < MAX_VPORTS; i++) {
9103                         vport = &VPORT(i);
9104 
9105                         if (!(vport->flag & EMLXS_INI_BOUND)) {
9106                                 continue;
9107                         }
9108 
9109                         if (did == vport->did) {
9110                                 pkt->pkt_state = FC_PKT_NPORT_RJT;
9111 
9112 #if (EMLXS_MODREVX == EMLXS_MODREV2X)
9113                                 emlxs_unswap_pkt(sbp);
9114 #endif  /* EMLXS_MODREV2X */
9115 
9116                                 return (FC_FAILURE);
9117                         }
9118                 }
9119 
9120                 ndlp = NULL;
9121 
9122                 if (hba->flag & FC_PT_TO_PT) {
9123                         MAILBOXQ        *mbox;
9124 
9125                         /* ULP bug fix */
9126                         if (pkt->pkt_cmd_fhdr.s_id == 0) {
9127                                 pkt->pkt_cmd_fhdr.s_id = FP_DEFAULT_SID;
9128                                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_els_send_msg,
9129                                     "PLOGI: P2P Fix. sid=0-->%x did=%x",
9130                                     pkt->pkt_cmd_fhdr.s_id,
9131                                     pkt->pkt_cmd_fhdr.d_id);
9132                         }
9133 
9134                         mutex_enter(&EMLXS_PORT_LOCK);
9135                         port->did = LE_SWAP24_LO(pkt->pkt_cmd_fhdr.s_id);
9136                         port->rdid = LE_SWAP24_LO(pkt->pkt_cmd_fhdr.d_id);
9137                         mutex_exit(&EMLXS_PORT_LOCK);
9138 
9139                         if (hba->sli_mode <= EMLXS_HBA_SLI3_MODE) {
9140                                 /* Update our service parms */
9141                                 if ((mbox = (MAILBOXQ *)emlxs_mem_get(hba,
9142                                     MEM_MBOX))) {
9143                                         emlxs_mb_config_link(hba, mbox);
9144 
9145                                         rc =  EMLXS_SLI_ISSUE_MBOX_CMD(hba,
9146                                             mbox, MBX_NOWAIT, 0);
9147                                         if ((rc != MBX_BUSY) &&
9148                                             (rc != MBX_SUCCESS)) {
9149                                                 emlxs_mem_put(hba, MEM_MBOX,
9150                                                     (void *)mbox);
9151                                         }
9152                                 }
9153                         }
9154                 }
9155 
9156                 /* We will process these cmds at the bottom of this routine */
9157                 break;
9158 
9159         default:
9160                 ndlp = emlxs_node_find_did(port, did, 1);
9161 
9162                 /* If an ADISC is being sent and we have no node, */
9163                 /* then we must fail the ADISC now */
9164                 if (!ndlp && (cmd == ELS_CMD_ADISC) &&
9165                     (port->mode == MODE_INITIATOR)) {
9166 
9167                         /* Build the LS_RJT response */
9168                         els_pkt = (ELS_PKT *)pkt->pkt_resp;
9169                         els_pkt->elsCode = 0x01;
9170                         els_pkt->un.lsRjt.un.b.lsRjtRsvd0 = 0;
9171                         els_pkt->un.lsRjt.un.b.lsRjtRsnCode =
9172                             LSRJT_LOGICAL_ERR;
9173                         els_pkt->un.lsRjt.un.b.lsRjtRsnCodeExp =
9174                             LSEXP_NOTHING_MORE;
9175                         els_pkt->un.lsRjt.un.b.vendorUnique = 0x03;
9176 
9177                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_msg,
9178                             "ADISC Rejected. Node not found. did=0x%x", did);
9179 
9180                         if (sbp->channel == NULL) {
9181                                 if (hba->sli_mode == EMLXS_HBA_SLI4_MODE) {
9182                                         sbp->channel =
9183                                             &hba->chan[hba->channel_els];
9184                                 } else {
9185                                         sbp->channel =
9186                                             &hba->chan[FC_ELS_RING];
9187                                 }
9188                         }
9189 
9190                         /* Return this as rejected by the target */
9191                         emlxs_pkt_complete(sbp, IOSTAT_LS_RJT, 0, 1);
9192 
9193                         return (FC_SUCCESS);
9194                 }
9195         }
9196 
9197         /* DID == BCAST_DID is special case to indicate that */
9198         /* RPI is being passed in seq_id field */
9199         /* This is used by emlxs_send_logo() for target mode */
9200 
9201         /* Initalize iocbq */
9202         iocbq->node = (void *)ndlp;
9203         if ((rval = EMLXS_SLI_PREP_ELS_IOCB(port, sbp)) != FC_SUCCESS) {
9204 
9205                 if (rval == 0xff) {
9206                         emlxs_pkt_complete(sbp, IOSTAT_LOCAL_REJECT, 0, 1);
9207                         rval = FC_SUCCESS;
9208                 }
9209 
9210                 return (rval);
9211         }
9212 
9213         cp = &hba->chan[hba->channel_els];
9214         cp->ulpSendCmd++;
9215         sp = (SERV_PARM *)&els_pkt->un.logi;
9216 
9217         /* Check cmd */
9218         switch (cmd) {
9219         case ELS_CMD_PRLI:
9220                 /*
9221                  * if our firmware version is 3.20 or later,
9222                  * set the following bits for FC-TAPE support.
9223                  */
9224                 if ((port->mode == MODE_INITIATOR) &&
9225                     (hba->vpd.feaLevelHigh >= 0x02) &&
9226                     (cfg[CFG_ADISC_SUPPORT].current != 0)) {
9227                                 els_pkt->un.prli.ConfmComplAllowed = 1;
9228                                 els_pkt->un.prli.Retry = 1;
9229                                 els_pkt->un.prli.TaskRetryIdReq = 1;
9230                 } else {
9231                                 els_pkt->un.prli.ConfmComplAllowed = 0;
9232                                 els_pkt->un.prli.Retry = 0;
9233                                 els_pkt->un.prli.TaskRetryIdReq = 0;
9234                 }
9235 
9236                 break;
9237 
9238                 /* This is a patch for the ULP stack. */
9239 
9240                 /*
9241                  * ULP only reads our service parameters once during bind_port,
9242                  * but the service parameters change due to topology.
9243                  */
9244         case ELS_CMD_FLOGI:
9245         case ELS_CMD_FDISC:
9246         case ELS_CMD_PLOGI:
9247         case ELS_CMD_PDISC:
9248                 /* Copy latest service parameters to payload */
9249                 bcopy((void *) &port->sparam, (void *)sp, sizeof (SERV_PARM));
9250 
9251                 if ((cmd == ELS_CMD_FLOGI) || (cmd == ELS_CMD_FDISC)) {
9252 
9253                         /* Clear support for virtual fabrics */
9254                         /* randomOffset bit controls this for FLOGI */
9255                         sp->cmn.randomOffset = 0;
9256 
9257                         /* Set R_A_TOV to current value */
9258                         sp->cmn.w2.r_a_tov =
9259                             LE_SWAP32((hba->fc_ratov * 1000));
9260                 }
9261 
9262                 if ((hba->flag & FC_NPIV_ENABLED) &&
9263                     (hba->flag & FC_NPIV_SUPPORTED) &&
9264                     (cmd == ELS_CMD_PLOGI)) {
9265                         emlxs_vvl_fmt_t *vvl;
9266 
9267                         sp->VALID_VENDOR_VERSION = 1;
9268                         vvl = (emlxs_vvl_fmt_t *)&sp->vendorVersion[0];
9269                         vvl->un0.w0.oui = 0x0000C9;
9270                         vvl->un0.word0 = LE_SWAP32(vvl->un0.word0);
9271                         vvl->un1.w1.vport =  (port->vpi > 0) ? 1 : 0;
9272                         vvl->un1.word1 = LE_SWAP32(vvl->un1.word1);
9273                 }
9274 
9275 #ifdef DHCHAP_SUPPORT
9276                 emlxs_dhc_init_sp(port, did, sp, (char **)&fcsp_msg);
9277 #endif  /* DHCHAP_SUPPORT */
9278 
9279                 break;
9280         }
9281 
9282         /* Initialize the sbp */
9283         mutex_enter(&sbp->mtx);
9284         sbp->ticks = hba->timer_tics + pkt->pkt_timeout +
9285             ((pkt->pkt_timeout > 0xff) ? 0 : 10);
9286         sbp->node = (void *)ndlp;
9287         sbp->lun = EMLXS_LUN_NONE;
9288         sbp->did = did;
9289         mutex_exit(&sbp->mtx);
9290 
9291         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_els_send_msg, "%s: sid=%x did=%x %s",
9292             emlxs_elscmd_xlate(cmd), port->did, did, fcsp_msg);
9293 
9294         if (pkt->pkt_cmdlen) {
9295                 EMLXS_MPDATA_SYNC(pkt->pkt_cmd_dma, 0, pkt->pkt_cmdlen,
9296                     DDI_DMA_SYNC_FORDEV);
9297         }
9298 
9299         /* Check node */
9300         switch (cmd) {
9301         case ELS_CMD_FLOGI:
9302         case ELS_CMD_FDISC:
9303                 if (port->mode == MODE_INITIATOR) {
9304                         /* Make sure fabric node is destroyed */
9305                         /* It should already have been destroyed at link down */
9306                         if (hba->sli_mode != EMLXS_HBA_SLI4_MODE) {
9307                                 ndlp = emlxs_node_find_did(port, FABRIC_DID, 1);
9308                                 if (ndlp) {
9309                                         if (EMLXS_SLI_UNREG_NODE(port, ndlp,
9310                                             NULL, NULL, iocbq) == 0) {
9311                                                 /* Deferring iocb tx until */
9312                                                 /* completion of unreg */
9313                                                 return (FC_SUCCESS);
9314                                         }
9315                                 }
9316                         }
9317                 }
9318                 break;
9319 
9320         case ELS_CMD_PLOGI:
9321 
9322                 ndlp = emlxs_node_find_did(port, did, 1);
9323 
9324                 if (ndlp && ndlp->nlp_active) {
9325                         /* Close the node for any further normal IO */
9326                         emlxs_node_close(port, ndlp, hba->channel_fcp,
9327                             pkt->pkt_timeout + 10);
9328                         emlxs_node_close(port, ndlp, hba->channel_ip,
9329                             pkt->pkt_timeout + 10);
9330 
9331                         /* Flush tx queues */
9332                         (void) emlxs_tx_node_flush(port, ndlp, 0, 0, 0);
9333 
9334                         /* Flush chip queues */
9335                         (void) emlxs_chipq_node_flush(port, 0, ndlp, 0);
9336                 }
9337 
9338                 break;
9339 
9340         case ELS_CMD_PRLI:
9341 
9342                 ndlp = emlxs_node_find_did(port, did, 1);
9343 
9344                 if (ndlp && ndlp->nlp_active) {
9345                         /*
9346                          * Close the node for any further FCP IO;
9347                          * Flush all outstanding I/O only if
9348                          * "Establish Image Pair" bit is set.
9349                          */
9350                         emlxs_node_close(port, ndlp, hba->channel_fcp,
9351                             pkt->pkt_timeout + 10);
9352 
9353                         if (els_pkt->un.prli.estabImagePair) {
9354                                 /* Flush tx queues */
9355                                 (void) emlxs_tx_node_flush(port, ndlp,
9356                                     &hba->chan[hba->channel_fcp], 0, 0);
9357 
9358                                 /* Flush chip queues */
9359                                 (void) emlxs_chipq_node_flush(port,
9360                                     &hba->chan[hba->channel_fcp], ndlp, 0);
9361                         }
9362                 }
9363 
9364                 break;
9365 
9366         }
9367 
9368         HBASTATS.ElsCmdIssued++;
9369 
9370         EMLXS_SLI_ISSUE_IOCB_CMD(hba, cp, iocbq);
9371 
9372         return (FC_SUCCESS);
9373 
9374 } /* emlxs_send_els() */
9375 
9376 
9377 
9378 
9379 static int32_t
9380 emlxs_send_els_rsp(emlxs_port_t *port, emlxs_buf_t *sbp)
9381 {
9382         emlxs_hba_t     *hba = HBA;
9383         emlxs_config_t  *cfg = &CFG;
9384         fc_packet_t     *pkt;
9385         IOCBQ           *iocbq;
9386         IOCB            *iocb;
9387         NODELIST        *ndlp;
9388         CHANNEL         *cp;
9389         int             i;
9390         uint32_t        cmd;
9391         uint32_t        ucmd;
9392         ELS_PKT         *els_pkt;
9393         fc_unsol_buf_t  *ubp;
9394         emlxs_ub_priv_t *ub_priv;
9395         uint32_t        did;
9396         char            fcsp_msg[32];
9397         uint8_t         *ub_buffer;
9398         int32_t         rval;
9399 
9400         fcsp_msg[0] = 0;
9401         pkt = PRIV2PKT(sbp);
9402         els_pkt = (ELS_PKT *)pkt->pkt_cmd;
9403         did = LE_SWAP24_LO(pkt->pkt_cmd_fhdr.d_id);
9404 
9405         iocbq = &sbp->iocbq;
9406         iocb = &iocbq->iocb;
9407 
9408         /* Acquire the unsolicited command this pkt is replying to */
9409         if (pkt->pkt_cmd_fhdr.ox_id < EMLXS_UB_TOKEN_OFFSET) {
9410                 /* This is for auto replies when no ub's are used */
9411                 ucmd = pkt->pkt_cmd_fhdr.ox_id << ELS_CMD_SHIFT;
9412                 ubp = NULL;
9413                 ub_priv = NULL;
9414                 ub_buffer = NULL;
9415 
9416 #ifdef SFCT_SUPPORT
9417                 if (sbp->fct_cmd) {
9418                         fct_els_t *els =
9419                             (fct_els_t *)sbp->fct_cmd->cmd_specific;
9420                         ub_buffer = (uint8_t *)els->els_req_payload;
9421                 }
9422 #endif /* SFCT_SUPPORT */
9423 
9424         } else {
9425                 /* Find the ub buffer that goes with this reply */
9426                 if (!(ubp = emlxs_ub_find(port, pkt->pkt_cmd_fhdr.ox_id))) {
9427                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_error_msg,
9428                             "ELS reply: Invalid oxid=%x",
9429                             pkt->pkt_cmd_fhdr.ox_id);
9430                         return (FC_BADPACKET);
9431                 }
9432 
9433                 ub_buffer = (uint8_t *)ubp->ub_buffer;
9434                 ub_priv = ubp->ub_fca_private;
9435                 ucmd = ub_priv->cmd;
9436 
9437                 ub_priv->flags |= EMLXS_UB_REPLY;
9438 
9439                 /* Reset oxid to ELS command */
9440                 /* We do this because the ub is only valid */
9441                 /* until we return from this thread */
9442                 pkt->pkt_cmd_fhdr.ox_id = (ucmd >> ELS_CMD_SHIFT) & 0xff;
9443         }
9444 
9445         /* Save the result */
9446         sbp->ucmd = ucmd;
9447 
9448         if (sbp->channel == NULL) {
9449                 if (hba->sli_mode == EMLXS_HBA_SLI4_MODE) {
9450                         sbp->channel = &hba->chan[hba->channel_els];
9451                 } else {
9452                         sbp->channel = &hba->chan[FC_ELS_RING];
9453                 }
9454         }
9455 
9456         /* Check for interceptions */
9457         switch (ucmd) {
9458 
9459 #ifdef ULP_PATCH2
9460         case ELS_CMD_LOGO:
9461                 if (!(cfg[CFG_ENABLE_PATCH].current & ULP_PATCH2)) {
9462                         break;
9463                 }
9464 
9465                 /* Check if this was generated by ULP and not us */
9466                 if (!(sbp->pkt_flags & PACKET_ALLOCATED)) {
9467 
9468                         /*
9469                          * Since we replied to this already,
9470                          * we won't need to send this now
9471                          */
9472                         emlxs_pkt_complete(sbp, IOSTAT_SUCCESS, 0, 1);
9473 
9474                         return (FC_SUCCESS);
9475                 }
9476 
9477                 break;
9478 #endif /* ULP_PATCH2 */
9479 
9480 #ifdef ULP_PATCH3
9481         case ELS_CMD_PRLI:
9482                 if (!(cfg[CFG_ENABLE_PATCH].current & ULP_PATCH3)) {
9483                         break;
9484                 }
9485 
9486                 /* Check if this was generated by ULP and not us */
9487                 if (!(sbp->pkt_flags & PACKET_ALLOCATED)) {
9488 
9489                         /*
9490                          * Since we replied to this already,
9491                          * we won't need to send this now
9492                          */
9493                         emlxs_pkt_complete(sbp, IOSTAT_SUCCESS, 0, 1);
9494 
9495                         return (FC_SUCCESS);
9496                 }
9497 
9498                 break;
9499 #endif /* ULP_PATCH3 */
9500 
9501 
9502 #ifdef ULP_PATCH4
9503         case ELS_CMD_PRLO:
9504                 if (!(cfg[CFG_ENABLE_PATCH].current & ULP_PATCH4)) {
9505                         break;
9506                 }
9507 
9508                 /* Check if this was generated by ULP and not us */
9509                 if (!(sbp->pkt_flags & PACKET_ALLOCATED)) {
9510                         /*
9511                          * Since we replied to this already,
9512                          * we won't need to send this now
9513                          */
9514                         emlxs_pkt_complete(sbp, IOSTAT_SUCCESS, 0, 1);
9515 
9516                         return (FC_SUCCESS);
9517                 }
9518 
9519                 break;
9520 #endif /* ULP_PATCH4 */
9521 
9522 #ifdef ULP_PATCH6
9523         case ELS_CMD_RSCN:
9524                 if (!(cfg[CFG_ENABLE_PATCH].current & ULP_PATCH6)) {
9525                         break;
9526                 }
9527 
9528                 /* Check if this RSCN was generated by us */
9529                 if (ub_priv && (ub_priv->flags & EMLXS_UB_INTERCEPT)) {
9530                         cmd = *((uint32_t *)pkt->pkt_cmd);
9531                         cmd = LE_SWAP32(cmd);
9532                         cmd &= ELS_CMD_MASK;
9533 
9534                         /*
9535                          * If ULP is accepting this,
9536                          * then close affected node
9537                          */
9538                         if ((port->mode == MODE_INITIATOR) && ub_buffer &&
9539                             cmd == ELS_CMD_ACC) {
9540                                 fc_rscn_t       *rscn;
9541                                 uint32_t        count;
9542                                 uint32_t        *lp;
9543 
9544                                 /*
9545                                  * Only the Leadville code path will
9546                                  * come thru here. The RSCN data is NOT
9547                                  * swapped properly for the Comstar code
9548                                  * path.
9549                                  */
9550                                 lp = (uint32_t *)ub_buffer;
9551                                 rscn = (fc_rscn_t *)lp++;
9552                                 count =
9553                                     ((rscn->rscn_payload_len - 4) / 4);
9554 
9555                                 /* Close affected ports */
9556                                 for (i = 0; i < count; i++, lp++) {
9557                                         (void) emlxs_port_offline(port,
9558                                             *lp);
9559                                 }
9560                         }
9561 
9562                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_els_reply_msg,
9563                             "RSCN %s: did=%x oxid=%x rxid=%x. "
9564                             "Intercepted.", emlxs_elscmd_xlate(cmd),
9565                             did, pkt->pkt_cmd_fhdr.ox_id,
9566                             pkt->pkt_cmd_fhdr.rx_id);
9567 
9568                         /*
9569                          * Since we generated this RSCN,
9570                          * we won't need to send this reply
9571                          */
9572                         emlxs_pkt_complete(sbp, IOSTAT_SUCCESS, 0, 1);
9573 
9574                         return (FC_SUCCESS);
9575                 }
9576 
9577                 break;
9578 #endif /* ULP_PATCH6 */
9579 
9580         case ELS_CMD_PLOGI:
9581                 /* Check if this PLOGI was generated by us */
9582                 if (ub_priv && (ub_priv->flags & EMLXS_UB_INTERCEPT)) {
9583                         cmd = *((uint32_t *)pkt->pkt_cmd);
9584                         cmd = LE_SWAP32(cmd);
9585                         cmd &= ELS_CMD_MASK;
9586 
9587                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_els_reply_msg,
9588                             "PLOGI %s: did=%x oxid=%x rxid=%x. "
9589                             "Intercepted.", emlxs_elscmd_xlate(cmd),
9590                             did, pkt->pkt_cmd_fhdr.ox_id,
9591                             pkt->pkt_cmd_fhdr.rx_id);
9592 
9593                         /*
9594                          * Since we generated this PLOGI,
9595                          * we won't need to send this reply
9596                          */
9597                         emlxs_pkt_complete(sbp, IOSTAT_SUCCESS, 0, 1);
9598 
9599                         return (FC_SUCCESS);
9600                 }
9601 
9602                 break;
9603         }
9604 
9605 #if (EMLXS_MODREVX == EMLXS_MODREV2X)
9606         emlxs_swap_els_pkt(sbp);
9607 #endif  /* EMLXS_MODREV2X */
9608 
9609 
9610         cmd = *((uint32_t *)pkt->pkt_cmd);
9611         cmd &= ELS_CMD_MASK;
9612 
9613         /* Check if modifications are needed */
9614         switch (ucmd) {
9615         case (ELS_CMD_PRLI):
9616 
9617                 if (cmd == ELS_CMD_ACC) {
9618                         /* This is a patch for the ULP stack. */
9619                         /* ULP does not keep track of FCP2 support */
9620                         if ((port->mode == MODE_INITIATOR) &&
9621                             (hba->vpd.feaLevelHigh >= 0x02) &&
9622                             (cfg[CFG_ADISC_SUPPORT].current != 0)) {
9623                                 els_pkt->un.prli.ConfmComplAllowed = 1;
9624                                 els_pkt->un.prli.Retry = 1;
9625                                 els_pkt->un.prli.TaskRetryIdReq = 1;
9626                         } else {
9627                                 els_pkt->un.prli.ConfmComplAllowed = 0;
9628                                 els_pkt->un.prli.Retry = 0;
9629                                 els_pkt->un.prli.TaskRetryIdReq = 0;
9630                         }
9631                 }
9632 
9633                 break;
9634 
9635         case ELS_CMD_FLOGI:
9636         case ELS_CMD_FDISC:
9637                 if (cmd == ELS_CMD_ACC) {
9638                         SERV_PARM *sp = (SERV_PARM *)&els_pkt->un.logi;
9639 
9640                         /* This is a patch for the ULP stack. */
9641 
9642                         /*
9643                          * ULP only reads our service parameters
9644                          * once during bind_port, but the service
9645                          * parameters change due to topology.
9646                          */
9647 
9648                         /* Copy latest service parameters to payload */
9649                         bcopy((void *)&port->sparam,
9650                             (void *)sp, sizeof (SERV_PARM));
9651 
9652                         /* We are in pt-to-pt mode. Set R_A_TOV to default */
9653                         sp->cmn.w2.r_a_tov =
9654                             LE_SWAP32((FF_DEF_RATOV * 1000));
9655 
9656                         /* Clear support for virtual fabrics */
9657                         /* randomOffset bit controls this for FLOGI */
9658                         sp->cmn.randomOffset = 0;
9659 #ifdef DHCHAP_SUPPORT
9660                         emlxs_dhc_init_sp(port, did, sp, (char **)&fcsp_msg);
9661 #endif  /* DHCHAP_SUPPORT */
9662                 }
9663                 break;
9664 
9665         case ELS_CMD_PLOGI:
9666         case ELS_CMD_PDISC:
9667                 if (cmd == ELS_CMD_ACC) {
9668                         SERV_PARM *sp = (SERV_PARM *)&els_pkt->un.logi;
9669 
9670                         /* This is a patch for the ULP stack. */
9671 
9672                         /*
9673                          * ULP only reads our service parameters
9674                          * once during bind_port, but the service
9675                          * parameters change due to topology.
9676                          */
9677 
9678                         /* Copy latest service parameters to payload */
9679                         bcopy((void *)&port->sparam,
9680                             (void *)sp, sizeof (SERV_PARM));
9681 
9682 #ifdef DHCHAP_SUPPORT
9683                         emlxs_dhc_init_sp(port, did, sp, (char **)&fcsp_msg);
9684 #endif  /* DHCHAP_SUPPORT */
9685                 }
9686                 break;
9687 
9688         }
9689 
9690         /* Initalize iocbq */
9691         iocbq->node = (void *)NULL;
9692         if ((rval = EMLXS_SLI_PREP_ELS_IOCB(port, sbp)) != FC_SUCCESS) {
9693 
9694                 if (rval == 0xff) {
9695                         emlxs_pkt_complete(sbp, IOSTAT_LOCAL_REJECT, 0, 1);
9696                         rval = FC_SUCCESS;
9697                 }
9698 
9699                 return (rval);
9700         }
9701 
9702         cp = &hba->chan[hba->channel_els];
9703         cp->ulpSendCmd++;
9704 
9705         /* Initalize sbp */
9706         mutex_enter(&sbp->mtx);
9707         sbp->ticks = hba->timer_tics + pkt->pkt_timeout +
9708             ((pkt->pkt_timeout > 0xff) ? 0 : 10);
9709         sbp->node = (void *) NULL;
9710         sbp->lun = EMLXS_LUN_NONE;
9711         sbp->class = iocb->ULPCLASS;
9712         sbp->did = did;
9713         mutex_exit(&sbp->mtx);
9714 
9715         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_els_reply_msg,
9716             "%s %s: did=%x oxid=%x rxid=%x %s", emlxs_elscmd_xlate(ucmd),
9717             emlxs_elscmd_xlate(cmd), did, pkt->pkt_cmd_fhdr.ox_id,
9718             pkt->pkt_cmd_fhdr.rx_id, fcsp_msg);
9719 
9720         /* Process nodes */
9721         switch (ucmd) {
9722         case ELS_CMD_RSCN:
9723                 if ((port->mode == MODE_INITIATOR) && ub_buffer &&
9724                     cmd == ELS_CMD_ACC) {
9725                         fc_rscn_t       *rscn;
9726                         uint32_t        count;
9727                         uint32_t        *lp = NULL;
9728 
9729                         /*
9730                          * Only the Leadville code path will come thru
9731                          * here. The RSCN data is NOT swapped properly
9732                          * for the Comstar code path.
9733                          */
9734                         lp = (uint32_t *)ub_buffer;
9735                         rscn = (fc_rscn_t *)lp++;
9736                         count = ((rscn->rscn_payload_len - 4) / 4);
9737 
9738                         /* Close affected ports */
9739                         for (i = 0; i < count; i++, lp++) {
9740                                 (void) emlxs_port_offline(port, *lp);
9741                         }
9742                 }
9743                 break;
9744 
9745         case ELS_CMD_PLOGI:
9746                 if (cmd == ELS_CMD_ACC) {
9747                         ndlp = emlxs_node_find_did(port, did, 1);
9748 
9749                         if (ndlp && ndlp->nlp_active) {
9750                                 /* Close the node for any further normal IO */
9751                                 emlxs_node_close(port, ndlp, hba->channel_fcp,
9752                                     pkt->pkt_timeout + 10);
9753                                 emlxs_node_close(port, ndlp, hba->channel_ip,
9754                                     pkt->pkt_timeout + 10);
9755 
9756                                 /* Flush tx queue */
9757                                 (void) emlxs_tx_node_flush(port, ndlp, 0, 0, 0);
9758 
9759                                 /* Flush chip queue */
9760                                 (void) emlxs_chipq_node_flush(port, 0, ndlp, 0);
9761                         }
9762                 }
9763                 break;
9764 
9765         case ELS_CMD_PRLI:
9766                 if (cmd == ELS_CMD_ACC) {
9767                         ndlp = emlxs_node_find_did(port, did, 1);
9768 
9769                         if (ndlp && ndlp->nlp_active) {
9770                                 /* Close the node for any further normal IO */
9771                                 emlxs_node_close(port, ndlp, hba->channel_fcp,
9772                                     pkt->pkt_timeout + 10);
9773 
9774                                 /* Flush tx queues */
9775                                 (void) emlxs_tx_node_flush(port, ndlp,
9776                                     &hba->chan[hba->channel_fcp], 0, 0);
9777 
9778                                 /* Flush chip queues */
9779                                 (void) emlxs_chipq_node_flush(port,
9780                                     &hba->chan[hba->channel_fcp], ndlp, 0);
9781                         }
9782                 }
9783                 break;
9784 
9785         case ELS_CMD_PRLO:
9786                 if (cmd == ELS_CMD_ACC) {
9787                         ndlp = emlxs_node_find_did(port, did, 1);
9788 
9789                         if (ndlp && ndlp->nlp_active) {
9790                                 /* Close the node for any further normal IO */
9791                                 emlxs_node_close(port, ndlp,
9792                                     hba->channel_fcp, 60);
9793 
9794                                 /* Flush tx queues */
9795                                 (void) emlxs_tx_node_flush(port, ndlp,
9796                                     &hba->chan[hba->channel_fcp], 0, 0);
9797 
9798                                 /* Flush chip queues */
9799                                 (void) emlxs_chipq_node_flush(port,
9800                                     &hba->chan[hba->channel_fcp], ndlp, 0);
9801                         }
9802                 }
9803 
9804                 break;
9805 
9806         case ELS_CMD_LOGO:
9807                 if (cmd == ELS_CMD_ACC) {
9808                         ndlp = emlxs_node_find_did(port, did, 1);
9809 
9810                         if (ndlp && ndlp->nlp_active) {
9811                                 /* Close the node for any further normal IO */
9812                                 emlxs_node_close(port, ndlp,
9813                                     hba->channel_fcp, 60);
9814                                 emlxs_node_close(port, ndlp,
9815                                     hba->channel_ip, 60);
9816 
9817                                 /* Flush tx queues */
9818                                 (void) emlxs_tx_node_flush(port, ndlp, 0, 0, 0);
9819 
9820                                 /* Flush chip queues */
9821                                 (void) emlxs_chipq_node_flush(port, 0, ndlp, 0);
9822                         }
9823                 }
9824 
9825                 break;
9826         }
9827 
9828         if (pkt->pkt_cmdlen) {
9829                 EMLXS_MPDATA_SYNC(pkt->pkt_cmd_dma, 0, pkt->pkt_cmdlen,
9830                     DDI_DMA_SYNC_FORDEV);
9831         }
9832 
9833         HBASTATS.ElsRspIssued++;
9834 
9835         EMLXS_SLI_ISSUE_IOCB_CMD(hba, cp, iocbq);
9836 
9837         return (FC_SUCCESS);
9838 
9839 } /* emlxs_send_els_rsp() */
9840 
9841 
9842 #ifdef MENLO_SUPPORT
9843 static int32_t
9844 emlxs_send_menlo(emlxs_port_t *port, emlxs_buf_t *sbp)
9845 {
9846         emlxs_hba_t     *hba = HBA;
9847         fc_packet_t     *pkt;
9848         IOCBQ           *iocbq;
9849         IOCB            *iocb;
9850         CHANNEL         *cp;
9851         NODELIST        *ndlp;
9852         uint32_t        did;
9853         uint32_t        *lp;
9854         int32_t         rval;
9855 
9856         pkt = PRIV2PKT(sbp);
9857         did = EMLXS_MENLO_DID;
9858         lp = (uint32_t *)pkt->pkt_cmd;
9859 
9860         iocbq = &sbp->iocbq;
9861         iocb = &iocbq->iocb;
9862 
9863         ndlp = emlxs_node_find_did(port, did, 1);
9864 
9865         if (!ndlp || !ndlp->nlp_active) {
9866                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_failed_msg,
9867                     "Node not found. did=0x%x", did);
9868 
9869                 return (FC_BADPACKET);
9870         }
9871 
9872         iocbq->node = (void *) ndlp;
9873         if ((rval = EMLXS_SLI_PREP_CT_IOCB(port, sbp)) != FC_SUCCESS) {
9874 
9875                 if (rval == 0xff) {
9876                         emlxs_pkt_complete(sbp, IOSTAT_LOCAL_REJECT, 0, 1);
9877                         rval = FC_SUCCESS;
9878                 }
9879 
9880                 return (rval);
9881         }
9882 
9883         cp = &hba->chan[hba->channel_ct];
9884         cp->ulpSendCmd++;
9885 
9886         if (pkt->pkt_tran_type == FC_PKT_EXCHANGE) {
9887                 /* Cmd phase */
9888 
9889                 /* Initalize iocb */
9890                 iocb->un.genreq64.param = pkt->pkt_cmd_fhdr.d_id;
9891                 iocb->ULPCONTEXT = 0;
9892                 iocb->ULPPU = 3;
9893 
9894                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_ct_send_msg,
9895                     "%s: [%08x,%08x,%08x,%08x]",
9896                     emlxs_menlo_cmd_xlate(BE_SWAP32(lp[0])), BE_SWAP32(lp[1]),
9897                     BE_SWAP32(lp[2]), BE_SWAP32(lp[3]), BE_SWAP32(lp[4]));
9898 
9899         } else {        /* FC_PKT_OUTBOUND */
9900 
9901                 /* MENLO_CMD_FW_DOWNLOAD Data Phase */
9902                 iocb->ULPCOMMAND = CMD_GEN_REQUEST64_CX;
9903 
9904                 /* Initalize iocb */
9905                 iocb->un.genreq64.param = 0;
9906                 iocb->ULPCONTEXT = pkt->pkt_cmd_fhdr.rx_id;
9907                 iocb->ULPPU = 1;
9908 
9909                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_ct_send_msg,
9910                     "%s: Data: rxid=0x%x size=%d",
9911                     emlxs_menlo_cmd_xlate(MENLO_CMD_FW_DOWNLOAD),
9912                     pkt->pkt_cmd_fhdr.rx_id, pkt->pkt_cmdlen);
9913         }
9914 
9915         /* Initalize sbp */
9916         mutex_enter(&sbp->mtx);
9917         sbp->ticks = hba->timer_tics + pkt->pkt_timeout +
9918             ((pkt->pkt_timeout > 0xff) ? 0 : 10);
9919         sbp->node = (void *) ndlp;
9920         sbp->lun = EMLXS_LUN_NONE;
9921         sbp->class = iocb->ULPCLASS;
9922         sbp->did = did;
9923         mutex_exit(&sbp->mtx);
9924 
9925         EMLXS_MPDATA_SYNC(pkt->pkt_cmd_dma, 0, pkt->pkt_cmdlen,
9926             DDI_DMA_SYNC_FORDEV);
9927 
9928         HBASTATS.CtCmdIssued++;
9929 
9930         EMLXS_SLI_ISSUE_IOCB_CMD(hba, cp, iocbq);
9931 
9932         return (FC_SUCCESS);
9933 
9934 } /* emlxs_send_menlo() */
9935 #endif /* MENLO_SUPPORT */
9936 
9937 
9938 static int32_t
9939 emlxs_send_ct(emlxs_port_t *port, emlxs_buf_t *sbp)
9940 {
9941         emlxs_hba_t     *hba = HBA;
9942         fc_packet_t     *pkt;
9943         IOCBQ           *iocbq;
9944         IOCB            *iocb;
9945         NODELIST        *ndlp;
9946         uint32_t        did;
9947         CHANNEL         *cp;
9948         int32_t         rval;
9949 
9950         pkt = PRIV2PKT(sbp);
9951         did = LE_SWAP24_LO(pkt->pkt_cmd_fhdr.d_id);
9952 
9953         iocbq = &sbp->iocbq;
9954         iocb = &iocbq->iocb;
9955 
9956         ndlp = emlxs_node_find_did(port, did, 1);
9957 
9958         if (!ndlp || !ndlp->nlp_active) {
9959                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_trans_failed_msg,
9960                     "Node not found. did=0x%x", did);
9961 
9962                 return (FC_BADPACKET);
9963         }
9964 
9965 #if (EMLXS_MODREVX == EMLXS_MODREV2X)
9966         emlxs_swap_ct_pkt(sbp);
9967 #endif  /* EMLXS_MODREV2X */
9968 
9969         iocbq->node = (void *)ndlp;
9970         if ((rval = EMLXS_SLI_PREP_CT_IOCB(port, sbp)) != FC_SUCCESS) {
9971 
9972                 if (rval == 0xff) {
9973                         emlxs_pkt_complete(sbp, IOSTAT_LOCAL_REJECT, 0, 1);
9974                         rval = FC_SUCCESS;
9975                 }
9976 
9977                 return (rval);
9978         }
9979 
9980         cp = &hba->chan[hba->channel_ct];
9981         cp->ulpSendCmd++;
9982 
9983         /* Initalize sbp */
9984         mutex_enter(&sbp->mtx);
9985         sbp->ticks = hba->timer_tics + pkt->pkt_timeout +
9986             ((pkt->pkt_timeout > 0xff) ? 0 : 10);
9987         sbp->node = (void *)ndlp;
9988         sbp->lun = EMLXS_LUN_NONE;
9989         sbp->class = iocb->ULPCLASS;
9990         sbp->did = did;
9991         mutex_exit(&sbp->mtx);
9992 
9993         if (did == NAMESERVER_DID) {
9994                 SLI_CT_REQUEST  *CtCmd;
9995                 uint32_t        *lp0;
9996 
9997                 CtCmd = (SLI_CT_REQUEST *)pkt->pkt_cmd;
9998                 lp0 = (uint32_t *)pkt->pkt_cmd;
9999 
10000                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_ct_send_msg,
10001                     "%s: did=%x [%08x,%08x]",
10002                     emlxs_ctcmd_xlate(
10003                     LE_SWAP16(CtCmd->CommandResponse.bits.CmdRsp)),
10004                     did, LE_SWAP32(lp0[4]), LE_SWAP32(lp0[5]));
10005 
10006                 if (hba->flag & FC_NPIV_DELAY_REQUIRED) {
10007                         sbp->pkt_flags |= PACKET_DELAY_REQUIRED;
10008                 }
10009 
10010         } else if (did == FDMI_DID) {
10011                 SLI_CT_REQUEST  *CtCmd;
10012                 uint32_t        *lp0;
10013 
10014                 CtCmd = (SLI_CT_REQUEST *)pkt->pkt_cmd;
10015                 lp0 = (uint32_t *)pkt->pkt_cmd;
10016 
10017                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_ct_send_msg,
10018                     "%s: did=%x [%08x,%08x]",
10019                     emlxs_mscmd_xlate(
10020                     LE_SWAP16(CtCmd->CommandResponse.bits.CmdRsp)),
10021                     did, LE_SWAP32(lp0[4]), LE_SWAP32(lp0[5]));
10022         } else {
10023                 SLI_CT_REQUEST  *CtCmd;
10024                 uint32_t        *lp0;
10025 
10026                 CtCmd = (SLI_CT_REQUEST *)pkt->pkt_cmd;
10027                 lp0 = (uint32_t *)pkt->pkt_cmd;
10028 
10029                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_ct_send_msg,
10030                     "%s: did=%x [%08x,%08x]",
10031                     emlxs_rmcmd_xlate(
10032                     LE_SWAP16(CtCmd->CommandResponse.bits.CmdRsp)),
10033                     did, LE_SWAP32(lp0[4]), LE_SWAP32(lp0[5]));
10034         }
10035 
10036         if (pkt->pkt_cmdlen) {
10037                 EMLXS_MPDATA_SYNC(pkt->pkt_cmd_dma, 0, pkt->pkt_cmdlen,
10038                     DDI_DMA_SYNC_FORDEV);
10039         }
10040 
10041         HBASTATS.CtCmdIssued++;
10042 
10043         EMLXS_SLI_ISSUE_IOCB_CMD(hba, cp, iocbq);
10044 
10045         return (FC_SUCCESS);
10046 
10047 } /* emlxs_send_ct() */
10048 
10049 
10050 static int32_t
10051 emlxs_send_ct_rsp(emlxs_port_t *port, emlxs_buf_t *sbp)
10052 {
10053         emlxs_hba_t     *hba = HBA;
10054         fc_packet_t     *pkt;
10055         CHANNEL         *cp;
10056         IOCBQ           *iocbq;
10057         IOCB            *iocb;
10058         uint32_t        *cmd;
10059         SLI_CT_REQUEST  *CtCmd;
10060         int32_t         rval;
10061 
10062         pkt = PRIV2PKT(sbp);
10063         CtCmd = (SLI_CT_REQUEST *)pkt->pkt_cmd;
10064         cmd = (uint32_t *)pkt->pkt_cmd;
10065 
10066         iocbq = &sbp->iocbq;
10067         iocb = &iocbq->iocb;
10068 
10069 #if (EMLXS_MODREVX == EMLXS_MODREV2X)
10070         emlxs_swap_ct_pkt(sbp);
10071 #endif  /* EMLXS_MODREV2X */
10072 
10073         if ((rval = EMLXS_SLI_PREP_CT_IOCB(port, sbp)) != FC_SUCCESS) {
10074 
10075                 if (rval == 0xff) {
10076                         emlxs_pkt_complete(sbp, IOSTAT_LOCAL_REJECT, 0, 1);
10077                         rval = FC_SUCCESS;
10078                 }
10079 
10080                 return (rval);
10081         }
10082 
10083         cp = &hba->chan[hba->channel_ct];
10084         cp->ulpSendCmd++;
10085 
10086         /* Initalize sbp */
10087         mutex_enter(&sbp->mtx);
10088         sbp->ticks = hba->timer_tics + pkt->pkt_timeout +
10089             ((pkt->pkt_timeout > 0xff) ? 0 : 10);
10090         sbp->node = NULL;
10091         sbp->lun = EMLXS_LUN_NONE;
10092         sbp->class = iocb->ULPCLASS;
10093         mutex_exit(&sbp->mtx);
10094 
10095         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_ct_reply_msg,
10096             "%s: Rsn=%x Exp=%x [%08x,%08x] rxid=%x ",
10097             emlxs_rmcmd_xlate(LE_SWAP16(
10098             CtCmd->CommandResponse.bits.CmdRsp)),
10099             CtCmd->ReasonCode, CtCmd->Explanation,
10100             LE_SWAP32(cmd[4]), LE_SWAP32(cmd[5]),
10101             pkt->pkt_cmd_fhdr.rx_id);
10102 
10103         if (pkt->pkt_cmdlen) {
10104                 EMLXS_MPDATA_SYNC(pkt->pkt_cmd_dma, 0, pkt->pkt_cmdlen,
10105                     DDI_DMA_SYNC_FORDEV);
10106         }
10107 
10108         HBASTATS.CtRspIssued++;
10109 
10110         EMLXS_SLI_ISSUE_IOCB_CMD(hba, cp, iocbq);
10111 
10112         return (FC_SUCCESS);
10113 
10114 } /* emlxs_send_ct_rsp() */
10115 
10116 
10117 /*
10118  * emlxs_get_instance()
10119  * Given a ddi ddiinst, return a Fibre Channel (emlx) ddiinst.
10120  */
10121 extern uint32_t
10122 emlxs_get_instance(int32_t ddiinst)
10123 {
10124         uint32_t i;
10125         uint32_t inst;
10126 
10127         mutex_enter(&emlxs_device.lock);
10128 
10129         inst = MAX_FC_BRDS;
10130         for (i = 0; i < emlxs_instance_count; i++) {
10131                 if (emlxs_instance[i] == ddiinst) {
10132                         inst = i;
10133                         break;
10134                 }
10135         }
10136 
10137         mutex_exit(&emlxs_device.lock);
10138 
10139         return (inst);
10140 
10141 } /* emlxs_get_instance() */
10142 
10143 
10144 /*
10145  * emlxs_add_instance()
10146  * Given a ddi ddiinst, create a Fibre Channel (emlx) ddiinst.
10147  * emlx ddiinsts are the order that emlxs_attach gets called, starting at 0.
10148  */
10149 static uint32_t
10150 emlxs_add_instance(int32_t ddiinst)
10151 {
10152         uint32_t i;
10153 
10154         mutex_enter(&emlxs_device.lock);
10155 
10156         /* First see if the ddiinst already exists */
10157         for (i = 0; i < emlxs_instance_count; i++) {
10158                 if (emlxs_instance[i] == ddiinst) {
10159                         break;
10160                 }
10161         }
10162 
10163         /* If it doesn't already exist, add it */
10164         if (i >= emlxs_instance_count) {
10165                 if ((i = emlxs_instance_count) < MAX_FC_BRDS) {
10166                         emlxs_instance[i] = ddiinst;
10167                         emlxs_instance_count++;
10168                         emlxs_device.hba_count = emlxs_instance_count;
10169                 }
10170         }
10171 
10172         mutex_exit(&emlxs_device.lock);
10173 
10174         return (i);
10175 
10176 } /* emlxs_add_instance() */
10177 
10178 
10179 /*ARGSUSED*/
10180 extern void
10181 emlxs_pkt_complete(emlxs_buf_t *sbp, uint32_t iostat, uint8_t localstat,
10182     uint32_t doneq)
10183 {
10184         emlxs_hba_t     *hba;
10185         emlxs_port_t    *port;
10186         emlxs_buf_t     *fpkt;
10187 
10188         port = sbp->port;
10189 
10190         if (!port) {
10191                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_pkt_completion_error_msg,
10192                     "NULL port found. sbp=%p flags=%x", sbp, sbp->pkt_flags);
10193 
10194                 return;
10195         }
10196 
10197         hba = HBA;
10198 
10199         if ((hba->sli_mode == EMLXS_HBA_SLI4_MODE) &&
10200             (sbp->iotag)) {
10201                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sli_debug_msg,
10202                     "WARNING: Completing IO with iotag. sbp=%p iotag=%d "
10203                     "xri_flags=%x",
10204                     sbp, sbp->iotag, ((sbp->xrip)? sbp->xrip->flag:0));
10205 
10206                 emlxs_sli4_free_xri(port, sbp, sbp->xrip, 1);
10207         }
10208 
10209         mutex_enter(&sbp->mtx);
10210 
10211         /* Check for error conditions */
10212         if (sbp->pkt_flags & (PACKET_ULP_OWNED | PACKET_COMPLETED |
10213             PACKET_IN_DONEQ | PACKET_IN_COMPLETION |
10214             PACKET_IN_TXQ | PACKET_IN_CHIPQ)) {
10215                 if (sbp->pkt_flags & PACKET_ULP_OWNED) {
10216                         EMLXS_MSGF(EMLXS_CONTEXT,
10217                             &emlxs_pkt_completion_error_msg,
10218                             "Packet already returned. sbp=%p flags=%x", sbp,
10219                             sbp->pkt_flags);
10220                 }
10221 
10222                 else if (sbp->pkt_flags & PACKET_COMPLETED) {
10223                         EMLXS_MSGF(EMLXS_CONTEXT,
10224                             &emlxs_pkt_completion_error_msg,
10225                             "Packet already completed. sbp=%p flags=%x", sbp,
10226                             sbp->pkt_flags);
10227                 }
10228 
10229                 else if (sbp->pkt_flags & PACKET_IN_DONEQ) {
10230                         EMLXS_MSGF(EMLXS_CONTEXT,
10231                             &emlxs_pkt_completion_error_msg,
10232                             "Pkt already on done queue. sbp=%p flags=%x", sbp,
10233                             sbp->pkt_flags);
10234                 }
10235 
10236                 else if (sbp->pkt_flags & PACKET_IN_COMPLETION) {
10237                         EMLXS_MSGF(EMLXS_CONTEXT,
10238                             &emlxs_pkt_completion_error_msg,
10239                             "Packet already in completion. sbp=%p flags=%x",
10240                             sbp, sbp->pkt_flags);
10241                 }
10242 
10243                 else if (sbp->pkt_flags & PACKET_IN_CHIPQ) {
10244                         EMLXS_MSGF(EMLXS_CONTEXT,
10245                             &emlxs_pkt_completion_error_msg,
10246                             "Packet still on chip queue. sbp=%p flags=%x",
10247                             sbp, sbp->pkt_flags);
10248                 }
10249 
10250                 else if (sbp->pkt_flags & PACKET_IN_TXQ) {
10251                         EMLXS_MSGF(EMLXS_CONTEXT,
10252                             &emlxs_pkt_completion_error_msg,
10253                             "Packet still on tx queue. sbp=%p flags=%x", sbp,
10254                             sbp->pkt_flags);
10255                 }
10256 
10257                 mutex_exit(&sbp->mtx);
10258                 return;
10259         }
10260 
10261         /* Packet is now in completion */
10262         sbp->pkt_flags |= PACKET_IN_COMPLETION;
10263 
10264         /* Set the state if not already set */
10265         if (!(sbp->pkt_flags & PACKET_STATE_VALID)) {
10266                 emlxs_set_pkt_state(sbp, iostat, localstat, 0);
10267         }
10268 
10269         /* Check for parent flush packet */
10270         /* If pkt has a parent flush packet then adjust its count now */
10271         fpkt = sbp->fpkt;
10272         if (fpkt) {
10273                 /*
10274                  * We will try to NULL sbp->fpkt inside the
10275                  * fpkt's mutex if possible
10276                  */
10277 
10278                 if (!(fpkt->pkt_flags & PACKET_ULP_OWNED)) {
10279                         mutex_enter(&fpkt->mtx);
10280                         if (fpkt->flush_count) {
10281                                 fpkt->flush_count--;
10282                         }
10283                         sbp->fpkt = NULL;
10284                         mutex_exit(&fpkt->mtx);
10285                 } else {        /* fpkt has been returned already */
10286 
10287                         sbp->fpkt = NULL;
10288                 }
10289         }
10290 
10291         /* If pkt is polled, then wake up sleeping thread */
10292         if (sbp->pkt_flags & PACKET_POLLED) {
10293                 /* Don't set the PACKET_ULP_OWNED flag here */
10294                 /* because the polling thread will do it */
10295                 sbp->pkt_flags |= PACKET_COMPLETED;
10296                 mutex_exit(&sbp->mtx);
10297 
10298                 /* Wake up sleeping thread */
10299                 mutex_enter(&EMLXS_PKT_LOCK);
10300                 cv_broadcast(&EMLXS_PKT_CV);
10301                 mutex_exit(&EMLXS_PKT_LOCK);
10302         }
10303 
10304         /* If packet was generated by our driver, */
10305         /* then complete it immediately */
10306         else if (sbp->pkt_flags & PACKET_ALLOCATED) {
10307                 mutex_exit(&sbp->mtx);
10308 
10309                 emlxs_iodone(sbp);
10310         }
10311 
10312         /* Put the pkt on the done queue for callback */
10313         /* completion in another thread */
10314         else {
10315                 sbp->pkt_flags |= PACKET_IN_DONEQ;
10316                 sbp->next = NULL;
10317                 mutex_exit(&sbp->mtx);
10318 
10319                 /* Put pkt on doneq, so I/O's will be completed in order */
10320                 mutex_enter(&EMLXS_PORT_LOCK);
10321                 if (hba->iodone_tail == NULL) {
10322                         hba->iodone_list = sbp;
10323                         hba->iodone_count = 1;
10324                 } else {
10325                         hba->iodone_tail->next = sbp;
10326                         hba->iodone_count++;
10327                 }
10328                 hba->iodone_tail = sbp;
10329                 mutex_exit(&EMLXS_PORT_LOCK);
10330 
10331                 /* Trigger a thread to service the doneq */
10332                 emlxs_thread_trigger1(&hba->iodone_thread,
10333                     emlxs_iodone_server);
10334         }
10335 
10336         return;
10337 
10338 } /* emlxs_pkt_complete() */
10339 
10340 
10341 #ifdef SAN_DIAG_SUPPORT
10342 /*
10343  * This routine is called with EMLXS_PORT_LOCK held so we can just increment
10344  * normally. Don't have to use atomic operations.
10345  */
10346 extern void
10347 emlxs_update_sd_bucket(emlxs_buf_t *sbp)
10348 {
10349         emlxs_port_t    *vport;
10350         fc_packet_t     *pkt;
10351         uint32_t        did;
10352         hrtime_t        t;
10353         hrtime_t        delta_time;
10354         int             i;
10355         NODELIST        *ndlp;
10356 
10357         vport = sbp->port;
10358 
10359         if ((emlxs_sd_bucket.search_type == 0) ||
10360             (vport->sd_io_latency_state != SD_COLLECTING)) {
10361                 return;
10362         }
10363 
10364         /* Compute the iolatency time in microseconds */
10365         t = gethrtime();
10366         delta_time = t - sbp->sd_start_time;
10367         pkt = PRIV2PKT(sbp);
10368         did = LE_SWAP24_LO(pkt->pkt_cmd_fhdr.d_id);
10369         ndlp = emlxs_node_find_did(vport, did, 1);
10370 
10371         if (!ndlp) {
10372                 return;
10373         }
10374 
10375         if (delta_time >=
10376             emlxs_sd_bucket.values[SD_IO_LATENCY_MAX_BUCKETS - 1]) {
10377                 ndlp->sd_dev_bucket[SD_IO_LATENCY_MAX_BUCKETS - 1].
10378                     count++;
10379         } else if (delta_time <= emlxs_sd_bucket.values[0]) {
10380                 ndlp->sd_dev_bucket[0].count++;
10381         } else {
10382                 for (i = 1; i < SD_IO_LATENCY_MAX_BUCKETS; i++) {
10383                         if ((delta_time > emlxs_sd_bucket.values[i-1]) &&
10384                             (delta_time <= emlxs_sd_bucket.values[i])) {
10385                                 ndlp->sd_dev_bucket[i].count++;
10386                                 break;
10387                         }
10388                 }
10389         }
10390 
10391         return;
10392 
10393 } /* emlxs_update_sd_bucket() */
10394 #endif /* SAN_DIAG_SUPPORT */
10395 
10396 /*ARGSUSED*/
10397 static void
10398 emlxs_iodone_server(void *arg1, void *arg2, void *arg3)
10399 {
10400         emlxs_hba_t *hba = (emlxs_hba_t *)arg1;
10401         emlxs_buf_t *sbp;
10402 
10403         mutex_enter(&EMLXS_PORT_LOCK);
10404 
10405         /* Remove one pkt from the doneq head and complete it */
10406         while ((sbp = hba->iodone_list) != NULL) {
10407                 if ((hba->iodone_list = sbp->next) == NULL) {
10408                         hba->iodone_tail = NULL;
10409                         hba->iodone_count = 0;
10410                 } else {
10411                         hba->iodone_count--;
10412                 }
10413 
10414                 mutex_exit(&EMLXS_PORT_LOCK);
10415 
10416                 /* Prepare the pkt for completion */
10417                 mutex_enter(&sbp->mtx);
10418                 sbp->next = NULL;
10419                 sbp->pkt_flags &= ~PACKET_IN_DONEQ;
10420                 mutex_exit(&sbp->mtx);
10421 
10422                 /* Complete the IO now */
10423                 emlxs_iodone(sbp);
10424 
10425                 /* Reacquire lock and check if more work is to be done */
10426                 mutex_enter(&EMLXS_PORT_LOCK);
10427         }
10428 
10429         mutex_exit(&EMLXS_PORT_LOCK);
10430 
10431 #ifdef FMA_SUPPORT
10432         if (hba->flag & FC_DMA_CHECK_ERROR) {
10433                 emlxs_thread_spawn(hba, emlxs_restart_thread,
10434                     NULL, NULL);
10435         }
10436 #endif /* FMA_SUPPORT */
10437 
10438         return;
10439 
10440 } /* End emlxs_iodone_server */
10441 
10442 
10443 static void
10444 emlxs_iodone(emlxs_buf_t *sbp)
10445 {
10446 #ifdef FMA_SUPPORT
10447         emlxs_port_t    *port = sbp->port;
10448         emlxs_hba_t     *hba = port->hba;
10449 #endif  /* FMA_SUPPORT */
10450 
10451         fc_packet_t     *pkt;
10452         CHANNEL         *cp;
10453 
10454         pkt = PRIV2PKT(sbp);
10455 
10456         /* Check one more time that the  pkt has not already been returned */
10457         if (sbp->pkt_flags & PACKET_ULP_OWNED) {
10458                 return;
10459         }
10460 
10461 #if (EMLXS_MODREVX == EMLXS_MODREV2X)
10462         emlxs_unswap_pkt(sbp);
10463 #endif  /* EMLXS_MODREV2X */
10464 
10465         mutex_enter(&sbp->mtx);
10466         sbp->pkt_flags |= (PACKET_COMPLETED | PACKET_ULP_OWNED);
10467         mutex_exit(&sbp->mtx);
10468 
10469         if (pkt->pkt_comp) {
10470 #ifdef FMA_SUPPORT
10471                 emlxs_check_dma(hba, sbp);
10472 #endif  /* FMA_SUPPORT */
10473 
10474                 if (sbp->channel) {
10475                         cp = (CHANNEL *)sbp->channel;
10476                         cp->ulpCmplCmd++;
10477                 }
10478 
10479                 (*pkt->pkt_comp) (pkt);
10480         }
10481 
10482         return;
10483 
10484 } /* emlxs_iodone() */
10485 
10486 
10487 
10488 extern fc_unsol_buf_t *
10489 emlxs_ub_find(emlxs_port_t *port, uint32_t token)
10490 {
10491         emlxs_unsol_buf_t       *pool;
10492         fc_unsol_buf_t          *ubp;
10493         emlxs_ub_priv_t         *ub_priv;
10494 
10495         /* Check if this is a valid ub token */
10496         if (token < EMLXS_UB_TOKEN_OFFSET) {
10497                 return (NULL);
10498         }
10499 
10500         mutex_enter(&EMLXS_UB_LOCK);
10501 
10502         pool = port->ub_pool;
10503         while (pool) {
10504                 /* Find a pool with the proper token range */
10505                 if (token >= pool->pool_first_token &&
10506                     token <= pool->pool_last_token) {
10507                         ubp = (fc_unsol_buf_t *)&pool->fc_ubufs[(token -
10508                             pool->pool_first_token)];
10509                         ub_priv = ubp->ub_fca_private;
10510 
10511                         if (ub_priv->token != token) {
10512                                 EMLXS_MSGF(EMLXS_CONTEXT,
10513                                     &emlxs_sfs_debug_msg,
10514                                     "ub_find: Invalid token=%x", ubp, token,
10515                                     ub_priv->token);
10516 
10517                                 ubp = NULL;
10518                         }
10519 
10520                         else if (!(ub_priv->flags & EMLXS_UB_IN_USE)) {
10521                                 EMLXS_MSGF(EMLXS_CONTEXT,
10522                                     &emlxs_sfs_debug_msg,
10523                                     "ub_find: Buffer not in use. buffer=%p "
10524                                     "token=%x", ubp, token);
10525 
10526                                 ubp = NULL;
10527                         }
10528 
10529                         mutex_exit(&EMLXS_UB_LOCK);
10530 
10531                         return (ubp);
10532                 }
10533 
10534                 pool = pool->pool_next;
10535         }
10536 
10537         mutex_exit(&EMLXS_UB_LOCK);
10538 
10539         return (NULL);
10540 
10541 } /* emlxs_ub_find() */
10542 
10543 
10544 
10545 extern fc_unsol_buf_t *
10546 emlxs_ub_get(emlxs_port_t *port, uint32_t size, uint32_t type,
10547     uint32_t reserve)
10548 {
10549         emlxs_hba_t             *hba = HBA;
10550         emlxs_unsol_buf_t       *pool;
10551         fc_unsol_buf_t          *ubp;
10552         emlxs_ub_priv_t         *ub_priv;
10553         uint32_t                i;
10554         uint32_t                resv_flag;
10555         uint32_t                pool_free;
10556         uint32_t                pool_free_resv;
10557 
10558         mutex_enter(&EMLXS_UB_LOCK);
10559 
10560         pool = port->ub_pool;
10561         while (pool) {
10562                 /* Find a pool of the appropriate type and size */
10563                 if ((pool->pool_available == 0) ||
10564                     (pool->pool_type != type) ||
10565                     (pool->pool_buf_size < size)) {
10566                         goto next_pool;
10567                 }
10568 
10569 
10570                 /* Adjust free counts based on availablity    */
10571                 /* The free reserve count gets first priority */
10572                 pool_free_resv =
10573                     min(pool->pool_free_resv, pool->pool_available);
10574                 pool_free =
10575                     min(pool->pool_free,
10576                     (pool->pool_available - pool_free_resv));
10577 
10578                 /* Initialize reserve flag */
10579                 resv_flag = reserve;
10580 
10581                 if (resv_flag) {
10582                         if (pool_free_resv == 0) {
10583                                 if (pool_free == 0) {
10584                                         goto next_pool;
10585                                 }
10586                                 resv_flag = 0;
10587                         }
10588                 } else if (pool_free == 0) {
10589                         goto next_pool;
10590                 }
10591 
10592                 /* Find next available free buffer in this pool */
10593                 for (i = 0; i < pool->pool_nentries; i++) {
10594                         ubp = (fc_unsol_buf_t *)&pool->fc_ubufs[i];
10595                         ub_priv = ubp->ub_fca_private;
10596 
10597                         if (!ub_priv->available ||
10598                             ub_priv->flags != EMLXS_UB_FREE) {
10599                                 continue;
10600                         }
10601 
10602                         ub_priv->time = hba->timer_tics;
10603 
10604                         /* Timeout in 5 minutes */
10605                         ub_priv->timeout = (5 * 60);
10606 
10607                         ub_priv->flags = EMLXS_UB_IN_USE;
10608 
10609                         /* Alloc the buffer from the pool */
10610                         if (resv_flag) {
10611                                 ub_priv->flags |= EMLXS_UB_RESV;
10612                                 pool->pool_free_resv--;
10613                         } else {
10614                                 pool->pool_free--;
10615                         }
10616 
10617                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_detail_msg,
10618                             "ub_get: ubp=%p token=%x (%d,%d,%d,%d)", ubp,
10619                             ub_priv->token, pool->pool_nentries,
10620                             pool->pool_available, pool->pool_free,
10621                             pool->pool_free_resv);
10622 
10623                         mutex_exit(&EMLXS_UB_LOCK);
10624 
10625                         return (ubp);
10626                 }
10627 next_pool:
10628 
10629                 pool = pool->pool_next;
10630         }
10631 
10632         mutex_exit(&EMLXS_UB_LOCK);
10633 
10634         return (NULL);
10635 
10636 } /* emlxs_ub_get() */
10637 
10638 
10639 
10640 extern void
10641 emlxs_set_pkt_state(emlxs_buf_t *sbp, uint32_t iostat, uint8_t localstat,
10642     uint32_t lock)
10643 {
10644         fc_packet_t             *pkt;
10645         fcp_rsp_t               *fcp_rsp;
10646         uint32_t                i;
10647         emlxs_xlat_err_t        *tptr;
10648         emlxs_xlat_err_t        *entry;
10649 
10650 
10651         pkt = PRIV2PKT(sbp);
10652 
10653         /* Warning: Some FCT sbp's don't have */
10654         /* fc_packet objects, so just return  */
10655         if (!pkt) {
10656                 return;
10657         }
10658 
10659         if (lock) {
10660                 mutex_enter(&sbp->mtx);
10661         }
10662 
10663         if (!(sbp->pkt_flags & PACKET_STATE_VALID)) {
10664                 sbp->pkt_flags |= PACKET_STATE_VALID;
10665 
10666                 /* Perform table lookup */
10667                 entry = NULL;
10668                 if (iostat != IOSTAT_LOCAL_REJECT) {
10669                         tptr = emlxs_iostat_tbl;
10670                         for (i = 0; i < IOSTAT_MAX; i++, tptr++) {
10671                                 if (iostat == tptr->emlxs_status) {
10672                                         entry = tptr;
10673                                         break;
10674                 }
10675                         }
10676                 } else {        /* iostate == IOSTAT_LOCAL_REJECT */
10677 
10678                         tptr = emlxs_ioerr_tbl;
10679                         for (i = 0; i < IOERR_MAX; i++, tptr++) {
10680                                 if (localstat == tptr->emlxs_status) {
10681                                         entry = tptr;
10682                                         break;
10683                 }
10684                         }
10685                 }
10686 
10687                 if (entry) {
10688                         pkt->pkt_state  = entry->pkt_state;
10689                         pkt->pkt_reason = entry->pkt_reason;
10690                         pkt->pkt_expln  = entry->pkt_expln;
10691                         pkt->pkt_action = entry->pkt_action;
10692                 } else {
10693                         /* Set defaults */
10694                         pkt->pkt_state  = FC_PKT_TRAN_ERROR;
10695                         pkt->pkt_reason = FC_REASON_ABORTED;
10696                         pkt->pkt_expln  = FC_EXPLN_NONE;
10697                         pkt->pkt_action = FC_ACTION_RETRYABLE;
10698                 }
10699 
10700 
10701                 /* Set the residual counts and response frame */
10702                 /* Check if response frame was received from the chip */
10703                 /* If so, then the residual counts will already be set */
10704                 if (!(sbp->pkt_flags & (PACKET_FCP_RSP_VALID |
10705                     PACKET_CT_RSP_VALID | PACKET_ELS_RSP_VALID))) {
10706                         /* We have to create the response frame */
10707                         if (iostat == IOSTAT_SUCCESS) {
10708                                 pkt->pkt_resp_resid = 0;
10709                                 pkt->pkt_data_resid = 0;
10710 
10711                                 if ((pkt->pkt_cmd_fhdr.type ==
10712                                     FC_TYPE_SCSI_FCP) && pkt->pkt_rsplen &&
10713                                     pkt->pkt_resp) {
10714                                         fcp_rsp = (fcp_rsp_t *)pkt->pkt_resp;
10715 
10716                                         fcp_rsp->fcp_u.fcp_status.
10717                                             rsp_len_set = 1;
10718                                         fcp_rsp->fcp_response_len = 8;
10719                                 }
10720                         } else {
10721                                 /* Otherwise assume no data */
10722                                 /* and no response received */
10723                                 pkt->pkt_data_resid = pkt->pkt_datalen;
10724                                 pkt->pkt_resp_resid = pkt->pkt_rsplen;
10725                         }
10726                 }
10727         }
10728 
10729         if (lock) {
10730                 mutex_exit(&sbp->mtx);
10731         }
10732 
10733         return;
10734 
10735 } /* emlxs_set_pkt_state() */
10736 
10737 
10738 #if (EMLXS_MODREVX == EMLXS_MODREV2X)
10739 
10740 extern void
10741 emlxs_swap_service_params(SERV_PARM *sp)
10742 {
10743         uint16_t        *p;
10744         int             size;
10745         int             i;
10746 
10747         size = (sizeof (CSP) - 4) / 2;
10748         p = (uint16_t *)&sp->cmn;
10749         for (i = 0; i < size; i++) {
10750                 p[i] = LE_SWAP16(p[i]);
10751         }
10752         sp->cmn.e_d_tov = LE_SWAP32(sp->cmn.e_d_tov);
10753 
10754         size = sizeof (CLASS_PARMS) / 2;
10755         p = (uint16_t *)&sp->cls1;
10756         for (i = 0; i < size; i++, p++) {
10757                 *p = LE_SWAP16(*p);
10758         }
10759 
10760         size = sizeof (CLASS_PARMS) / 2;
10761         p = (uint16_t *)&sp->cls2;
10762         for (i = 0; i < size; i++, p++) {
10763                 *p = LE_SWAP16(*p);
10764         }
10765 
10766         size = sizeof (CLASS_PARMS) / 2;
10767         p = (uint16_t *)&sp->cls3;
10768         for (i = 0; i < size; i++, p++) {
10769                 *p = LE_SWAP16(*p);
10770         }
10771 
10772         size = sizeof (CLASS_PARMS) / 2;
10773         p = (uint16_t *)&sp->cls4;
10774         for (i = 0; i < size; i++, p++) {
10775                 *p = LE_SWAP16(*p);
10776         }
10777 
10778         return;
10779 
10780 } /* emlxs_swap_service_params() */
10781 
10782 extern void
10783 emlxs_unswap_pkt(emlxs_buf_t *sbp)
10784 {
10785         if (sbp->pkt_flags & PACKET_FCP_SWAPPED) {
10786                 emlxs_swap_fcp_pkt(sbp);
10787         }
10788 
10789         else if (sbp->pkt_flags & PACKET_ELS_SWAPPED) {
10790                 emlxs_swap_els_pkt(sbp);
10791         }
10792 
10793         else if (sbp->pkt_flags & PACKET_CT_SWAPPED) {
10794                 emlxs_swap_ct_pkt(sbp);
10795         }
10796 
10797 } /* emlxs_unswap_pkt() */
10798 
10799 
10800 extern void
10801 emlxs_swap_fcp_pkt(emlxs_buf_t *sbp)
10802 {
10803         fc_packet_t     *pkt;
10804         FCP_CMND        *cmd;
10805         fcp_rsp_t       *rsp;
10806         uint16_t        *lunp;
10807         uint32_t        i;
10808 
10809         mutex_enter(&sbp->mtx);
10810 
10811         if (sbp->pkt_flags & PACKET_ALLOCATED) {
10812                 mutex_exit(&sbp->mtx);
10813                 return;
10814         }
10815 
10816         if (sbp->pkt_flags & PACKET_FCP_SWAPPED) {
10817                 sbp->pkt_flags &= ~PACKET_FCP_SWAPPED;
10818         } else {
10819                 sbp->pkt_flags |= PACKET_FCP_SWAPPED;
10820         }
10821 
10822         mutex_exit(&sbp->mtx);
10823 
10824         pkt = PRIV2PKT(sbp);
10825 
10826         cmd = (FCP_CMND *)pkt->pkt_cmd;
10827         rsp = (pkt->pkt_rsplen &&
10828             (sbp->pkt_flags & PACKET_FCP_RSP_VALID)) ?
10829             (fcp_rsp_t *)pkt->pkt_resp : NULL;
10830 
10831         /* The size of data buffer needs to be swapped. */
10832         cmd->fcpDl = LE_SWAP32(cmd->fcpDl);
10833 
10834         /*
10835          * Swap first 2 words of FCP CMND payload.
10836          */
10837         lunp = (uint16_t *)&cmd->fcpLunMsl;
10838         for (i = 0; i < 4; i++) {
10839                 lunp[i] = LE_SWAP16(lunp[i]);
10840         }
10841 
10842         if (rsp) {
10843                 rsp->fcp_resid = LE_SWAP32(rsp->fcp_resid);
10844                 rsp->fcp_sense_len = LE_SWAP32(rsp->fcp_sense_len);
10845                 rsp->fcp_response_len = LE_SWAP32(rsp->fcp_response_len);
10846         }
10847 
10848         return;
10849 
10850 } /* emlxs_swap_fcp_pkt() */
10851 
10852 
10853 extern void
10854 emlxs_swap_els_pkt(emlxs_buf_t *sbp)
10855 {
10856         fc_packet_t     *pkt;
10857         uint32_t        *cmd;
10858         uint32_t        *rsp;
10859         uint32_t        command;
10860         uint16_t        *c;
10861         uint32_t        i;
10862         uint32_t        swapped;
10863 
10864         mutex_enter(&sbp->mtx);
10865 
10866         if (sbp->pkt_flags & PACKET_ALLOCATED) {
10867                 mutex_exit(&sbp->mtx);
10868                 return;
10869         }
10870 
10871         if (sbp->pkt_flags & PACKET_ELS_SWAPPED) {
10872                 sbp->pkt_flags &= ~PACKET_ELS_SWAPPED;
10873                 swapped = 1;
10874         } else {
10875                 sbp->pkt_flags |= PACKET_ELS_SWAPPED;
10876                 swapped = 0;
10877         }
10878 
10879         mutex_exit(&sbp->mtx);
10880 
10881         pkt = PRIV2PKT(sbp);
10882 
10883         cmd = (uint32_t *)pkt->pkt_cmd;
10884         rsp = (pkt->pkt_rsplen &&
10885             (sbp->pkt_flags & PACKET_ELS_RSP_VALID)) ?
10886             (uint32_t *)pkt->pkt_resp : NULL;
10887 
10888         if (!swapped) {
10889                 cmd[0] = LE_SWAP32(cmd[0]);
10890                 command = cmd[0] & ELS_CMD_MASK;
10891         } else {
10892                 command = cmd[0] & ELS_CMD_MASK;
10893                 cmd[0] = LE_SWAP32(cmd[0]);
10894         }
10895 
10896         if (rsp) {
10897                 rsp[0] = LE_SWAP32(rsp[0]);
10898         }
10899 
10900         switch (command) {
10901         case ELS_CMD_ACC:
10902                 if (sbp->ucmd == ELS_CMD_ADISC) {
10903                         /* Hard address of originator */
10904                         cmd[1] = LE_SWAP32(cmd[1]);
10905 
10906                         /* N_Port ID of originator */
10907                         cmd[6] = LE_SWAP32(cmd[6]);
10908                 }
10909                 break;
10910 
10911         case ELS_CMD_PLOGI:
10912         case ELS_CMD_FLOGI:
10913         case ELS_CMD_FDISC:
10914                 if (rsp) {
10915                         emlxs_swap_service_params((SERV_PARM *) & rsp[1]);
10916                 }
10917                 break;
10918 
10919         case ELS_CMD_LOGO:
10920                 cmd[1] = LE_SWAP32(cmd[1]);     /* N_Port ID */
10921                 break;
10922 
10923         case ELS_CMD_RLS:
10924                 cmd[1] = LE_SWAP32(cmd[1]);
10925 
10926                 if (rsp) {
10927                         for (i = 0; i < 6; i++) {
10928                                 rsp[1 + i] = LE_SWAP32(rsp[1 + i]);
10929                         }
10930                 }
10931                 break;
10932 
10933         case ELS_CMD_ADISC:
10934                 cmd[1] = LE_SWAP32(cmd[1]);     /* Hard address of originator */
10935                 cmd[6] = LE_SWAP32(cmd[6]);     /* N_Port ID of originator */
10936                 break;
10937 
10938         case ELS_CMD_PRLI:
10939                 c = (uint16_t *)&cmd[1];
10940                 c[1] = LE_SWAP16(c[1]);
10941 
10942                 cmd[4] = LE_SWAP32(cmd[4]);
10943 
10944                 if (rsp) {
10945                         rsp[4] = LE_SWAP32(rsp[4]);
10946                 }
10947                 break;
10948 
10949         case ELS_CMD_SCR:
10950                 cmd[1] = LE_SWAP32(cmd[1]);
10951                 break;
10952 
10953         case ELS_CMD_LINIT:
10954                 if (rsp) {
10955                         rsp[1] = LE_SWAP32(rsp[1]);
10956                 }
10957                 break;
10958 
10959         default:
10960                 break;
10961         }
10962 
10963         return;
10964 
10965 } /* emlxs_swap_els_pkt() */
10966 
10967 
10968 extern void
10969 emlxs_swap_ct_pkt(emlxs_buf_t *sbp)
10970 {
10971         fc_packet_t     *pkt;
10972         uint32_t        *cmd;
10973         uint32_t        *rsp;
10974         uint32_t        command;
10975         uint32_t        i;
10976         uint32_t        swapped;
10977 
10978         mutex_enter(&sbp->mtx);
10979 
10980         if (sbp->pkt_flags & PACKET_ALLOCATED) {
10981                 mutex_exit(&sbp->mtx);
10982                 return;
10983         }
10984 
10985         if (sbp->pkt_flags & PACKET_CT_SWAPPED) {
10986                 sbp->pkt_flags &= ~PACKET_CT_SWAPPED;
10987                 swapped = 1;
10988         } else {
10989                 sbp->pkt_flags |= PACKET_CT_SWAPPED;
10990                 swapped = 0;
10991         }
10992 
10993         mutex_exit(&sbp->mtx);
10994 
10995         pkt = PRIV2PKT(sbp);
10996 
10997         cmd = (uint32_t *)pkt->pkt_cmd;
10998         rsp = (pkt->pkt_rsplen &&
10999             (sbp->pkt_flags & PACKET_CT_RSP_VALID)) ?
11000             (uint32_t *)pkt->pkt_resp : NULL;
11001 
11002         if (!swapped) {
11003                 cmd[0] = 0x01000000;
11004                 command = cmd[2];
11005         }
11006 
11007         cmd[0] = LE_SWAP32(cmd[0]);
11008         cmd[1] = LE_SWAP32(cmd[1]);
11009         cmd[2] = LE_SWAP32(cmd[2]);
11010         cmd[3] = LE_SWAP32(cmd[3]);
11011 
11012         if (swapped) {
11013                 command = cmd[2];
11014         }
11015 
11016         switch ((command >> 16)) {
11017         case SLI_CTNS_GA_NXT:
11018                 cmd[4] = LE_SWAP32(cmd[4]);
11019                 break;
11020 
11021         case SLI_CTNS_GPN_ID:
11022         case SLI_CTNS_GNN_ID:
11023         case SLI_CTNS_RPN_ID:
11024         case SLI_CTNS_RNN_ID:
11025         case SLI_CTNS_RSPN_ID:
11026                 cmd[4] = LE_SWAP32(cmd[4]);
11027                 break;
11028 
11029         case SLI_CTNS_RCS_ID:
11030         case SLI_CTNS_RPT_ID:
11031                 cmd[4] = LE_SWAP32(cmd[4]);
11032                 cmd[5] = LE_SWAP32(cmd[5]);
11033                 break;
11034 
11035         case SLI_CTNS_RFT_ID:
11036                 cmd[4] = LE_SWAP32(cmd[4]);
11037 
11038                 /* Swap FC4 types */
11039                 for (i = 0; i < 8; i++) {
11040                         cmd[5 + i] = LE_SWAP32(cmd[5 + i]);
11041                 }
11042                 break;
11043 
11044         case SLI_CTNS_GFT_ID:
11045                 if (rsp) {
11046                         /* Swap FC4 types */
11047                         for (i = 0; i < 8; i++) {
11048                                 rsp[4 + i] = LE_SWAP32(rsp[4 + i]);
11049                         }
11050                 }
11051                 break;
11052 
11053         case SLI_CTNS_GCS_ID:
11054         case SLI_CTNS_GSPN_ID:
11055         case SLI_CTNS_GSNN_NN:
11056         case SLI_CTNS_GIP_NN:
11057         case SLI_CTNS_GIPA_NN:
11058 
11059         case SLI_CTNS_GPT_ID:
11060         case SLI_CTNS_GID_NN:
11061         case SLI_CTNS_GNN_IP:
11062         case SLI_CTNS_GIPA_IP:
11063         case SLI_CTNS_GID_FT:
11064         case SLI_CTNS_GID_PT:
11065         case SLI_CTNS_GID_PN:
11066         case SLI_CTNS_RIP_NN:
11067         case SLI_CTNS_RIPA_NN:
11068         case SLI_CTNS_RSNN_NN:
11069         case SLI_CTNS_DA_ID:
11070         case SLI_CT_RESPONSE_FS_RJT:
11071         case SLI_CT_RESPONSE_FS_ACC:
11072 
11073         default:
11074                 break;
11075         }
11076         return;
11077 
11078 } /* emlxs_swap_ct_pkt() */
11079 
11080 
11081 extern void
11082 emlxs_swap_els_ub(fc_unsol_buf_t *ubp)
11083 {
11084         emlxs_ub_priv_t *ub_priv;
11085         fc_rscn_t       *rscn;
11086         uint32_t        count;
11087         uint32_t        i;
11088         uint32_t        *lp;
11089         la_els_logi_t   *logi;
11090 
11091         ub_priv = ubp->ub_fca_private;
11092 
11093         switch (ub_priv->cmd) {
11094         case ELS_CMD_RSCN:
11095                 rscn = (fc_rscn_t *)ubp->ub_buffer;
11096 
11097                 rscn->rscn_payload_len = LE_SWAP16(rscn->rscn_payload_len);
11098 
11099                 count = ((rscn->rscn_payload_len - 4) / 4);
11100                 lp = (uint32_t *)ubp->ub_buffer + 1;
11101                 for (i = 0; i < count; i++, lp++) {
11102                         *lp = LE_SWAP32(*lp);
11103                 }
11104 
11105                 break;
11106 
11107         case ELS_CMD_FLOGI:
11108         case ELS_CMD_PLOGI:
11109         case ELS_CMD_FDISC:
11110         case ELS_CMD_PDISC:
11111                 logi = (la_els_logi_t *)ubp->ub_buffer;
11112                 emlxs_swap_service_params(
11113                     (SERV_PARM *)&logi->common_service);
11114                 break;
11115 
11116                 /* ULP handles this */
11117         case ELS_CMD_LOGO:
11118         case ELS_CMD_PRLI:
11119         case ELS_CMD_PRLO:
11120         case ELS_CMD_ADISC:
11121         default:
11122                 break;
11123         }
11124 
11125         return;
11126 
11127 } /* emlxs_swap_els_ub() */
11128 
11129 
11130 #endif  /* EMLXS_MODREV2X */
11131 
11132 
11133 extern char *
11134 emlxs_mode_xlate(uint32_t mode)
11135 {
11136         static char     buffer[32];
11137         uint32_t        i;
11138         uint32_t        count;
11139 
11140         count = sizeof (emlxs_mode_table) / sizeof (emlxs_table_t);
11141         for (i = 0; i < count; i++) {
11142                 if (mode == emlxs_mode_table[i].code) {
11143                         return (emlxs_mode_table[i].string);
11144                 }
11145         }
11146 
11147         (void) snprintf(buffer, sizeof (buffer), "Unknown (%x)", mode);
11148         return (buffer);
11149 
11150 } /* emlxs_mode_xlate() */
11151 
11152 
11153 extern char *
11154 emlxs_elscmd_xlate(uint32_t elscmd)
11155 {
11156         static char     buffer[32];
11157         uint32_t        i;
11158         uint32_t        count;
11159 
11160         count = sizeof (emlxs_elscmd_table) / sizeof (emlxs_table_t);
11161         for (i = 0; i < count; i++) {
11162                 if (elscmd == emlxs_elscmd_table[i].code) {
11163                         return (emlxs_elscmd_table[i].string);
11164                 }
11165         }
11166 
11167         (void) snprintf(buffer, sizeof (buffer), "ELS=0x%x", elscmd);
11168         return (buffer);
11169 
11170 } /* emlxs_elscmd_xlate() */
11171 
11172 
11173 extern char *
11174 emlxs_ctcmd_xlate(uint32_t ctcmd)
11175 {
11176         static char     buffer[32];
11177         uint32_t        i;
11178         uint32_t        count;
11179 
11180         count = sizeof (emlxs_ctcmd_table) / sizeof (emlxs_table_t);
11181         for (i = 0; i < count; i++) {
11182                 if (ctcmd == emlxs_ctcmd_table[i].code) {
11183                         return (emlxs_ctcmd_table[i].string);
11184                 }
11185         }
11186 
11187         (void) snprintf(buffer, sizeof (buffer), "cmd=0x%x", ctcmd);
11188         return (buffer);
11189 
11190 } /* emlxs_ctcmd_xlate() */
11191 
11192 
11193 #ifdef MENLO_SUPPORT
11194 extern char *
11195 emlxs_menlo_cmd_xlate(uint32_t cmd)
11196 {
11197         static char     buffer[32];
11198         uint32_t        i;
11199         uint32_t        count;
11200 
11201         count = sizeof (emlxs_menlo_cmd_table) / sizeof (emlxs_table_t);
11202         for (i = 0; i < count; i++) {
11203                 if (cmd == emlxs_menlo_cmd_table[i].code) {
11204                         return (emlxs_menlo_cmd_table[i].string);
11205                 }
11206         }
11207 
11208         (void) snprintf(buffer, sizeof (buffer), "Cmd=0x%x", cmd);
11209         return (buffer);
11210 
11211 } /* emlxs_menlo_cmd_xlate() */
11212 
11213 extern char *
11214 emlxs_menlo_rsp_xlate(uint32_t rsp)
11215 {
11216         static char     buffer[32];
11217         uint32_t        i;
11218         uint32_t        count;
11219 
11220         count = sizeof (emlxs_menlo_rsp_table) / sizeof (emlxs_table_t);
11221         for (i = 0; i < count; i++) {
11222                 if (rsp == emlxs_menlo_rsp_table[i].code) {
11223                         return (emlxs_menlo_rsp_table[i].string);
11224                 }
11225         }
11226 
11227         (void) snprintf(buffer, sizeof (buffer), "Rsp=0x%x", rsp);
11228         return (buffer);
11229 
11230 } /* emlxs_menlo_rsp_xlate() */
11231 
11232 #endif /* MENLO_SUPPORT */
11233 
11234 
11235 extern char *
11236 emlxs_rmcmd_xlate(uint32_t rmcmd)
11237 {
11238         static char     buffer[32];
11239         uint32_t        i;
11240         uint32_t        count;
11241 
11242         count = sizeof (emlxs_rmcmd_table) / sizeof (emlxs_table_t);
11243         for (i = 0; i < count; i++) {
11244                 if (rmcmd == emlxs_rmcmd_table[i].code) {
11245                         return (emlxs_rmcmd_table[i].string);
11246                 }
11247         }
11248 
11249         (void) snprintf(buffer, sizeof (buffer), "RM=0x%x", rmcmd);
11250         return (buffer);
11251 
11252 } /* emlxs_rmcmd_xlate() */
11253 
11254 
11255 
11256 extern char *
11257 emlxs_mscmd_xlate(uint16_t mscmd)
11258 {
11259         static char     buffer[32];
11260         uint32_t        i;
11261         uint32_t        count;
11262 
11263         count = sizeof (emlxs_mscmd_table) / sizeof (emlxs_table_t);
11264         for (i = 0; i < count; i++) {
11265                 if (mscmd == emlxs_mscmd_table[i].code) {
11266                         return (emlxs_mscmd_table[i].string);
11267                 }
11268         }
11269 
11270         (void) snprintf(buffer, sizeof (buffer), "Cmd=0x%x", mscmd);
11271         return (buffer);
11272 
11273 } /* emlxs_mscmd_xlate() */
11274 
11275 
11276 extern char *
11277 emlxs_state_xlate(uint8_t state)
11278 {
11279         static char     buffer[32];
11280         uint32_t        i;
11281         uint32_t        count;
11282 
11283         count = sizeof (emlxs_state_table) / sizeof (emlxs_table_t);
11284         for (i = 0; i < count; i++) {
11285                 if (state == emlxs_state_table[i].code) {
11286                         return (emlxs_state_table[i].string);
11287                 }
11288         }
11289 
11290         (void) snprintf(buffer, sizeof (buffer), "State=0x%x", state);
11291         return (buffer);
11292 
11293 } /* emlxs_state_xlate() */
11294 
11295 
11296 extern char *
11297 emlxs_error_xlate(uint8_t errno)
11298 {
11299         static char     buffer[32];
11300         uint32_t        i;
11301         uint32_t        count;
11302 
11303         count = sizeof (emlxs_error_table) / sizeof (emlxs_table_t);
11304         for (i = 0; i < count; i++) {
11305                 if (errno == emlxs_error_table[i].code) {
11306                         return (emlxs_error_table[i].string);
11307                 }
11308         }
11309 
11310         (void) snprintf(buffer, sizeof (buffer), "Errno=0x%x", errno);
11311         return (buffer);
11312 
11313 } /* emlxs_error_xlate() */
11314 
11315 
11316 static int
11317 emlxs_pm_lower_power(dev_info_t *dip)
11318 {
11319         int             ddiinst;
11320         int             emlxinst;
11321         emlxs_config_t  *cfg;
11322         int32_t         rval;
11323         emlxs_hba_t     *hba;
11324 
11325         ddiinst = ddi_get_instance(dip);
11326         emlxinst = emlxs_get_instance(ddiinst);
11327         hba = emlxs_device.hba[emlxinst];
11328         cfg = &CFG;
11329 
11330         rval = DDI_SUCCESS;
11331 
11332         /* Lower the power level */
11333         if (cfg[CFG_PM_SUPPORT].current) {
11334                 rval =
11335                     pm_lower_power(dip, EMLXS_PM_ADAPTER,
11336                     EMLXS_PM_ADAPTER_DOWN);
11337         } else {
11338                 /* We do not have kernel support of power management enabled */
11339                 /* therefore, call our power management routine directly */
11340                 rval =
11341                     emlxs_power(dip, EMLXS_PM_ADAPTER, EMLXS_PM_ADAPTER_DOWN);
11342         }
11343 
11344         return (rval);
11345 
11346 } /* emlxs_pm_lower_power() */
11347 
11348 
11349 static int
11350 emlxs_pm_raise_power(dev_info_t *dip)
11351 {
11352         int             ddiinst;
11353         int             emlxinst;
11354         emlxs_config_t  *cfg;
11355         int32_t         rval;
11356         emlxs_hba_t     *hba;
11357 
11358         ddiinst = ddi_get_instance(dip);
11359         emlxinst = emlxs_get_instance(ddiinst);
11360         hba = emlxs_device.hba[emlxinst];
11361         cfg = &CFG;
11362 
11363         /* Raise the power level */
11364         if (cfg[CFG_PM_SUPPORT].current) {
11365                 rval =
11366                     pm_raise_power(dip, EMLXS_PM_ADAPTER,
11367                     EMLXS_PM_ADAPTER_UP);
11368         } else {
11369                 /* We do not have kernel support of power management enabled */
11370                 /* therefore, call our power management routine directly */
11371                 rval =
11372                     emlxs_power(dip, EMLXS_PM_ADAPTER, EMLXS_PM_ADAPTER_UP);
11373         }
11374 
11375         return (rval);
11376 
11377 } /* emlxs_pm_raise_power() */
11378 
11379 
11380 #ifdef IDLE_TIMER
11381 
11382 extern int
11383 emlxs_pm_busy_component(emlxs_hba_t *hba)
11384 {
11385         emlxs_config_t  *cfg = &CFG;
11386         int             rval;
11387 
11388         hba->pm_active = 1;
11389 
11390         if (hba->pm_busy) {
11391                 return (DDI_SUCCESS);
11392         }
11393 
11394         mutex_enter(&EMLXS_PM_LOCK);
11395 
11396         if (hba->pm_busy) {
11397                 mutex_exit(&EMLXS_PM_LOCK);
11398                 return (DDI_SUCCESS);
11399         }
11400         hba->pm_busy = 1;
11401 
11402         mutex_exit(&EMLXS_PM_LOCK);
11403 
11404         /* Attempt to notify system that we are busy */
11405         if (cfg[CFG_PM_SUPPORT].current) {
11406                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
11407                     "pm_busy_component.");
11408 
11409                 rval = pm_busy_component(dip, EMLXS_PM_ADAPTER);
11410 
11411                 if (rval != DDI_SUCCESS) {
11412                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
11413                             "pm_busy_component failed. ret=%d", rval);
11414 
11415                         /* If this attempt failed then clear our flags */
11416                         mutex_enter(&EMLXS_PM_LOCK);
11417                         hba->pm_busy = 0;
11418                         mutex_exit(&EMLXS_PM_LOCK);
11419 
11420                         return (rval);
11421                 }
11422         }
11423 
11424         return (DDI_SUCCESS);
11425 
11426 } /* emlxs_pm_busy_component() */
11427 
11428 
11429 extern int
11430 emlxs_pm_idle_component(emlxs_hba_t *hba)
11431 {
11432         emlxs_config_t  *cfg = &CFG;
11433         int             rval;
11434 
11435         if (!hba->pm_busy) {
11436                 return (DDI_SUCCESS);
11437         }
11438 
11439         mutex_enter(&EMLXS_PM_LOCK);
11440 
11441         if (!hba->pm_busy) {
11442                 mutex_exit(&EMLXS_PM_LOCK);
11443                 return (DDI_SUCCESS);
11444         }
11445         hba->pm_busy = 0;
11446 
11447         mutex_exit(&EMLXS_PM_LOCK);
11448 
11449         if (cfg[CFG_PM_SUPPORT].current) {
11450                 EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
11451                     "pm_idle_component.");
11452 
11453                 rval = pm_idle_component(dip, EMLXS_PM_ADAPTER);
11454 
11455                 if (rval != DDI_SUCCESS) {
11456                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_sfs_debug_msg,
11457                             "pm_idle_component failed. ret=%d", rval);
11458 
11459                         /* If this attempt failed then */
11460                         /* reset our flags for another attempt */
11461                         mutex_enter(&EMLXS_PM_LOCK);
11462                         hba->pm_busy = 1;
11463                         mutex_exit(&EMLXS_PM_LOCK);
11464 
11465                         return (rval);
11466                 }
11467         }
11468 
11469         return (DDI_SUCCESS);
11470 
11471 } /* emlxs_pm_idle_component() */
11472 
11473 
11474 extern void
11475 emlxs_pm_idle_timer(emlxs_hba_t *hba)
11476 {
11477         emlxs_config_t *cfg = &CFG;
11478 
11479         if (hba->pm_active) {
11480                 /* Clear active flag and reset idle timer */
11481                 mutex_enter(&EMLXS_PM_LOCK);
11482                 hba->pm_active = 0;
11483                 hba->pm_idle_timer =
11484                     hba->timer_tics + cfg[CFG_PM_IDLE].current;
11485                 mutex_exit(&EMLXS_PM_LOCK);
11486         }
11487 
11488         /* Check for idle timeout */
11489         else if (hba->timer_tics >= hba->pm_idle_timer) {
11490                 if (emlxs_pm_idle_component(hba) == DDI_SUCCESS) {
11491                         mutex_enter(&EMLXS_PM_LOCK);
11492                         hba->pm_idle_timer =
11493                             hba->timer_tics + cfg[CFG_PM_IDLE].current;
11494                         mutex_exit(&EMLXS_PM_LOCK);
11495                 }
11496         }
11497 
11498         return;
11499 
11500 } /* emlxs_pm_idle_timer() */
11501 
11502 #endif  /* IDLE_TIMER */
11503 
11504 
11505 #if (EMLXS_MODREV >= EMLXS_MODREV3) && (EMLXS_MODREV <= EMLXS_MODREV4)
11506 static void
11507 emlxs_read_vport_prop(emlxs_hba_t *hba)
11508 {
11509         emlxs_port_t    *port = &PPORT;
11510         emlxs_config_t  *cfg = &CFG;
11511         char            **arrayp;
11512         uint8_t         *s;
11513         uint8_t         *np;
11514         NAME_TYPE       pwwpn;
11515         NAME_TYPE       wwnn;
11516         NAME_TYPE       wwpn;
11517         uint32_t        vpi;
11518         uint32_t        cnt;
11519         uint32_t        rval;
11520         uint32_t        i;
11521         uint32_t        j;
11522         uint32_t        c1;
11523         uint32_t        sum;
11524         uint32_t        errors;
11525         char            buffer[64];
11526 
11527         /* Check for the per adapter vport setting */
11528         (void) snprintf(buffer, sizeof (buffer), "%s%d-vport", DRIVER_NAME,
11529             hba->ddiinst);
11530         cnt = 0;
11531         arrayp = NULL;
11532         rval =
11533             ddi_prop_lookup_string_array(DDI_DEV_T_ANY, hba->dip,
11534             (DDI_PROP_DONTPASS), buffer, &arrayp, &cnt);
11535 
11536         if ((rval != DDI_PROP_SUCCESS) || !cnt || !arrayp) {
11537                 /* Check for the global vport setting */
11538                 cnt = 0;
11539                 arrayp = NULL;
11540                 rval =
11541                     ddi_prop_lookup_string_array(DDI_DEV_T_ANY, hba->dip,
11542                     (DDI_PROP_DONTPASS), "vport", &arrayp, &cnt);
11543         }
11544 
11545         if ((rval != DDI_PROP_SUCCESS) || !cnt || !arrayp) {
11546                 return;
11547         }
11548 
11549         for (i = 0; i < cnt; i++) {
11550                 errors = 0;
11551                 s = (uint8_t *)arrayp[i];
11552 
11553                 if (!s) {
11554                         break;
11555                 }
11556 
11557                 np = (uint8_t *)&pwwpn;
11558                 for (j = 0; j < sizeof (NAME_TYPE); j++) {
11559                         c1 = *s++;
11560                         if ((c1 >= '0') && (c1 <= '9')) {
11561                                 sum = ((c1 - '0') << 4);
11562                         } else if ((c1 >= 'a') && (c1 <= 'f')) {
11563                                 sum = ((c1 - 'a' + 10) << 4);
11564                         } else if ((c1 >= 'A') && (c1 <= 'F')) {
11565                                 sum = ((c1 - 'A' + 10) << 4);
11566                         } else {
11567                                 EMLXS_MSGF(EMLXS_CONTEXT,
11568                                     &emlxs_attach_debug_msg,
11569                                     "Config error: Invalid PWWPN found. "
11570                                     "entry=%d byte=%d hi_nibble=%c",
11571                                     i, j, c1);
11572                                 errors++;
11573                         }
11574 
11575                         c1 = *s++;
11576                         if ((c1 >= '0') && (c1 <= '9')) {
11577                                 sum |= (c1 - '0');
11578                         } else if ((c1 >= 'a') && (c1 <= 'f')) {
11579                                 sum |= (c1 - 'a' + 10);
11580                         } else if ((c1 >= 'A') && (c1 <= 'F')) {
11581                                 sum |= (c1 - 'A' + 10);
11582                         } else {
11583                                 EMLXS_MSGF(EMLXS_CONTEXT,
11584                                     &emlxs_attach_debug_msg,
11585                                     "Config error: Invalid PWWPN found. "
11586                                     "entry=%d byte=%d lo_nibble=%c",
11587                                     i, j, c1);
11588                                 errors++;
11589                         }
11590 
11591                         *np++ = (uint8_t)sum;
11592                 }
11593 
11594                 if (*s++ != ':') {
11595                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
11596                             "Config error: Invalid delimiter after PWWPN. "
11597                             "entry=%d", i);
11598                         goto out;
11599                 }
11600 
11601                 np = (uint8_t *)&wwnn;
11602                 for (j = 0; j < sizeof (NAME_TYPE); j++) {
11603                         c1 = *s++;
11604                         if ((c1 >= '0') && (c1 <= '9')) {
11605                                 sum = ((c1 - '0') << 4);
11606                         } else if ((c1 >= 'a') && (c1 <= 'f')) {
11607                                 sum = ((c1 - 'a' + 10) << 4);
11608                         } else if ((c1 >= 'A') && (c1 <= 'F')) {
11609                                 sum = ((c1 - 'A' + 10) << 4);
11610                         } else {
11611                                 EMLXS_MSGF(EMLXS_CONTEXT,
11612                                     &emlxs_attach_debug_msg,
11613                                     "Config error: Invalid WWNN found. "
11614                                     "entry=%d byte=%d hi_nibble=%c",
11615                                     i, j, c1);
11616                                 errors++;
11617                         }
11618 
11619                         c1 = *s++;
11620                         if ((c1 >= '0') && (c1 <= '9')) {
11621                                 sum |= (c1 - '0');
11622                         } else if ((c1 >= 'a') && (c1 <= 'f')) {
11623                                 sum |= (c1 - 'a' + 10);
11624                         } else if ((c1 >= 'A') && (c1 <= 'F')) {
11625                                 sum |= (c1 - 'A' + 10);
11626                         } else {
11627                                 EMLXS_MSGF(EMLXS_CONTEXT,
11628                                     &emlxs_attach_debug_msg,
11629                                     "Config error: Invalid WWNN found. "
11630                                     "entry=%d byte=%d lo_nibble=%c",
11631                                     i, j, c1);
11632                                 errors++;
11633                         }
11634 
11635                         *np++ = (uint8_t)sum;
11636                 }
11637 
11638                 if (*s++ != ':') {
11639                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
11640                             "Config error: Invalid delimiter after WWNN. "
11641                             "entry=%d", i);
11642                         goto out;
11643                 }
11644 
11645                 np = (uint8_t *)&wwpn;
11646                 for (j = 0; j < sizeof (NAME_TYPE); j++) {
11647                         c1 = *s++;
11648                         if ((c1 >= '0') && (c1 <= '9')) {
11649                                 sum = ((c1 - '0') << 4);
11650                         } else if ((c1 >= 'a') && (c1 <= 'f')) {
11651                                 sum = ((c1 - 'a' + 10) << 4);
11652                         } else if ((c1 >= 'A') && (c1 <= 'F')) {
11653                                 sum = ((c1 - 'A' + 10) << 4);
11654                         } else {
11655                                 EMLXS_MSGF(EMLXS_CONTEXT,
11656                                     &emlxs_attach_debug_msg,
11657                                     "Config error: Invalid WWPN found. "
11658                                     "entry=%d byte=%d hi_nibble=%c",
11659                                     i, j, c1);
11660 
11661                                 errors++;
11662                         }
11663 
11664                         c1 = *s++;
11665                         if ((c1 >= '0') && (c1 <= '9')) {
11666                                 sum |= (c1 - '0');
11667                         } else if ((c1 >= 'a') && (c1 <= 'f')) {
11668                                 sum |= (c1 - 'a' + 10);
11669                         } else if ((c1 >= 'A') && (c1 <= 'F')) {
11670                                 sum |= (c1 - 'A' + 10);
11671                         } else {
11672                                 EMLXS_MSGF(EMLXS_CONTEXT,
11673                                     &emlxs_attach_debug_msg,
11674                                     "Config error: Invalid WWPN found. "
11675                                     "entry=%d byte=%d lo_nibble=%c",
11676                                     i, j, c1);
11677 
11678                                 errors++;
11679                         }
11680 
11681                         *np++ = (uint8_t)sum;
11682                 }
11683 
11684                 if (*s++ != ':') {
11685                         EMLXS_MSGF(EMLXS_CONTEXT, &emlxs_attach_debug_msg,
11686                             "Config error: Invalid delimiter after WWPN. "
11687                             "entry=%d", i);
11688 
11689                         goto out;
11690                 }
11691 
11692                 sum = 0;
11693                 do {
11694                         c1 = *s++;
11695                         if ((c1 < '0') || (c1 > '9')) {
11696                                 EMLXS_MSGF(EMLXS_CONTEXT,
11697                                     &emlxs_attach_debug_msg,
11698                                     "Config error: Invalid VPI found. "
11699                                     "entry=%d c=%c vpi=%d", i, c1, sum);
11700 
11701                                 goto out;
11702                         }
11703 
11704                         sum = (sum * 10) + (c1 - '0');
11705 
11706                 } while (*s != 0);
11707 
11708                 vpi = sum;
11709 
11710                 if (errors) {
11711                         continue;
11712                 }
11713 
11714                 /* Entry has been read */
11715 
11716                 /* Check if the physical port wwpn */
11717                 /* matches our physical port wwpn */
11718                 if (bcmp((caddr_t)&hba->wwpn, (caddr_t)&pwwpn, 8)) {
11719                         continue;
11720                 }
11721 
11722                 /* Check vpi range */
11723                 if ((vpi == 0) || (vpi >= MAX_VPORTS)) {
11724                         continue;
11725                 }
11726 
11727                 /* Check if port has already been configured */
11728                 if (hba->port[vpi].flag & EMLXS_PORT_CONFIG) {
11729                         continue;
11730                 }
11731 
11732                 /* Set the highest configured vpi */
11733                 if (vpi > hba->vpi_high) {
11734                         hba->vpi_high = vpi;
11735                 }
11736 
11737                 bcopy((caddr_t)&wwnn, (caddr_t)&hba->port[vpi].wwnn,
11738                     sizeof (NAME_TYPE));
11739                 bcopy((caddr_t)&wwpn, (caddr_t)&hba->port[vpi].wwpn,
11740                     sizeof (NAME_TYPE));
11741 
11742                 if (hba->port[vpi].snn[0] == 0) {
11743                         (void) strncpy((caddr_t)hba->port[vpi].snn,
11744                             (caddr_t)hba->snn,
11745                             (sizeof (hba->port[vpi].snn)-1));
11746                 }
11747 
11748                 if (hba->port[vpi].spn[0] == 0) {
11749                         (void) snprintf((caddr_t)hba->port[vpi].spn,
11750                             sizeof (hba->port[vpi].spn),
11751                             "%s VPort-%d",
11752                             (caddr_t)hba->spn, vpi);
11753                 }
11754 
11755                 hba->port[vpi].flag |=
11756                     (EMLXS_PORT_CONFIG | EMLXS_PORT_ENABLED);
11757 
11758                 if (cfg[CFG_VPORT_RESTRICTED].current) {
11759                         hba->port[vpi].flag |= EMLXS_PORT_RESTRICTED;
11760                 }
11761         }
11762 
11763 out:
11764 
11765         (void) ddi_prop_free((void *) arrayp);
11766         return;
11767 
11768 } /* emlxs_read_vport_prop() */
11769 #endif  /* EMLXS_MODREV3 || EMLXS_MODREV4 */
11770 
11771 
11772 extern char *
11773 emlxs_wwn_xlate(char *buffer, size_t len, uint8_t *wwn)
11774 {
11775         (void) snprintf(buffer, len, "%02x%02x%02x%02x%02x%02x%02x%02x",
11776             wwn[0] & 0xff, wwn[1] & 0xff, wwn[2] & 0xff, wwn[3] & 0xff,
11777             wwn[4] & 0xff, wwn[5] & 0xff, wwn[6] & 0xff, wwn[7] & 0xff);
11778 
11779         return (buffer);
11780 
11781 } /* emlxs_wwn_xlate() */
11782 
11783 
11784 extern int32_t
11785 emlxs_wwn_cmp(uint8_t *wwn1, uint8_t *wwn2)
11786 {
11787         uint32_t i;
11788 
11789         for (i = 0; i < 8; i ++, wwn1 ++, wwn2 ++) {
11790                 if (*wwn1 > *wwn2) {
11791                         return (1);
11792                 }
11793                 if (*wwn1 < *wwn2) {
11794                         return (-1);
11795                 }
11796         }
11797 
11798         return (0);
11799 
11800 } /* emlxs_wwn_cmp() */
11801 
11802 
11803 /* This is called at port online and offline */
11804 extern void
11805 emlxs_ub_flush(emlxs_port_t *port)
11806 {
11807         emlxs_hba_t     *hba = HBA;
11808         fc_unsol_buf_t  *ubp;
11809         emlxs_ub_priv_t *ub_priv;
11810         emlxs_ub_priv_t *next;
11811 
11812         /* Return if nothing to do */
11813         if (!port->ub_wait_head) {
11814                 return;
11815         }
11816 
11817         mutex_enter(&EMLXS_PORT_LOCK);
11818         ub_priv = port->ub_wait_head;
11819         port->ub_wait_head = NULL;
11820         port->ub_wait_tail = NULL;
11821         mutex_exit(&EMLXS_PORT_LOCK);
11822 
11823         while (ub_priv) {
11824                 next = ub_priv->next;
11825                 ubp = ub_priv->ubp;
11826 
11827                 /* Check if ULP is online and we have a callback function */
11828                 if (port->ulp_statec != FC_STATE_OFFLINE) {
11829                         /* Send ULP the ub buffer */
11830                         emlxs_ulp_unsol_cb(port, ubp);
11831                 } else {        /* Drop the buffer */
11832                         (void) emlxs_fca_ub_release(port, 1, &ubp->ub_token);
11833                 }
11834 
11835                 ub_priv = next;
11836 
11837         }       /* while () */
11838 
11839         return;
11840 
11841 } /* emlxs_ub_flush() */
11842 
11843 
11844 extern void
11845 emlxs_ub_callback(emlxs_port_t *port, fc_unsol_buf_t *ubp)
11846 {
11847         emlxs_hba_t     *hba = HBA;
11848         emlxs_ub_priv_t *ub_priv;
11849 
11850         ub_priv = ubp->ub_fca_private;
11851 
11852         /* Check if ULP is online */
11853         if (port->ulp_statec != FC_STATE_OFFLINE) {
11854                 emlxs_ulp_unsol_cb(port, ubp);
11855 
11856         } else {        /* ULP offline */
11857 
11858                 if (hba->state >= FC_LINK_UP) {
11859                         /* Add buffer to queue tail */
11860                         mutex_enter(&EMLXS_PORT_LOCK);
11861 
11862                         if (port->ub_wait_tail) {
11863                                 port->ub_wait_tail->next = ub_priv;
11864                         }
11865                         port->ub_wait_tail = ub_priv;
11866 
11867                         if (!port->ub_wait_head) {
11868                                 port->ub_wait_head = ub_priv;
11869                         }
11870 
11871                         mutex_exit(&EMLXS_PORT_LOCK);
11872                 } else {
11873                         (void) emlxs_fca_ub_release(port, 1, &ubp->ub_token);
11874                 }
11875         }
11876 
11877         return;
11878 
11879 } /* emlxs_ub_callback() */
11880 
11881 
11882 extern void
11883 emlxs_fca_link_up(emlxs_port_t *port)
11884 {
11885         emlxs_ulp_statec_cb(port, port->ulp_statec);
11886         return;
11887 
11888 } /* emlxs_fca_link_up() */
11889 
11890 
11891 extern void
11892 emlxs_fca_link_down(emlxs_port_t *port)
11893 {
11894         emlxs_ulp_statec_cb(port, FC_STATE_OFFLINE);
11895         return;
11896 
11897 } /* emlxs_fca_link_down() */
11898 
11899 
11900 static uint32_t
11901 emlxs_integrity_check(emlxs_hba_t *hba)
11902 {
11903         uint32_t size;
11904         uint32_t errors = 0;
11905         int ddiinst = hba->ddiinst;
11906 
11907         size = 16;
11908         if (sizeof (ULP_BDL) != size) {
11909                 cmn_err(CE_WARN, "?%s%d: ULP_BDL size incorrect.  %d != 16",
11910                     DRIVER_NAME, ddiinst, (int)sizeof (ULP_BDL));
11911 
11912                 errors++;
11913         }
11914         size = 8;
11915         if (sizeof (ULP_BDE) != size) {
11916                 cmn_err(CE_WARN, "?%s%d: ULP_BDE size incorrect.  %d != 8",
11917                     DRIVER_NAME, ddiinst, (int)sizeof (ULP_BDE));
11918 
11919                 errors++;
11920         }
11921         size = 12;
11922         if (sizeof (ULP_BDE64) != size) {
11923                 cmn_err(CE_WARN, "?%s%d: ULP_BDE64 size incorrect.  %d != 12",
11924                     DRIVER_NAME, ddiinst, (int)sizeof (ULP_BDE64));
11925 
11926                 errors++;
11927         }
11928         size = 16;
11929         if (sizeof (HBQE_t) != size) {
11930                 cmn_err(CE_WARN, "?%s%d: HBQE size incorrect.  %d != 16",
11931                     DRIVER_NAME, ddiinst, (int)sizeof (HBQE_t));
11932 
11933                 errors++;
11934         }
11935         size = 8;
11936         if (sizeof (HGP) != size) {
11937                 cmn_err(CE_WARN, "?%s%d: HGP size incorrect.  %d != 8",
11938                     DRIVER_NAME, ddiinst, (int)sizeof (HGP));
11939 
11940                 errors++;
11941         }
11942         if (sizeof (PGP) != size) {
11943                 cmn_err(CE_WARN, "?%s%d: PGP size incorrect.  %d != 8",
11944                     DRIVER_NAME, ddiinst, (int)sizeof (PGP));
11945 
11946                 errors++;
11947         }
11948         size = 4;
11949         if (sizeof (WORD5) != size) {
11950                 cmn_err(CE_WARN, "?%s%d: WORD5 size incorrect.  %d != 4",
11951                     DRIVER_NAME, ddiinst, (int)sizeof (WORD5));
11952 
11953                 errors++;
11954         }
11955         size = 124;
11956         if (sizeof (MAILVARIANTS) != size) {
11957                 cmn_err(CE_WARN, "?%s%d: MAILVARIANTS size incorrect.  "
11958                     "%d != 124", DRIVER_NAME, ddiinst,
11959                     (int)sizeof (MAILVARIANTS));
11960 
11961                 errors++;
11962         }
11963         size = 128;
11964         if (sizeof (SLI1_DESC) != size) {
11965                 cmn_err(CE_WARN, "?%s%d: SLI1_DESC size incorrect.  %d != 128",
11966                     DRIVER_NAME, ddiinst, (int)sizeof (SLI1_DESC));
11967 
11968                 errors++;
11969         }
11970         if (sizeof (SLI2_DESC) != size) {
11971                 cmn_err(CE_WARN, "?%s%d: SLI2_DESC size incorrect.  %d != 128",
11972                     DRIVER_NAME, ddiinst, (int)sizeof (SLI2_DESC));
11973 
11974                 errors++;
11975         }
11976         size = MBOX_SIZE;
11977         if (sizeof (MAILBOX) != size) {
11978                 cmn_err(CE_WARN, "?%s%d: MAILBOX size incorrect.  %d != %d",
11979                     DRIVER_NAME, ddiinst, (int)sizeof (MAILBOX), MBOX_SIZE);
11980 
11981                 errors++;
11982         }
11983         size = PCB_SIZE;
11984         if (sizeof (PCB) != size) {
11985                 cmn_err(CE_WARN, "?%s%d: PCB size incorrect.  %d != %d",
11986                     DRIVER_NAME, ddiinst, (int)sizeof (PCB), PCB_SIZE);
11987 
11988                 errors++;
11989         }
11990         size = 260;
11991         if (sizeof (ATTRIBUTE_ENTRY) != size) {
11992                 cmn_err(CE_WARN, "?%s%d: ATTRIBUTE_ENTRY size incorrect.  "
11993                     "%d != 260", DRIVER_NAME, ddiinst,
11994                     (int)sizeof (ATTRIBUTE_ENTRY));
11995 
11996                 errors++;
11997         }
11998         size = SLI_SLIM1_SIZE;
11999         if (sizeof (SLIM1) != size) {
12000                 cmn_err(CE_WARN, "?%s%d: SLIM1 size incorrect.  %d != %d",
12001                     DRIVER_NAME, ddiinst, (int)sizeof (SLIM1), SLI_SLIM1_SIZE);
12002 
12003                 errors++;
12004         }
12005         size = SLI3_IOCB_CMD_SIZE;
12006         if (sizeof (IOCB) != size) {
12007                 cmn_err(CE_WARN, "?%s%d: IOCB size incorrect.  %d != %d",
12008                     DRIVER_NAME, ddiinst, (int)sizeof (IOCB),
12009                     SLI3_IOCB_CMD_SIZE);
12010 
12011                 errors++;
12012         }
12013 
12014         size = SLI_SLIM2_SIZE;
12015         if (sizeof (SLIM2) != size) {
12016                 cmn_err(CE_WARN, "?%s%d: SLIM2 size incorrect.  %d != %d",
12017                     DRIVER_NAME, ddiinst, (int)sizeof (SLIM2),
12018                     SLI_SLIM2_SIZE);
12019 
12020                 errors++;
12021         }
12022         return (errors);
12023 
12024 } /* emlxs_integrity_check() */
12025 
12026 
12027 #ifdef FMA_SUPPORT
12028 /*
12029  * FMA support
12030  */
12031 
12032 extern void
12033 emlxs_fm_init(emlxs_hba_t *hba)
12034 {
12035         ddi_iblock_cookie_t iblk;
12036 
12037         if (hba->fm_caps == DDI_FM_NOT_CAPABLE) {
12038                 return;
12039         }
12040 
12041         if (DDI_FM_ACC_ERR_CAP(hba->fm_caps)) {
12042                 emlxs_dev_acc_attr.devacc_attr_access = DDI_FLAGERR_ACC;
12043                 emlxs_data_acc_attr.devacc_attr_access = DDI_FLAGERR_ACC;
12044         }
12045 
12046         if (DDI_FM_DMA_ERR_CAP(hba->fm_caps)) {
12047                 hba->dma_attr.dma_attr_flags |= DDI_DMA_FLAGERR;
12048                 hba->dma_attr_ro.dma_attr_flags |= DDI_DMA_FLAGERR;
12049                 hba->dma_attr_1sg.dma_attr_flags |= DDI_DMA_FLAGERR;
12050                 hba->dma_attr_fcip_rsp.dma_attr_flags |= DDI_DMA_FLAGERR;
12051         } else {
12052                 hba->dma_attr.dma_attr_flags &= ~DDI_DMA_FLAGERR;
12053                 hba->dma_attr_ro.dma_attr_flags &= ~DDI_DMA_FLAGERR;
12054                 hba->dma_attr_1sg.dma_attr_flags &= ~DDI_DMA_FLAGERR;
12055                 hba->dma_attr_fcip_rsp.dma_attr_flags &= ~DDI_DMA_FLAGERR;
12056         }
12057 
12058         ddi_fm_init(hba->dip, &hba->fm_caps, &iblk);
12059 
12060         if (DDI_FM_EREPORT_CAP(hba->fm_caps) ||
12061             DDI_FM_ERRCB_CAP(hba->fm_caps)) {
12062                 pci_ereport_setup(hba->dip);
12063         }
12064 
12065         if (DDI_FM_ERRCB_CAP(hba->fm_caps)) {
12066                 ddi_fm_handler_register(hba->dip, emlxs_fm_error_cb,
12067                     (void *)hba);
12068         }
12069 
12070 } /* emlxs_fm_init() */
12071 
12072 
12073 extern void
12074 emlxs_fm_fini(emlxs_hba_t *hba)
12075 {
12076         if (hba->fm_caps == DDI_FM_NOT_CAPABLE) {
12077                 return;
12078         }
12079 
12080         if (DDI_FM_EREPORT_CAP(hba->fm_caps) ||
12081             DDI_FM_ERRCB_CAP(hba->fm_caps)) {
12082                 pci_ereport_teardown(hba->dip);
12083         }
12084 
12085         if (DDI_FM_ERRCB_CAP(hba->fm_caps)) {
12086                 ddi_fm_handler_unregister(hba->dip);
12087         }
12088 
12089         (void) ddi_fm_fini(hba->dip);
12090 
12091 } /* emlxs_fm_fini() */
12092 
12093 
12094 extern int
12095 emlxs_fm_check_acc_handle(emlxs_hba_t *hba, ddi_acc_handle_t handle)
12096 {
12097         ddi_fm_error_t err;
12098 
12099         if (!DDI_FM_ACC_ERR_CAP(hba->fm_caps)) {
12100                 return (DDI_FM_OK);
12101         }
12102 
12103         /* Some S10 versions do not define the ahi_err structure */
12104         if (((ddi_acc_impl_t *)handle)->ahi_err == NULL) {
12105                 return (DDI_FM_OK);
12106         }
12107 
12108         err.fme_status = DDI_FM_OK;
12109         (void) ddi_fm_acc_err_get(handle, &err, DDI_FME_VERSION);
12110 
12111         /* Some S10 versions do not define the ddi_fm_acc_err_clear function */
12112         if ((void *)&ddi_fm_acc_err_clear != NULL) {
12113                 (void) ddi_fm_acc_err_clear(handle, DDI_FME_VERSION);
12114         }
12115 
12116         return (err.fme_status);
12117 
12118 } /* emlxs_fm_check_acc_handle() */
12119 
12120 
12121 extern int
12122 emlxs_fm_check_dma_handle(emlxs_hba_t *hba, ddi_dma_handle_t handle)
12123 {
12124         ddi_fm_error_t err;
12125 
12126         if (!DDI_FM_ACC_ERR_CAP(hba->fm_caps)) {
12127                 return (DDI_FM_OK);
12128         }
12129 
12130         err.fme_status = DDI_FM_OK;
12131         (void) ddi_fm_dma_err_get(handle, &err, DDI_FME_VERSION);
12132 
12133         return (err.fme_status);
12134 
12135 } /* emlxs_fm_check_dma_handle() */
12136 
12137 
12138 extern void
12139 emlxs_fm_ereport(emlxs_hba_t *hba, char *detail)
12140 {
12141         uint64_t ena;
12142         char buf[FM_MAX_CLASS];
12143 
12144         if (!DDI_FM_EREPORT_CAP(hba->fm_caps)) {
12145                 return;
12146         }
12147 
12148         if (detail == NULL) {
12149                 return;
12150         }
12151 
12152         (void) snprintf(buf, FM_MAX_CLASS, "%s.%s", DDI_FM_DEVICE, detail);
12153         ena = fm_ena_generate(0, FM_ENA_FMT1);
12154 
12155         ddi_fm_ereport_post(hba->dip, buf, ena, DDI_NOSLEEP,
12156             FM_VERSION, DATA_TYPE_UINT8, FM_EREPORT_VERS0, NULL);
12157 
12158 } /* emlxs_fm_ereport() */
12159 
12160 
12161 extern void
12162 emlxs_fm_service_impact(emlxs_hba_t *hba, int impact)
12163 {
12164         if (!DDI_FM_EREPORT_CAP(hba->fm_caps)) {
12165                 return;
12166         }
12167 
12168         if (impact == NULL) {
12169                 return;
12170         }
12171 
12172         if ((hba->pm_state & EMLXS_PM_IN_DETACH) &&
12173             (impact == DDI_SERVICE_DEGRADED)) {
12174                 impact = DDI_SERVICE_UNAFFECTED;
12175         }
12176 
12177         ddi_fm_service_impact(hba->dip, impact);
12178 
12179         return;
12180 
12181 } /* emlxs_fm_service_impact() */
12182 
12183 
12184 /*
12185  * The I/O fault service error handling callback function
12186  */
12187 /*ARGSUSED*/
12188 extern int
12189 emlxs_fm_error_cb(dev_info_t *dip, ddi_fm_error_t *err,
12190     const void *impl_data)
12191 {
12192         /*
12193          * as the driver can always deal with an error
12194          * in any dma or access handle, we can just return
12195          * the fme_status value.
12196          */
12197         pci_ereport_post(dip, err, NULL);
12198         return (err->fme_status);
12199 
12200 } /* emlxs_fm_error_cb() */
12201 
12202 extern void
12203 emlxs_check_dma(emlxs_hba_t *hba, emlxs_buf_t *sbp)
12204 {
12205         emlxs_port_t    *port = sbp->port;
12206         fc_packet_t     *pkt = PRIV2PKT(sbp);
12207 
12208         if (hba->sli_mode == EMLXS_HBA_SLI4_MODE) {
12209                 if (emlxs_fm_check_dma_handle(hba,
12210                     hba->sli.sli4.slim2.dma_handle)
12211                     != DDI_FM_OK) {
12212                         EMLXS_MSGF(EMLXS_CONTEXT,
12213                             &emlxs_invalid_dma_handle_msg,
12214                             "slim2: hdl=%p",
12215                             hba->sli.sli4.slim2.dma_handle);
12216 
12217                         mutex_enter(&EMLXS_PORT_LOCK);
12218                         hba->flag |= FC_DMA_CHECK_ERROR;
12219                         mutex_exit(&EMLXS_PORT_LOCK);
12220                 }
12221         } else {
12222                 if (emlxs_fm_check_dma_handle(hba,
12223                     hba->sli.sli3.slim2.dma_handle)
12224                     != DDI_FM_OK) {
12225                         EMLXS_MSGF(EMLXS_CONTEXT,
12226                             &emlxs_invalid_dma_handle_msg,
12227                             "slim2: hdl=%p",
12228                             hba->sli.sli3.slim2.dma_handle);
12229 
12230                         mutex_enter(&EMLXS_PORT_LOCK);
12231                         hba->flag |= FC_DMA_CHECK_ERROR;
12232                         mutex_exit(&EMLXS_PORT_LOCK);
12233                 }
12234         }
12235 
12236         if (hba->flag & FC_DMA_CHECK_ERROR) {
12237                 pkt->pkt_state  = FC_PKT_TRAN_ERROR;
12238                 pkt->pkt_reason = FC_REASON_DMA_ERROR;
12239                 pkt->pkt_expln  = FC_EXPLN_NONE;
12240                 pkt->pkt_action = FC_ACTION_RETRYABLE;
12241                 return;
12242         }
12243 
12244         if (pkt->pkt_cmdlen) {
12245                 if (emlxs_fm_check_dma_handle(hba, pkt->pkt_cmd_dma)
12246                     != DDI_FM_OK) {
12247                         EMLXS_MSGF(EMLXS_CONTEXT,
12248                             &emlxs_invalid_dma_handle_msg,
12249                             "pkt_cmd_dma: hdl=%p",
12250                             pkt->pkt_cmd_dma);
12251 
12252                         pkt->pkt_state  = FC_PKT_TRAN_ERROR;
12253                         pkt->pkt_reason = FC_REASON_DMA_ERROR;
12254                         pkt->pkt_expln  = FC_EXPLN_NONE;
12255                         pkt->pkt_action = FC_ACTION_RETRYABLE;
12256 
12257                         return;
12258                 }
12259         }
12260 
12261         if (pkt->pkt_rsplen) {
12262                 if (emlxs_fm_check_dma_handle(hba, pkt->pkt_resp_dma)
12263                     != DDI_FM_OK) {
12264                         EMLXS_MSGF(EMLXS_CONTEXT,
12265                             &emlxs_invalid_dma_handle_msg,
12266                             "pkt_resp_dma: hdl=%p",
12267                             pkt->pkt_resp_dma);
12268 
12269                         pkt->pkt_state  = FC_PKT_TRAN_ERROR;
12270                         pkt->pkt_reason = FC_REASON_DMA_ERROR;
12271                         pkt->pkt_expln  = FC_EXPLN_NONE;
12272                         pkt->pkt_action = FC_ACTION_RETRYABLE;
12273 
12274                         return;
12275                 }
12276         }
12277 
12278         if (pkt->pkt_datalen) {
12279                 if (emlxs_fm_check_dma_handle(hba, pkt->pkt_data_dma)
12280                     != DDI_FM_OK) {
12281                         EMLXS_MSGF(EMLXS_CONTEXT,
12282                             &emlxs_invalid_dma_handle_msg,
12283                             "pkt_data_dma: hdl=%p",
12284                             pkt->pkt_data_dma);
12285 
12286                         pkt->pkt_state  = FC_PKT_TRAN_ERROR;
12287                         pkt->pkt_reason = FC_REASON_DMA_ERROR;
12288                         pkt->pkt_expln  = FC_EXPLN_NONE;
12289                         pkt->pkt_action = FC_ACTION_RETRYABLE;
12290 
12291                         return;
12292                 }
12293         }
12294 
12295         return;
12296 
12297 }
12298 #endif  /* FMA_SUPPORT */
12299 
12300 
12301 extern void
12302 emlxs_swap32_buffer(uint8_t *buffer, uint32_t size)
12303 {
12304         uint32_t word;
12305         uint32_t *wptr;
12306         uint32_t i;
12307 
12308         VERIFY((size % 4) == 0);
12309 
12310         wptr = (uint32_t *)buffer;
12311 
12312         for (i = 0; i < size / 4; i++) {
12313                 word = *wptr;
12314                 *wptr++ = SWAP32(word);
12315         }
12316 
12317         return;
12318 
12319 }  /* emlxs_swap32_buffer() */
12320 
12321 
12322 extern void
12323 emlxs_swap32_bcopy(uint8_t *src, uint8_t *dst, uint32_t size)
12324 {
12325         uint32_t word;
12326         uint32_t *sptr;
12327         uint32_t *dptr;
12328         uint32_t i;
12329 
12330         VERIFY((size % 4) == 0);
12331 
12332         sptr = (uint32_t *)src;
12333         dptr = (uint32_t *)dst;
12334 
12335         for (i = 0; i < size / 4; i++) {
12336                 word = *sptr++;
12337                 *dptr++ = SWAP32(word);
12338         }
12339 
12340         return;
12341 
12342 }  /* emlxs_swap32_buffer() */
12343 
12344 
12345 extern char *
12346 emlxs_strtoupper(char *str)
12347 {
12348         char *cptr = str;
12349 
12350         while (*cptr) {
12351                 if ((*cptr >= 'a') && (*cptr <= 'z')) {
12352                         *cptr -= ('a' - 'A');
12353                 }
12354                 cptr++;
12355         }
12356 
12357         return (str);
12358 
12359 } /* emlxs_strtoupper() */
12360 
12361 
12362 extern void
12363 emlxs_ulp_statec_cb(emlxs_port_t *port, uint32_t statec)
12364 {
12365         emlxs_hba_t *hba = HBA;
12366 
12367         /* This routine coordinates protection with emlxs_fca_unbind_port() */
12368 
12369         mutex_enter(&EMLXS_PORT_LOCK);
12370         if (!(port->flag & EMLXS_INI_BOUND)) {
12371                 mutex_exit(&EMLXS_PORT_LOCK);
12372                 return;
12373         }
12374         port->ulp_busy++;
12375         mutex_exit(&EMLXS_PORT_LOCK);
12376 
12377         port->ulp_statec_cb(port->ulp_handle, statec);
12378 
12379         mutex_enter(&EMLXS_PORT_LOCK);
12380         port->ulp_busy--;
12381         mutex_exit(&EMLXS_PORT_LOCK);
12382 
12383         return;
12384 
12385 }  /* emlxs_ulp_statec_cb() */
12386 
12387 
12388 extern void
12389 emlxs_ulp_unsol_cb(emlxs_port_t *port, fc_unsol_buf_t *ubp)
12390 {
12391         emlxs_hba_t *hba = HBA;
12392 
12393         /* This routine coordinates protection with emlxs_fca_unbind_port() */
12394 
12395         mutex_enter(&EMLXS_PORT_LOCK);
12396         if (!(port->flag & EMLXS_INI_BOUND)) {
12397                 mutex_exit(&EMLXS_PORT_LOCK);
12398                 return;
12399         }
12400         port->ulp_busy++;
12401         mutex_exit(&EMLXS_PORT_LOCK);
12402 
12403         port->ulp_unsol_cb(port->ulp_handle, ubp, ubp->ub_frame.type);
12404 
12405         mutex_enter(&EMLXS_PORT_LOCK);
12406         port->ulp_busy--;
12407         mutex_exit(&EMLXS_PORT_LOCK);
12408 
12409         return;
12410 
12411 }  /* emlxs_ulp_unsol_cb() */